• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.97-104
• /
• 2015

Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.127-130
• /
• 1999

Physical properties and microstructure of slag blended cement were investigated to evaluate the influence of sulphates and chlorides. The compressive strength developed as high chloride content dust and gypsum added and accordingly the microstructure modification was showed. The deviation of pore size distribution and hydrates was also observed. From these results we discussed optimum condition of gypsum and high chloride content dust leading to physical properties in this study.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.183-185
• /
• 1999

가우시안 모델의 부정확성의 중요한 요인중의 하나는 수평확산폭($\sigma$$_{y}$)과 연직확산폭($\sigma$$_{z}$)이다. (이와김,1992) 가우시안 모델에서 사용되는 확산폭 산출방법인 Pasquill-Gifford Scheme은 미국 Nebraska 주 O'neill 부근 풀로 덮힌 평탄한 지형에서 확산 실험을 수행한 Prairie grass project의 결과로 연기의 확산폭은 각 안정도 계급(A-F)별로 거리의 함수로 나타낸 식을 이용하고 있다.(중략)략)

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.759-765
• /
• 2004

HEC-RAS model is used for estimation of rating-curve of Musung in Wi stream. Discharge is computed from stage estimated by HEC-RAS model, is compared with the discharge of water surface slope method. The relative deviation of observed and computed discharge is 5.37%, and shows as a good results. A rating-curve by HEC-RAS model shows better results than by water surface slope method.

• Journal of the Korean Statistical Society
• /
• v.12 no.2
• /
• pp.110-114
• /
• 1983

In this paper, a random subset selection procedure for the choice of the k best objects out of n primary measurements $Y_t$ is considered when only the associated measurements $X_t$ are available. In contrast to Yeo and David (1992), where only the ranks of the X's are needed, the present uses the observed X-values. The approach is illustrated numerically when X and Y are bivariate normal and the standard deviation of X is known.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.64-65
• /
• 1997

A method for calculation of the estimated standard deviation (ESD) of physical quantities which are functions of experimentally observed variables has been shown.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.31-40
• /
• 1995

This study was conducted to get best fitting frequency distribution for the annual run- off and to simulate long series of annual flows by single-season first order Markov Model with comparison of statistical parameters which were derived from observed and synthetic flows at four watersheds in Seom Jin and Yeong San river systems. The results summarized through this study are as follows. 1. Hydrologic persistence of observed flows was acknowledged by the correlogram analysis. 2. A normal distribution of the annual runoff for the applied watersheds was confirmed as the best one among others by Kolmogorov-Smirnov test. 3. Statistical parameters were calculated from synthetic flows simulated by normal dis- tribution. In was confirmed that mean and standard deviation of simulated flows are much closer to those of observed data than except coefficient of skewness. 4. Hydrologic persistence between observed flows and synthetic flows simulated was also confirmed by the correlogram analysis. 5. It is to be desired that generation technique of synthetic flow in this study would be compared with other simulation techniques for the objective time series.

• Journal of Photoscience
• /
• v.12 no.2
• /
• pp.57-61
• /
• 2005

The ground and excited state dipole moments of Coumarin 450 (C 450) laser dye were measured at room temperature in several solvents of varying dipole moments. The ground state dipole moment (${\mu}_g$) is estimated by using the modified Onsagar model and the excited state dipole moments (${\mu}_e$) were estimated by the method of solvatochromism as well as by utilizing the microscopic solvent polarity parameter ($E^N_T$). Further, the deviation of some of the points from the linearity of the $E^N_T$ versus Stokes shift indicates the existence of specific type of solute-solvent interaction. The excited state dipole moment of C 450 were found to be higher than those of the ground state and is interpreted in terms of the resonance structure of the molecule. A reasonable agreement has been observed between the values obtained by the method of solvatochromism and modified Onsagar model. It is observed that, corresponding to cyclohexane solution, the fluorescence maxima shift towards the red region with increasing the polarity of the solvents, hence the transition involved are of ${\pi}-{\pi}^*$ type.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.177-180
• /
• 2005

The specified tensile strength provided by the manufacturer is determined on the basis of the reliable lower limit ($X-3{\sigma}$ : X=average tensile strength, $\sigma$=standard deviation) obtained from the material test results. Most of these data, however, are based on the test results of 1 layer of FRP sheet. Also, the partial strength reduction factor for strengthening RC members with FRP is based on the small-scale model tests. But, the failure mechanisms of small-scale model tests are reported to be different from those of the full-scale tests. This paper present the test results of full-scale RC beams strengthened with multi-layer GFRP sheets up to 3 layer as well as the material tests. From the material tests, it was observed that the average tensile strengths of GFRP sheets are decreased as the number of layer are increased. Also the premature debonding failure of RC beams strengthened with multi-layer GFRP sheets are observed in inverse proportion to the number of GFRP sheets

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.116.2-116.2
• /
• 2011

We investigate Faraday rotation measure (RM) toward high Galactic latitudes due to the Galactic magnetic field (GMF). The Galactic contribution to RM comes from the global component and the turbulent component of the GMF, and we newly model the latter by incorporating data of MHD turbulence simulations. We find that for the turbulent velocity of ~50 km/s, the standard deviation of the RM due to the GMF toward high Galactic latitudes is close to the observed value, several rad m^{-2}. Yet, the predicted second-order structure function (SF) has values substantially smaller than the observed ones at separation angles of <~ several degree. This suggests that the intergalactic magnetic field (IGMF) significantly contributes to RM toward high Galactic latitudes, particularly at small angular scales. Our work proposes a strategy for surveys to explore the IGMF with LOFAR, ASKAP, MeerKAT, and SKA.