• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2013

Because the human voice is produced through vibration of the vocal cords during the exhalation of airflow, it is important to observe the vibration pattern of the vocal cords in patients complaining of voice changes. However, it is not easy to observe the actual vibration pattern of the vocal cord because it vibrates so fast that it cannot be observed by the naked eye and it is located deep in the throat. Recently, with advances in instruments, including laryngoscopes and video camera systems, the vibration pattern of the vocal cords can now be observed. However, considering that present video camera systems can detect 30-60 images per second and the vocal cord vibrates at 100-200 and 200-300 times per second in men and women, respectively, it is not possible to record the whole mucosal wave of the vocal cord in real time. To overcome this limitation, a stroboscope, which converts fast movements of the vocal cord into slower images, has been developed. Since then, several instruments were developed to examine vocal vibration pattern. However, each instruments have advantages and disadvantages. Therefore, we should know about these things to apply them in patients with voice problem.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.921-925
• /
• 2007

This paper investigates the information related to the radiated sounds during treatment using the extracorporeal shock wave lothotriptor(ESWL). First, we observe the vibration of the objects from the radiated sounds and extract the information about the change of the peak frequency from the relation between the vibration and the radiated sounds. Next, we observe the change of the peak frequency according to the position of the focus and demonstrate that it is more difficult to vibrate objects exactly at the focal point than above or below the focus of the ESWL device. Lastly, we analyze the relation between the cavitation and the radiated sounds and examine the benefiting condition for the object fragmentation.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.533-537
• /
• 2013

Space telescope optics is one of the major parts of any space mission used to observe astronomical targets or the Earth. This kind of space mission typically involves bulky and complex opto-mechanics with a long optical tube, but attempts have been made to observe a target with a small satellite. In this paper, we describe the optical design of a reflecting telescope for use in a CubeSat mission. For this design we adopt the off-axis segmented method for astronomical observation techniques based on a Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and the secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can yield a 0.383 degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation.

• Journal of The Korean Association of Information Education
• /
• v.22 no.6
• /
• pp.701-710
• /
• 2018

In the 4th Industrial Revolution, it is a time when all the devices and people interact to create new added value. Software education is necessary in elementary school because what is more important is software. However, until now there is a lack of teaching and learning methods for software education in elementary school. In this paper, IDOL model is proposed as a method to solve this problem. statements for elementary students. The idol model is learning through observe, to implement, to diversify. In the implementation, the elementary students are to make it quickly, In the diversification, it is variously changing the things that have been made, and observation how the changed things are different. A model is verified by a group of experts consisting of elementary school teachers.

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.227-235
• /
• 2018

Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.

• Structural Engineering and Mechanics
• /
• v.83 no.4
• /
• pp.563-576
• /
• 2022

This study aimed to evaluate the progressive collapse potential of buildings designed using conventional design codes for the merchant occupancy classification and subjected to a sudden column failure. For this purpose, three reinforced concrete buildings having different story numbers were designed according to the seismic design recommendations of TSCB-2019. Later on, the buildings were analyzed using the GSA-2016 and UFC 4-023-03 to observe their progressive collapse responses. Three columns were removed independently in the structures from different locations. Nonlinear dynamic analysis method for the alternate path direct design approach was implemented for the design evaluation. The plasticity of the structural members was simulated by using nonlinear fiber hinges. The moment, axial, and shear force interaction on the hinges was considered by the Modified Compression Field Theory. Moreover, an existing experimental study investigating the progressive collapse behavior of reinforced concrete structures was used to observe the validation of nonlinear fiber hinges and the applied analysis methodology. The study results deduce that a limited local collapse disproportionately more extensive than the initial failure was experienced on the buildings designed according to TSCB-2019. The mercantile structures designed according to current seismic codes require additional direct design considerations to improve their progressive collapse resistance against the risk of a sudden column loss.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• Journal of Biomedical Engineering Research
• /
• v.44 no.3
• /
• pp.218-224
• /
• 2023

This study aimed to analyze the coordination of muscle and muscle fatigue between biceps, lateral deltoid, and anterior deltoid during dumbbell side lateral raise using bio-signal. One male subject performed dumbbell side lateral raise with 3% of 1RM dumbbell at the rate of 30bpm until failure (8 minutes). While performing, ECG were recorded to observe the participant's performance. EMG were recorded from biceps, lateral deltoid, and anterior deltoid for observing coordination and fatigue. ECG were analyzed in time and frequency domain to observe Heart rate, normLF, normHF. Changes in heart rate, normLF, and normHF indicate that the sympathetic nervous system is activated, while changes in median frequency (MDF) indicate the occurrence of muscle fatigue. Moreover, the coordination relationship of muscle changed. The correlation of MDF between each muscles indicated that lateral deltoid is associated with biceps and anterior deltoid. These results showed that our study can contribute to improving understanding of muscle fatigue and muscle coordination relationships.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.4
• /
• pp.410-415
• /
• 2010

Banchandeungsok is a book written by a person who lived in the Cheongju area located in northern Chungcheong Province. The literature is regarded as a useful source for showing types of local food in the 1910s, so it was purchased by the National Folk Museum in 2007. The writer categorized dishes described in the recipe section of the book into side dishes, snacks, rice cakes, drinks, and miscellaneous. Following this, each category was distinguished by the name of the dish, the main material, the side material, and the cooking method is presented in tables. Thus, the food culture of Chungcheong Province was arranged based on the above categorized contents. The material from the product and the outside which grow spontaneously divided with the product which flows. The case which is a product the outside, went through what kind of process and could flow toward Sangshin village in Cheongju area probably, to observe tried. The area and time were clear Eumsikdimibang and Gyuhapchongseo Jusigui with comparisons. So tried to observe the time of 1910's Cheongju area culture Dietary life time and a regional feature.

• Journal of Hydrogen and New Energy
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2022

The test method on the Type II high-pressure hydrogen storage tanks made of the metal wire hoop winding is a complex and high risk. Also closeup on the tank being test is difficult. In this study, we studied a mechanical test method for a high-pressure hydrogen tanks. This method must be simple, risk-free and possible to observe the change in microscopic behavior of a metal wire on a liner. As the results, it was possible to observe the microscopic behavior on the metal wire by the mechanical test method. Also, a simple and risk-free test was possible compared to the conventional test method for high pressure hydrogen tanks.