• Applied Biological Chemistry
• /
• v.7
• /
• pp.29-33
• /
• 1966

This experiment was conducted to study the relationship between the energy value and the nitrogen content in the rat urine. Thirteen rats for ad libitum feeding group and 16 rats for two-meal group were employed in this experiment. The experimental period consisted of 22 days with a preliminary period of 10 days. During the last eight days of the experiment the urine was collected quantitatively. The rats fed two-meal per day excreted significantly (p<0.005) more nitrogen and energy in the urine than those fed ad libitum. A linear relationship between the energy concentration and nitrogen content was found. The urinary energy value was increased as the urinary nitrogen content was increased. A prediction equation was derived to compute the energy value from the content of nitrogen as follows: Y=8.924X+0.182 $S_{y{\cdot}x}=0.788$ where Y=urinary energy(kcal/100 ml) X=urinary nitrogen(gm/100 ml) Since the standard deviation of estimate is in small magnitude (0.788 kcal) when it is compared with the amount of intake of gross energy, digestible energy or metabolizable energy, this equation can be used safely to estimate the energy value from nitrogen content. Consequently, considerable amound of time and labor for the actual determination of energy can be saved. The ratio of energy to nitrogen was found to be 9.4 for ad adlibitum group and 8.6 for two-meal group. No significant difference between two group in this respect was observed.

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.203-215
• /
• 2007

Stability and mechanical deformation behavior of rock masses are highly dependent on the mechanical characteristics of contained discontinuities. Therefore, mechanical characteristics of the discontinuities should be considered in the design of tunnel and underground structures. In this study, direct shear tests for rough granite joints were carried out under constant normal stiffness conditions. Effects of initial normal stress, shear velocity, and surface roughness on the characteristics of shear strength and deformation behaviors were examined. Results of shear testing under constant normal stiffness conditions reveal that shear behaviors could be classified into two categories, based on the amount of decrease in shear stress at the Int peak shear stress. With initial normal stiffness increasing, it turned out that shear displacement at peak stress and the first peak shear stress increased, however friction angle and friction coefficient showed decrease. In case of shear stiffness and average friction coefficient, it turned out that they are not dependent on the initial normal stress. Minor effects of shear velocity on rough joints were observed in several shear quantities. However, the effects of shear velocity were insignificant regardless of the normal stress increase. Change of shear strength and deformation characteristics on joint roughness were examined, however, it turned out that the variations were attributed to deviation of shear test specimens.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.205-214
• /
• 2000

This study was performed to investigate the relationship between mandibular midline shift and anteroposterior first molar occlusal relation, and their effects on the mandibular height and the occlusal plane angle. For this study, 49 patients with temporomandibular disorders were selected. They did not show facial asymmetry and their facial midline coincide with maxillary dental midline. Upper and lower mandibular impression were taken and the casts were fabricated. Amount and direction of the mandibular midline shift and the anteroposterior shift between the two occluding first molars were measured on the casts. Several items related to height such as mandibular height from top of the articular surface of the condyle to curve changing point between antegonial notch and mandibular angle, condylar height which was the vertical distance from the articular surface to retroepicondyle of the condyle, and sigmoid height from the deepest point of sigmoid notch to the curve changing point and the occlusal plane angle were also measured on the panoramic and on the transcranial radiographs. Correlation between midline shift and anteroposterior first molar relation and comparison between right and left mandibular height by the midline shift and the first molar relation were analysed by SPSS windows program. The results of this study were as follows : 1. Mean amount of midline shift in the subjects with midline shift were 2.0mm for both side, respectively. The first molar relation of the ipsilateral side of midline shift showed Angle class II tendency and the contralateral side showed Angle class III tendency, which meant drift of the dentition to the side of the midline shift. 2. The occlusal plane angle on the panoramic radiograph were $13.0^{\circ}$ in right, and $12.5^{\circ}$ in left side, and their were no correlation between occlusal plane angle and mandibular midline shift and the first molar occlusal relation. 3. Angle's classification for both sides of the first molar relation were same in about half of all the subjects. Amount of deviation from class I first molar relation, however, were decreased in the contralateral side of observed side. 4. Mandibular height of the ipsilateral side to which mandibular midline shift showed tendency of lower than that of the contralateral side, and there was a tendency that the height was higher in class III subjects, then class II subjects, and lower in class I subjects. However, condylar height did not show any difference in the subjects with midline shift and also show no difference by the first molar occlusal relation.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.253-271
• /
• 2005

We have analyzed surface water temperature and seasonal stratification of lakes in the Han river system using time-series Landsat images and in situ measurement data. Using NASA equation, at-satellite temperature is derived from 29 Landsat-5 TM and Landsat-7 ETM+ images obtained from 1994 to 2004, and was compared with in situ surface temperature on river-type dam lakes such as Paro, Chuncheon, Euiam, Chongpyong, Paldang, and with 10m-depth temperature on lake-type dam lake Soyang. Although the in situ temperature at the time of satellite data acquisition was interpolated from monthly measurements, the number of images with standard deviation of temperature difference (at-satellite temperature - in situ interpolated temperature) less than $2^{\circ}C$ was 24 on which a novel statistical atmospheric correction could be applied. The correlation coefficient at Lake Soyang was 0.915 (0.950 after correction) and 0.951-0.980 (0.979-0.997 after correction) at other lakes. This high correlation implies that there exist a mixed layer in the shallow river-like dam lakes due to physical mixing from continuous influx and efflux, and the daily and hourly temperature change is not fluctuating. At Lake Soyang, an anomalous temperature difference was observed from April to July where at-satellite temperature is $3-5^{\circ}C$ higher than in situ interpolated temperature. Located in the uppermost part of the Han river system and its influx is governed only by natural precipitation, Lake Soyang develops stratification during this time with rising sun elevation and no physical mixture from influx in this relatively dry season of the year.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.260-269
• /
• 2021

BACKGROUND: Diquat dibromide is a fast-acting nonselective herbicide and plant growth regulator. In this study, in order to understand the possibility of unintentional pesticide contamination in the following crops, the phytotoxicity and transition of diquat dibromide residue in soil into the following crops such as pepper, radish, lettuce and corn have been assessed through phytotoxicity trial and residual evaluation in the unintentional contamination of the higher residual diquat dibromide. METHODS AND RESULTS: The pepper, radish, lettuce and corn were cultivated in the sandy soil and loam soil where the 35 mg/kg and 90 mg/kg diquat dibromide were applied, respectively. Mild growth inhibition symptoms were observed in radish, lettuce and corn crops at the 90 mg/kg- diquat dibromide treatment on the 30 day of cultivation. Diquat dibromide was analyzed using liquid chromatography QTRAP (LC-MS/MS). The recovery rates of diquat dibromide from soil and crop were determined within range from 89.1 to 116.4% with relative standard deviation less than 14.7%. Diquat dibromide residues in soil were found to be 23.90-30.22 and 69.59-82.57 mg/kg from the 35 mg/kg and 90 mg/kg of diquat dibromide-treated soil, respectively after 30 days of crop cultivation. This result implicates that diquat dibromide did not convert to metabolites and remained mostly in the soil, even though it was partially decomposed during crop cultivation. In addition, the diquat dibromide in pepper and radish that were grown for 47 days, and lettuce and corn that were cultivated for 30 days were detected to be 0.01 mg/kg or less in the sandy loam and loam soil where the 90 mg/kg diquat dibromide was applied. CONCLUSION(S): Diquat dibromide did not cause severe phytotoxicity in the following crops as well as it did not uptake and distribute to the following crops, even though it was considered to be residual in the soil.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.93-102
• /
• 2019

In this study, in order to analyze the possibility of observing a typhoon track based on the Global Navigation Satellite System(GNSS), Typhoon NARI, the 11th typhoon of 2007, was analyzed in terms of the typhoon track as well as the local variation of perceptible water over time. The perceptible water was estimated using data obtained from observatories located on the typhoon track from Jeju to the southern coast of Korea for a total of 18 days from September 7(DOY 250) to September 24(DOY 267), 2007, including the period when the observatories were affected by the typhoon at full-scale, as well as one previous week and one following week. The results show that the trend of the variation of perceptible water was similar between the observatories near the typhoon track. Variation of perceptible water over time depending on the development and landing of the typhoon was distinctively observed. Several hours after the daily maximum of perceptible water was found at the JEJU Observatory, the first struck by the typhoon on the typhoon track, the maximum value was found at other observatories located on the southern coast. In the observation period, the time point at which the maximum perceptible water was recorded in each location was almost the same as the time point at which the typhoon landed at the location. To analyze the accuracy of the GNSS-based perceptible water measurement, the data were compared with radiosonde-based perceptible water data. The mean error was 0.0cm, and the root mean square error and the standard deviation were both 0.3cm, indicating that the GNSS-based perceptible water data were highly accurate and precise. The results of the this study show that the GNSS-based perceptible water data may be used as highly accurate information for the analysis of typhoon tracks over time.

• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.493-503
• /
• 2019

This study presents a new method of estimating the size distribution of river bed gravel through image processing. The analysis was done in two steps; first the individual grain images were analyzed and then the grain particle segmentation of river-bed images were processed. In the first part of the analysis, the relationships (long axes, intermediate axes and projective areas) between grain features from images and those measured were compared. For this analysis, 240 gravel particles were collected at three river stations. All particles were measured with vernier calipers and weighed with scales. The measured data showed that river gravel had shape factors of 0.514~0.585. It was found that the weight of gravel had a stronger correlation with the projective areas than the long or intermediate axes. Using these results, we were able to establish an area-weight formula. In the second step, we calculated the projective areas of the river-bed gravels by detecting their edge lines using the ImageJ program. The projective areas of the gravels were converted to the grain-size distribution using the formula previously established. The proposed method was applied to 3 small- and medium- sized rivers in Korea. Comparisons of the analyzed size distributions with those measured showed that the proposed method could estimate the median diameter within a fair error range. However, the estimated distributions showed a slight deviation from the observed value, which is something that needs improvement in the future.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.402-411
• /
• 2018

This study was conducted to develop ingrowth estimation equations on Pinus densiflora found in Gangwon Province and in the center of Korean Peninsula, based on the National Forest Inventory (NFI)'s permanent sampling plot data. For this study, identical sampling plots in $5^{th}$ and $6^{th}$ NFI data were collected in order to identify ingrowth amounts for the last 5 years. Following two-stage approaches in developing the ingrowth estimation equations, the logistic regression model was used in the first stage to estimate the ingrowth probability. In the second stage, regression analysis on sampling plots with ingrowth occurrence was used to estimate the ingrowth amount. A candidate model was finally selected as an optimal model after a verification based on three evaluation statistics which include mean difference (MD), standard deviation of difference (SDD) and standard error of difference (SED). In results, a logistic regression model based on the number of sampling plot which did not result in ingrowth (model VI), was selected for an ingrowth probability estimation equation and exponential function including the species composition (SC) variable was optimal for an ingrowth estimation equation (model VII). The ingrowth estimation equations developed in this study also evaluated the estimation ability in various forest stand conditions, and no particular issue in fitness or applicability was observed.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.55-64
• /
• 2019

Stress is accompanied by changes in the responses of the autonomic nervous system, and the heart rate variability (HRV) index is a quantitative marker that reflects autonomic responses induced by stressors. In this study, we observed changes in the autonomic responses induced by combinations of 30% oxygen administration and color light for stress relaxation. In all, 42 participants produced stress symptoms over the preceding two weeks, as rated on the stress response scale. After stress assessment, they were exposed to three therapeutic conditions, and electrocardiogram (ECG) signals were recorded before, during, and after therapy. The three therapy conditions consisted of only 30% oxygen administration with white light, a combination of 30% oxygen and orange light, and a combination of 30% oxygen and blue light. The HRV indices extracted from ECG signals were heart rate (HR), the standard deviation of the RR interval (SDNN), the mean square root of consecutive RR interval difference values (RMSSD), the low frequency component of HRV (LF), the high frequency component (HF), and the LF/HF ratio. These indicators were used to compare mean values before and after therapy. The results showed that HR and the LF/HF ratio were significantly lower after therapy than before it. In particular, the condition with 30% oxygen and blue light yielded significantly greater RMSSD and HF increases, as well as decreases in LF/HF ratio than in other two conditions. Our results suggest that therapy with 30% oxygen and blue light is the most effective for the relaxation of stress, which implies autonomic balance by parasympathetic activation.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.616-626
• /
• 2018

The quality standards of solid refuse fuel (SRF) define the values for 12 physico-chemical properties, including moisture, lower heating value, and metal compounds, according to Article 20 of the Enforcement Rules of the Act on Resource Saving and Recycling Promotion. These parameters are evaluated via various SRF Quality Test Methods, but problems related to the heavy metal content have been observed in the microwave acid digestion method. Therefore, these methods and their applicability need improvement. In this study, the appropriate testing conditions were derived by varying the parameters of microwave acid digestion, such as microwave power and pre-treatment time. The pre-treatment of SRF as a function of the microwave power revealed an incomplete decomposition of the sample at 600 W, and the heavy metal content analysis was difficult to perform under 9 mL of nitric acid and 3 mL of hydrochloric acid. The experiments with the reference materials under nitric acid at 600 W lasted 30 minutes, and 1,000 W for 20 or 30 minutes were considered optimal conditions. The results confirmed that a mixture of SRF and an acid would take about 20 minutes to reach $180^{\circ}C$, requiring at least 30 minutes of pre-treatment. The accuracy was within 30% of the standard deviation, with a precision of 70 ~ 130% of the heavy metal recovery rate. By applying these conditions to SRF, the results for each condition were not significantly different and the heavy metal standards for As, Pb, Cd, and Cr were satisfied.