• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.320-329
• /
• 2022

Physiological wear of occlusal surface is inevitable throughout the lifetime, and considered to be normal. Pathologic wear, however, may cause fatal damage to the occlusal surface and destroy esthetics and proper anterior guidance. In such cases, rehabilitation of occlusal wear should be followed by thorough evaluation and diagnosis. In this present case, severe occlusal wear was found in the labial surfaces of mandibular anterior teeth and palatal surfaces of maxillary anterior teeth. Occlusal vertical dimension was evaluated and decided to be regained due to insufficient amount of restorative space. After determining new occlusal vertical dimension, diagnostic wax-up is usually performed to continue prosthodontic treatment. In this case with collapsed occlusion and loss of occlusal vertical dimension, conventional diagnostic wax-up was replaced with various digital devices. Diagnostic wax-up was digitally performed in the software and provisional prosthesis was fabricated with digital tools. With verification with provisional prosthesis, the entire dentition was rehabilitated with newly set occlusal vertical dimension and proper anterior guidance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.731-752
• /
• 1995

This study was performed to research the changes of masticatory system subsequent to randomly increasing the vertical dimension. The subjects were twenty seven persons, twenty two men and five women, with a mean age of 24.3(age ranged from 22 to 26). The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The occlusal splint increased vertical dimension was made on semiadjustable articulator. The subjects were randomly divided to three groups according to the vertical dimension, at which the occlusal splint was made. Group I occlusal splints were made at 2mm form the occlusal vertical dimension, group II occlusal splints at 5mm, group III occlusal splints at 8mm. The occlusal splints were almost weared for 2 weeks except meal-time. Clinical examination, muscle activity, changes of free-way space, movement of mandible and articular condyle were recorded and analyzed by means of biopak system(Bioresearch Inc, Millwakee Wisconsin.) and radiograph. 1. In clinical examination, various symptoms were reported by all subjects immediately after the placement of occlusal splint. At the end of experiment, symptoms were lasted by 1 subject in Group I, 2 subjects in Group II, 6 subjects in Group III. At the other subjects, the most of symptoms were disappered within 2-4 days after the placement of occlusal splints. 2. The average free-way space before the startof experiment was 1.77mm in all twenty seven subjects. Immediately after the placement of occlusal splints, 0.67mm at Group I, 0.49mm at Group II, 0.41mm at Group III, At 2 weeks after the placement of occlusal splint 0.93mm, 0.79mm, 0.78mm each other, 1.94mm, 1.77mm, 2.3 mm at immediately after the removal of occlual splint. At 1 week after the removal of occlusal splint, free-way space was recovered to the pre-experimental state 3. In cephalometric radiograph, following either the placement or the removal of the occlusal splints, the movements of mandible in an antero-posterior direction were not statistically significant(p>0.05). 4. In transcranial radiograghs of TMJ, 1 week after the placement of occlusal splint the movement of most superior position on condyle in all group shoed antero-inferior position than before the experiment(p<0.001) and also showed antero-inferior position in mandibular postural rest position than in certric occlusion(p<0.001). Following either the placement or the removal of the splints, the amount of movement of most superior position on condyle was group III. group II and group I in order(p<0.001). 5. In anterior temporal and superficial masseter muscle, muscle activity at postural rest position decreased at 2 weeks after the placement of occlusal splint in group I and group II (p>0.05), but significantly increased in group III(p<0.001). At 1 week after the removal of the occdusal splint, muscle activity at postural rest position was recovered preconditional state 6. In anterior temporal and superficail masseter muscle, muscle activity at clenching in all group was significantly decreased after placement of the occlusal splint, slightly increased during experimental period and recovered to the original state at 1 week after removal of the occlusal splint. But was not statistically significat(p>0.05)s.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.224-231
• /
• 2016

Severe dental attrition causes pathological changes of the tooth, imbalanced occlusion, and functional and aesthetic complications and can also result in a decrease in occlusal vertical dimension that can incur temporomandibular joint and muscular complications. Before restoring the vertical dimension with full-mouth prosthetic restorations, it is important to determine the amount of vertical lifting through complete diagnosis. In this study, a 59 year-old male patient with generalized attrition and fracture of teeth was treated with full-mouth zirconia prosthetic restoration in order to recover vertical dimension and aesthetics. Through the analysis of physiologic rest position and inter-canine distance, the treatment was planned for lifting 3 mm in vertical dimension. Interim crown were fabricated after full-mouth wax up, having the patient use for 6 months. The final monolithic and bilayered zirconia restorations were completed. The patient showed satisfaction in function and aesthetics for 18 months of follow-up since delivering the final restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.65-71
• /
• 2016

Gradual occlusal attrition is a normal process of aging. However, severe attrition causes pathogenic pulp, occlusal disharmony, functional disorder and esthetic problems. Alteration of vertical dimension should be considered for space regaining for tooth restoration, esthetic improvement or correction of occlusal relationship. Vertical dimension should be determined within the range of minimal invasive process satisfying patient's esthetic requirements and operator's functional goal. And patient's adaptation to newly determined vertical dimension should be assessed simultaneously. Deep overbite is not a simple problem of overbite, instead it is an usually complicated problem with anterior-posterior occlusal relationship. Considering these facts, appropriate restoration of edentulous part as well as improvement of anterior-posterior relationship should be performed to solve this fundamental problems. In this study, a 67 year-old male patient with many worn teeth and loss of posterior teeth was treated with removable partial denture at edentulous mandibular area to increase vertical dimension and fixed prostheses at dentulous maxillary and mandibular area. With these treatments, we attained a satisfactory result in functional and esthetic aspects as a report case.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.153-160
• /
• 2020

Gradual tooth wear is a natural process of aging, but pathological wear over physiologic ranges leads to functional and esthetic problems. The loss of posterior support may cause pathological wear of anterior teeth, which results in reduction of vertical dimension and disharmony of occlusal plane. To solve this problem, determination of proper vertical dimension considering centric relation is necessary. This case report presented 71-year-old male, who had the severe wear of lower anterior teeth due to loss of posterior support. By meticulous evaluation, a full mouth rehabilitation with elevation of vertical dimension was planned. After 8 months of follow-up, stable occlusal scheme is maintained and patient was satisfied with clinical outcome functionally and esthetically.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.119-132
• /
• 2023

The loss of posterior occlusal support due to tooth loss is likely to lead to compensatory protrusion and labial tilt of the anterior teeth, which may be accompanied by a deep bite and a decrease in vertical dimension. The patient may suffer from a decrease in masticatory efficiency, inaccurate pronunciation, facial appearance changes, and temporomandibular joint disorder, so stable occlusal formation with support of posterior occlusion and restoration of vertical dimension is necessary. We report the case of a patient with reduction of vertical dimension, and inaccurate pronunciation due to multiple tooth loss who underwent full mouth rehabilitation with increased vertical dimension accompanied by phonetic analysis and achieved satisfactory functional and aesthetic results.

• The Journal of the Korean dental association
• /
• v.54 no.6
• /
• pp.438-446
• /
• 2016

Severe tooth wear may cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance, pathogenic pulp and occlusal disharmony. Treating patients with severely worn dentition often requires full mouth rehabilitation with increasing vertical dimension. Proper diagnosis and treatment planning are important for esthetic and functional definitive restorations and the long term stability of the neuromuscular system and the TMJ. In this case, 66 year-old female presented with generalized worn dentition. Based on assessment, pathologic destruction of teeth structure on entire dentition was caused by masticatory force and diet habit without loss of vertical dimension. Subsequently, 3 mm increase of vertical dimension that based on incisor for tooth restoration and esthetic improvement was determined. After 8 weeks stabilization period with temporary fixed prostheses, definitive prostheses were fabricated. After 6 months follow up period, satisfactory outcomes were attained both functional and esthetic aspects through this procedure.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.61-71
• /
• 2012

PURPOSE. To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS. Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS. Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION. Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.33-43
• /
• 2023

Pathological wear across the entire dentition causes problems such as collapsed occlusal plane, reduced vertical dimension, anterior premature contact, inadequate anterior guidance, and tooth migration, thereby induce symptoms such as temporomandibular joint disorder, reduced masticatory efficiency, and tooth hypersensitivity. For the treatment of patients with excessive wear, evaluation of vertical dimension should be preceded along with analysis of the cause. The patient in this case was a 45-year-old female with a history of orthognathic surgery. Through clinical examination, radiographic examination, and model analysis, overall tooth wear, interdental spacing in the anterior maxillary region, retruded condylar position, and insufficient interocclusal space for prosthetic restoration were confirmed. Full mouth rehabilitation with increased vertical dimension was planned, the patient's adaptation to the new vertical dimension was evaluated with a removable occlusal splint and temporary prosthesis, and cross-mounting was performed based on the temporary restoration to fabricate the definitive zirconia prosthesis, maintaining the adjusted vertical dimension. It showed satisfactory functional and esthetic results through stable restoration of the occlusal relationship.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.143-152
• /
• 2023

Although tooth wear is a normal process due to aging, severe tooth wear causes various complications such as increased tooth sensitivity, loss of tooth structure, and pulp complications. In the treatment of patients with excessive tooth wear, the evaluation of loss of vertical occlusal dimension should be prioritized. If it is necessary to increase the vertical dimension to secure the restoration space, it is important to establish a treatment plan with the comprehensive analysis and determine the minimum vertical dimension elevation. In this case, 66-year-old male patient with severe worn dentition wanted to restore masticatory function and improve esthetic restoration. In order to determine the appropriate vertical dimension of the patient, we evaluated oral examination, radiographic examination, and diagnostic cast examination, and performed rehabilitation with minimum vertical dimension elevation. As a result of observation for 8 months, the definitive prosthesis was completed with contact of all teeth in centric occlusion, and proper anterior/posterior guidance. Through the above process, satisfactory aesthetic and functional outcomes were obtained.