• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.299-308
• /
• 1996

In order to epidemiologically verify the tensile that cervical abfraction is developed from the tensile stress during lateral excursion, comparisons between the experimental group with cervical abfraction and the control group without cervical abfaction was made by exmining the occlusal wear and patterns from the dental cast. 1. The degree of occlusal wear in the experimental group with cervical abfraction was higher than that of control group without cervical abfraction.(p<0.05) 2. No significant difference in the occlusal wear pattern was found between the experimental group and the control group. 3. Higher degree of occlusal wear was found in the age group of abov 40 than that of below 40.(p<0.05) 4. There was a correlation between the degree of occlusal wear and the degree of cevical abfraction.(p<0.05) 5. There was a correlation between the age and the degree of cevical abfraction.(p<0.05) It can be concluded that occlusal stress is the etiologic factor of cervical abfraction, but no clear distinction was made between the relationship of tensile stress and cervical abfraction.

• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.269-277
• /
• 2008

The purpose of this study was to estimate occlusal tooth wear and bruxism severity in TMD patients, and evaluate the effectiveness of the present age estimation method by occlusal tooth wear in TMD patients. Takei's age estimation method was applied to 163 subjects(56 controls, 107 TMD patients). The author analyzed the degree of occlusal tooth wear from the difference between estimated age and actual age. The obtained results were as follows: 1. In all age group, occlusal tooth wear in TMD patients is higher than those in asymptomatic controls. In 20's age group, a statistically significant difference was found. 2. In both gender, occlusal tooth wear in TMD patients is higher than those in asymptomatic control. In male, a significant difference was found. 3. Occlusal tooth wear in TMD patients with bruxism is significantly higher than that in control. 4. We found no significant difference in bruxism severity and occlusal tooth wear among the RDC/TMD subgroups. 5. Application of Takei's method would be still useful for age estimation in Korean. In case of age estimation of TMD patients using occlusal tooth wear, evaluation of the bruxism severity and appropriate correction according to age, sex and difference of geographical location should be considered.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2023

A patient with para-functional habits can cause widespread teeth wear, along with temporomandibular joint disorders and myofascial pain syndrome in the masticatory muscles. Prolonged teeth wear is associated with a decrease in vertical occlusal dimension, leading to issues such as changes in facial morphology, decreased masticatory efficiency, and temporomandibular joint disorders. To achieve a three-dimensional full-mouth rehabilitation in patients with decreased vertical occlusal dimension, accurate diagnosis, analysis, and proactive treatment planning are essential. Prosthetic treatment accompanied by the restoration of physiological vertical occlusal dimension and the re-establishment of a normal occlusal plane is necessary. This case report presents a full-mouth rehabilitation case involving a patient with overall teeth wear, showing decreased vertical occlusal dimension which results in discomfort in the temporomandibular joint and aesthetic dissatisfaction. The report highlights the successful outcome achieved through the use of occlusal stabilization splint for temporomandibular joint stability and Gothic arch tracing devices for the re-establishment of intermaxillary relationships. Also, through adjustments and adaptation assessment using provisional prostheses, favorable outcomes were achieved both functionally and aesthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.121-129
• /
• 2020

From the point of view of oral rehabilitation, the treatment of extensive tooth wear requires a prosthetic approach. Physiological tooth wear is considered as a normal process and generally does not require treatment, but excessive tooth wear causes problems like inadequate occlusion and esthetics. Changes of occlusal vertical dimension should be made through accurate diagnosis and analysis. Also, the patient's adaptation to the changed occlusal vertical dimension should be assessed over time. This case was a 60-year-old male patient who complained of a decrease in chewing function and esthetics due to severe tooth wear. Full-mouth rehabilitation was performed with a tooth supported fixed prosthesis. An occlusal stabilization splint and provisional restoration were used to evaluate the adaptation to increased occlusal vertical dimension and induce a stable centric relation position. After that, monolithic zirconia prosthesis was delivered. We report this as a satisfactory functional recovery and esthetics.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.106-110
• /
• 2010

The severe wear of anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. The collapse of posterior teeth also results in the loss of normal occlusal plane and the reduction of the vertical dimension. This case report describes 77-year-old female, who had the loss of anterior guidance, the severe wear of dentition, and the reduction of the vertical dimension. Occlusal overlay splint was used after the decision of increasing vertical dimension by anatomical landmark, facial and physiologic measurement. Once the compatibility of the new vertical dimension had been confirmed, interim fixed restoration and the permanent reconstruction was initiated. This case reports that a satisfactory clinical result was achieved by restoring the vertical dimension with an improvement in esthetics and function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.153-159
• /
• 2019

Purpose: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. Materials and Methods: This study was conducted in a total of 308 teeth from 148 patients with palatal side abfractions in maxillary posterior teeth. The occlusal wears in maxillary premolars and molars with palatal side abfractions were classified and recorded. The classification was done by type of teeth, age, and gender, and in order to evaluate the statistical significance between groups, chi-square test was conducted (${\alpha}=0.05$). Results: Palatal side abfractions in maxillary posterior teeth were observed at the highest frequency in the 1st molars, and in all teeth with palatal side abfractions, more than one occlusal wear was observed. In classification by type of teeth, by age, and by gender, the occlusal wears in teeth with palatal side abfractions were observed at high frequency in cuspal inclined plane, central fossa, and marginal ridge, and there was a statistical significance (P < 0.05). Conclusion: Palatal side abfractions were observed at the highest frequency in maxillary 1st molars, and in all maxillary posterior teeth where palatal side abfractions were found, the occlusal wears were observed. And the occlusal wears were observed at high frequency in cuspal inclined plane, central fossa and marginal ridge. Such results show that abfraction is associated with occlusal force.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.320-329
• /
• 2022

Physiological wear of occlusal surface is inevitable throughout the lifetime, and considered to be normal. Pathologic wear, however, may cause fatal damage to the occlusal surface and destroy esthetics and proper anterior guidance. In such cases, rehabilitation of occlusal wear should be followed by thorough evaluation and diagnosis. In this present case, severe occlusal wear was found in the labial surfaces of mandibular anterior teeth and palatal surfaces of maxillary anterior teeth. Occlusal vertical dimension was evaluated and decided to be regained due to insufficient amount of restorative space. After determining new occlusal vertical dimension, diagnostic wax-up is usually performed to continue prosthodontic treatment. In this case with collapsed occlusion and loss of occlusal vertical dimension, conventional diagnostic wax-up was replaced with various digital devices. Diagnostic wax-up was digitally performed in the software and provisional prosthesis was fabricated with digital tools. With verification with provisional prosthesis, the entire dentition was rehabilitated with newly set occlusal vertical dimension and proper anterior guidance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.405-415
• /
• 2019

Excessive tooth wear can cause irreversible damage to the occlusal surface and can alter the anterior occlusal relationship by destroying the structure of the anterior teeth needed for esthetics and proper anterior guidance. The anterior deep bite is not a morbid occlusion by itself, but it may cause problems such as soft tissue trauma, opposing tooth eruption, tooth wear, and occlusal trauma if there are no stable occlusal contacts between the lower incisal edge against its upper lingual surface. The most important goal of treatment is to form stable occlusal contact in centric relation. In this case report, patients with decrease in vertical dimension and anterior deep bite due to maxillary posterior tooth loss and excessive tooth wear were treated full mouth rehabilitation with increased vertical dimension to regain the space for restoration and improve anterior occlusal relationship and esthetics. The functional and aesthetic problems of the patient could be solved by the equal intensity contact of all the teeth in centic relation (CR), anterior guidance in harmony with the functional movement, and restoration of the wear surface beyond the enamel range.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.269-279
• /
• 1987

The purpose of this study was to obtain basic data needed to clinical diagnosis and treatment by investigating the occlusal wear facets and those related factors. Sixty-six subjects, ranging from 24 to 26 years of age without symptoms of stomatognatic system, were selected from dental students in Chosun University. The area of occlusal wear facets was measured and twenty subjects were selected, and divided into two groups (Group I and Group II). The Group I had small facet areas, and the Group II had large facet areas. These two groups were investigated into right and left side wear facet areas, vertical overlaps, occlusion types of working side, masticatory muscle activities, and asymmetry of right and left side masticatory muscle function. The results were as follows: 1. The average wear facet areas of all subjects was $22.84{\pm}88.95mm^2$, and Group I and Group II were $96.12{\pm}32.00mm^2$ and $372.94{\pm}65.63mm^2$ respectively. 2. The right and left wear facet areas of Group I were $46.72{\pm}14.36mm^2$ and $49.40{\pm}21.46mm^2$ respectively. The right and left wear facet areas of Group II were $175.27{\pm}45.75mm^2$ and $185.69{\pm}45.37mm^2$ repsectively. 3. The vertical overlap of Group I and Group II was $3.88{\pm}0.81mm$ and $2.88{\pm}1.14mm $ respectively. 4. Most of the Group I had Canine protection occlusion (80%), and most of the Group II had Group function occlusion (80%). 5. The masticatory muscle activities at rest position, maximum bite, habitual chewing, right and left unilateral chewing were greater in Group II than in Group I, especially in the masseter muscle of working side at right and left unilateral chewing. (P<0.01). 6. The asymmetry of right and left wear facets and masticatory muscle activities were greater in Group II than in Group I. (P<0.01).