• 제목/요약/키워드: occupant risk criteria

검색결과 9건 처리시간 0.021초

측방충돌시 휠체어 탑승자의 위험도 분석에 의한 안전성평가 (A safety assessment by Risk Analysis Method on wheelchair occupant in side impact)

  • 김성민;김성재;강태건;전병호;김경훈;문무성;홍정화
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 추계학술대회 논문요약집
    • /
    • pp.16-16
    • /
    • 2003
  • In this study, for a safety assessment of wheelchair occupant in side impact, we used a dynamic sled impact test results. The test was carried out total 6 times and impact speed was 13g$\pm$0.43/28km/h$\pm$0.95, By using EURO SID-1 dummy, head performance criteria(HPC), abdominal peak force, etc. were measured. We evaluated wheelchair occupant safety by motion criteria(MC) which was measured by head, trunk and side deformation change of wheelchair and Head & Neck injury criteria(HNI) measured by using head and neck deformation angle and time relation. When we assumed that the maximum injury value in side impact was 100%, the results of motion criteria(MC) of wheelchair occupant were max 80.3, mim 32.3 and average 60.3%, Head & Neck injury criteria(HNI) value were max 118.4, min 14.5 and average 59.7%.

  • PDF

휠체어 탑재 차량의 전방ㆍ측방 충돌시 휠체어 탑승자의 위험도 분석에 의한 안전성평가 (A Safety Assessment by Risk Analysis Method on Wheelchair Occupant in Frontal & Side Impact of Wheelchair Loaded Vehicle)

  • 김성민;김성재;강태건;전병호;김경훈;문무성
    • 한국정밀공학회지
    • /
    • 제21권6호
    • /
    • pp.179-187
    • /
    • 2004
  • In this study, for a safety assessment of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle, a sled impact test was perfumed. Each test was carried out total 6 times, by using Hybrid III 50th-percentile male dummy in light weight and electric wheelchair. We estimate MC(Motion Criteria), CIC(Combined Injury Criteria), HIC(Head Injury Criteria), HNIC(Head and Neck Injury Criteria) based on measured data. Through this study, we make an assessment of risk analysis of wheelchair occupant and wheelchair. Through this study, safety standard of wheelchair is to be evaluated.

경량 휠체어 탑승자의 차량 전방충돌시 안전성 평가 (A Safety Assessment on Light Weight Wheelchair Occupant in Frontal Crash)

  • 김성민;김성재;강태건
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권1호
    • /
    • pp.15-21
    • /
    • 2003
  • 본 연구에서는 경량휠체어 탑승자의 차량 전방충돌시 안전성 평가를 위하여 동적 슬래드 충격실험을 하였다. 실험은 총 6회 시행하였으며 충격속도는 20g/48 $\pm$2km/h 였고, Hybrid III 50%ile 성인남자 인체모형을 사용하여 두부손상기준(Head Injury Criteria), 목의 굴전모멘트, 축 인장력, 전단력, 흉부 가속도. 두부, 휠체어, 무릎의 전방 쏠림량을 측정하였으며 미국자동차학회 규격인 SAE J2249에서 제안한 동작기준 (Motion Criteria)과 미국 제너럴모터스사의 자체기준(GM-IARV)인 복합상해기준(Combined Injury Criteria)을 이용하여 안전성평가를 하였다. 실험결과는 경량 휠체어 탑승자의 전방 충돌 시 최대 상해치를 100%로 봤을 때 휠체어와 탑승자 거동의 위험도지수 MC는 52%, 탑승자의 상체 위험도지수 CIC는 60.1% 였다.

노측 가드레일용 단부처리시설 성능평가기준 정립 및 개발 (A Study on Development & Establishment of Performance Evaluation Criteria for Guardrail End Treatments)

  • 주재웅;금기정;박제진;장대영
    • 한국도로학회논문집
    • /
    • 제10권1호
    • /
    • pp.123-134
    • /
    • 2008
  • 국내에 설치되고 있는 가드레일의 단부처리시설(end treatments)은 차량의 관통이나 전복을 유발할 수 있는 형상을 하고 있어 사고 시 탑승자가치명상을 입을 가능성이 매우 높다. 실제로 차량이 가드레일의 단부에 충돌하였을 경우, 가드레일이 차량내부를 관통하여 탑승자에게 직접적인 상해를 입히는 경우가 발생되고 있다. 본 연구에서는 미국과 유럽의 성능평가기준(performance evaluation criteria)에 근거하여 국내 실정에 적합한 단부처리시설에 관한 성능평가기준(안)을 제시하였다. 또한 외국의 설치사례 및 연구사례를 조사하여 단부처리시설의 mechanism을 파악하고 국내 도로환경 에 적합한 단부처리시설을 제안하였다. LS-DYNA 프로그램을 이용한 컴퓨터 시뮬레이션을 통해 제안된 단부처 리시설에 대한 성능을 검증한 결과 성능평가기준(안)에 모두 만족한 결과를 보였으며, 개발 단부처리시설에 대한 실물차량 충돌시험을 수행한 결과 성능평가기준(안)의 탑승자 보호성능, 단부처리시설의 거동, 충돌 후 차량의 거동을 모두 만족하였다. 국내 최초로 탑승자의 안전을 고려하여 개발된 단부처리시설이 고속도로나 국도에 설치된다면 단부충돌사고의 심각성을 감소시켜 도로의 안전성을 향상시킬 수 있을 것으로 사료된다.

  • PDF

BARRIER Ⅶ 프로그램을 이용한 가아드레일의 설계평가 및 지침 (Evaluation and Guideline for Design of Guardrail by BARRIER Ⅶ Program)

  • 우광성;조승현;고만기;김우
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1994년도 봄 학술발표회 논문집
    • /
    • pp.191-198
    • /
    • 1994
  • The nonlinear dynamic behaviors of guardrail established on the local or high way have been investigated using BARRIER Ⅶ program with respect to four design variables such as section type of beams and posts, impact angle, impact velocity and vehicle weight. Computer simulation programs are sophisticated analytical models for analyzing dynamic vehicle/barrier interactions and provide a relatively inexpensive alternative to full scale crash testing. This study has been focused on the structural adequacy, occupant risk, and vehicle trajectory. For this purpose, the maximum deflection and impact force have been calculated to design the clear zone and to analyze effect of impact attenuation. Also, the acceleration of vehicle and exit angle after collision have been computed to estimate the occupant risk. From this study, it is suggested that we should strengthen the design criteria of guradrail to prevent from disastrous traffic accidents.

  • PDF

승객보호용 랩을 적용한 저위험성 조수석 에어백의 미국 연방 자동차안전 기준법규에 의거한 시험과 평가 (Test and Evaluation based on Standard Regulation of USA Federal Automotive Safety of Assistant Driver's Seat Airbag at Low Risk Deployment Passenger Airbag using Passenger Protection Wrap)

  • 김동은;김진형;강명창
    • 한국기계가공학회지
    • /
    • 제15권1호
    • /
    • pp.61-67
    • /
    • 2016
  • The airbag is a widely accepted device for occupant protection in the automotive industry. As the injuries induced by airbag deployment have become a critical issue, revisions to Federal Motor Vehicle Safety Standard (FMVSS) 208 were required to create advanced airbags that can protect occupants of varying statures. In this paper, we developed a new low-risk deployment passenger airbag by adding the Passenger Protection Wrap (PPW). The PPW reduces the cushion impact force to the occupant in order to ensure pressure dispersion. A series of tests were conducted by using FMVSS 208 test procedures to demonstrate the proposed system. It was found that the system not only satisfied the injury criteria of FMVSS 208 but was also effective for protecting passengers of all sizes (male, small female, 3-year-old, 6-year-old).

설계변수에 의한 가아드레일의 동력학적 거동에 관한 연구 (A Study on Dynamic Behavior of Guardrail Associated with Design Variables)

  • 우광성;고만기;조승현;김우
    • 전산구조공학
    • /
    • 제7권2호
    • /
    • pp.89-99
    • /
    • 1994
  • 본 연구는 국도및 고속도로상에 설치되어 있는 철제 오성방호책인 가아드레일의 동력학적 거동분석을 4개의 설계변수, 즉 보와 지주의 단면형상 충돌시의 차량속도, 충돌각도 및 차량중량에 따라 BARRIER VII프로그램을 사용하여 수행하였다. 컴퓨터 모의해석 프로그램인 BARRIER VII은 비교적 정교한 것으로 실제의 실물충돌시험 결과와 근접한 결과를 보여줄 뿐 아니라 경제적인 이유로 차량과 방호책의 상호작용을 해석하는데 실물충동시험 대신에 많이 사용된다. 본 연구의 주된 관심은 구조적 적합성, 탑승자 위험도와 차량의 궤적이라 할 수 있다. 이 목적을 위해 최대처짐 및 최대충격력이 계신되어 안전노변대 설계와 충격완화 효과를 분석하는데 사용된다. 본 연구의 결과로부터 도로상의 대형참사를 예방하기 위해서는 가아드레일의 설계기순을 보다 강화할 필요가 있다고 판단된다.

  • PDF

휘발성 유기물질에 대한 차량 탑승시 노출 (In-Vehicle Exposure to Volatile Organic Compounds)

  • 조완근
    • 한국대기환경학회지
    • /
    • 제12권2호
    • /
    • pp.151-157
    • /
    • 1996
  • Vehicle occupant exposure to volatile organic compounds (VOCs) continues to be the subject of active research because of higher levels of VOCs in vehicles than in the surrounding ambient atmosphere and because of potential health risk. This study identified in-auto and in-bus exposures to 6 selected aromatic VOCs during rush-hour driving. A bus service route was selected to include an urban route (Taegu) and a suburban route (Hayang-Up) to satisfy the specified criteria of this study. The most abundant VOC concentration measured in this study was toluene. In-vehicle target Voc concentrations of the urban route were significantly different from those of the suburban segment. On the sum of average of the target VOCs, in-auto VOC concentration was about 1.5 times higher than in-bus VOC concentration. Based on the sum of average, in-automobile target VOC concentrations of this study were within the range of previous studies conducted in several cities of the United States, while in-bus VOC concentrations of this study were much lower than those of Taipei in Taiwan. In-vehicle VOC concentrations of present study significantly varied with sampling days, while they did not varied with driving period.

  • PDF

성능위주설계자들의 화재실 범위 설정 방식에 따른 소요피난안전시간(RSET) 비교 및 오차산정에 관한 연구 (A Study on Required Safe Egress Time (RSET) Comparison and Error Calculation in Relation to Fire Room Range Set Conditions of Performance Based Fire Safety Designers)

  • 백소나;최준호;홍원화;정종진
    • 한국화재소방학회논문지
    • /
    • 제30권3호
    • /
    • pp.73-78
    • /
    • 2016
  • '화재예방, 소방시설 설치유지 및 안전관리에 관한 법률'에 의하면 지하층 포함 30층 이상 고층 건축물에 대해 화재발생에 따른 위험성을 사전에 과학적으로 평가하여 재난발생 시 인명피해 및 재산피해를 최소화시킬 수 있도록 성능위주 설계를 실시해야 한다. 이에 따라 설계자는 컴퓨터 시뮬레이션 모델링 등 과학적인 분석 기법을 활용하여 거주자의 화재 및 피난 안전성을 평가하고 있다. 이 때, 인명안전성 평가를 위해 가용피난안전시간(ASET)과 소요피난안전시간(RSET) 을 산정하게 되는데 RSET 중에서도 가장 중요한 '반응시간(Response Time)'을 산정함에 있어 우리나라 사람들에 대한 실측 데이터에 기반한 명확한 법적 기준이 제시되지 못하고 있는 것이 현실이다. 이에 '소방시설 등의 성능위주설계 방 법 및 기준, 별표1'을 토대로 설계자별로 각각 상이한 값을 선택, 입력하거나 일본건축센터의 '건축방재계획지침'에 따라 계산하고 있는 경향을 보이고 있다. 따라서 본 연구에서는 최근 5년간 부산지역에서 성능위주 설계대상으로 지정된 고층 특정소방대상물을 대상으로 총 6명의 설계자가 실시한 성능위주 설계안 13건을 중심으로 RSET의 계산방법에 대해 비교 분석하였고, 특히 RSET 계산 시 결과값에 가장 큰 영향을 미치는 반응시간의 계산방법에 대한 결과를 비교하여 오차값을 산정하였다.