• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.447-463
• /
• 1997

The purpose of this study was to evaluate the effectiveness of copal varnish and five bonding agents(Scotchbond Multi-Purpose Plus Dental Adhesive System, Panavia 21, All Bond 2, Superbond D-Liner II plus, Fuji Duet) in reducing microleakage under amalgam restorations. Class V cavity were prepared on both buccal and lingual surface of sixty extracted human molars with cementum margin and were filled with different kinds of liners and amalgam. All teeth were stored at $37^{\circ}C$ in physiologic saline solution. After 1 week they were thermally stressed for 500 cycles between 5 and $55^{\circ}C$ in baths containing 0.5 % basic fuchsin dye. The dye penetrations were observed with a stereomicroscope. Scanning electron micrographs were taken of representative tooth sections from each group to assess the nature of the tooth/liner/amalgam interface. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The results were as follows ; 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. At the dentin and enamel margins, the leakage value of Copalite-lined group showed significantly higher than that of no liner group (p<0.05), but showed significantly lower than that of bonding agent lined-groups (p<0.05). 3. There was no significant difference between the bonding agent lined-groups (p>0.05). 4. On the backscattered scanning electron microscopy observation, discontinuous gaps were observed between amalgam and dentin in the bonding agent-lined amalgam restorations and the bonding agents appeared to fill the gap space and were mixed with amalgam particles. At the amalgam/tooth interface, unsealed dentin and continuous gaps were found in both unlined and Copalite-lined restorations.

• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1356-1362
• /
• 2005

The purpose of this study os to investigative the effect of Carrageenan-Induced Pain on lower limb muscle and ligament of rat. To evaluate pain mechanism in muscle and ligament, pain was induced by the injection of 2% $0.1m{\ell}$ carrageenan into the left lower limb muscle of rats after rats were anesthesized with 3% enflurane. Rats were killed on 72 hours after pain induction under the anesthesia. anterior rectus femoris muscle and its ligament were removed from rat hind limb. Morphological changes of them were peformed by the observation of light and electron microscopes. In the light microscopic findings, the muscle cells were polyheadral and situated with each other without small gap in control group. nucleus of cell was seen along the cell margin, and muscle cell groups were divided by regular narrow gap in cross section. In the pain-induced group, muscle cell groups were divided each other by the irregular gap, and some of groups formed larger than other cell groups by the fusion. Intercellular gap of most cell groups were increased compared with control groups. And also, perimysium of muscle cell groups was swollen in cross section. In control group, muscle cells contacted each other closely and each cell was divided by perimysium. The intracellular gaps were not seen between myofibrills, and also striations were well defined between muscle cells in longitudinal section. In pain-induced group, muscle cells were divided by the small intracellular gaps. And also, muscle cell showed many a short cross or longitudinal intercellular gaps in longitudinal section. In light microscopic findings of control group, tendon was composed with many tendon fibers contacted each other closely without gap. The free margin of tendon was fused, and apso the tendon fibers did not invaded between muscles. In pain-induced group, tendon was divided small groups by intertendinous gap, and also the margin of tendon divided by small groups. In the free margin, tendon invaded into muscle cells, and also fibroblasts between tendon fibers were long and lance-shaped. From these results, it is suggested that pain induction by carrageenan injured rat skeletal muscle and ligament by the morphological changes.

• 한국측량학회지
• /
• 제24권1호
• /
• pp.9-18
• /
• 2006

본 연구는 GPS 데이터 해석 시 정밀도를 높이고 현장에서 관측시간 내 GPS 측량의 적절성 및 재측 여부 등을 직접 결정할 수 있도록 GPS 데이터 품질관리 프로그램을 개발하는 것에 그 목적이 있다. 본 연구에서 개발된 GPS_QC 프로그램은 관측시간 내 위성의 기하학적 배치(DOP)와 다중경로 오차량, 전리층 지연량 및 사이클 슬립 등의 품질관리 인자(quality control parameters)를 RINEX 형식의 GPS 관측데이터로부터 직접 계산이 가능하도록 설계되었으며, 이러한 품질관리 인자는 시계열 형태와 그래프로 제공된다. GPS_QC 프로그램은 일반 사용자들이 다루기 어려웠던 기존의 복잡한 GPS 데이터 품질 확인을 간편하게 수행할 수 있도록 함으로써 실제 현장에서 잘못된 GPS 관측에 따른 재측여부 등을 직접 결정할 수 있게 함으로써 시간적 경제적 손실을 절감시키고, GPS 위치해석 시 정밀도를 높일 수 있을 것으로 판단된다.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.522-527
• /
• 2022

객체추적은 이전시간에서 추정한 위치와 현재 관측 데이터를 바탕으로 객체의 위치를 연속적으로 추적하는 신호처리 분야이다. 이 논문에서는 3개의 RNN을 서브모듈로 가지는 적응형 스케일조절 신경망을 이용해 입력 데이터의 스케일을 스스로 조절하여 추적할 수 있는 신경망을 제안한다. 객체 추적 성능을 평가하기 위해 객체가 조각별 등가속운동을 하는 1차원 객체 운동 모델에서 제안하는 시스템, 칼만 필터와 최대우도기법의 추적 성능을 비교한다. 그 결과 제안하는 알고리듬의 성능이 평균제곱근오차 기준으로 최대우도기법과 칼만필터보다 다양한 상황에서 전반적으로 우수하며 관측잡음이 커질수록 성능격차가 더 커지는 것을 보인다.

• Journal of Periodontal and Implant Science
• /
• 제29권2호
• /
• pp.415-433
• /
• 1999

Implant stability is the key to long-term successful outcome for osseointegrated implants. To evaluate the initial healing response of bone around HA-coated implants without primary bone contact. 21 HA-coated thread type implants(STERI-OSS?) were placed in the femurs of 5 mongrel dogs, about 1-year old. Implants, 8 mm in length and 3.8mm(experimental 1group), 5.0mm(experimental 2group) and 6.0mm(control group) in diameter, were inserted after 3 holes of 6.0mm in diameter and 10mm in depth were prepared in the surgical sites each dog. Implants were supported by only nonresorbable membrane($Teflon^{(R)}$), in order to prevent the ingrowth of upper soft tissue into the gap between bone and implant, and to maintain each implant to be positioned in the center of the drilled hole. 9 implants with different diameters were inserted in 3 dogs for histologic observation, and 12 implants were inserted in 2 dogs for mobility test and removal torque test. Fluorescent dyes were injected for the observation of new bone formation in order of $Terramycin^{(R)}$, Arizarin $Red^{(R)}$, and $Calcein^{(R)}$ at an interval of 2 weeks. 3 dogs were sacrificed for histologic observation at 4, 8, and 12-week after placement. Light microscopy and confocal laser scanning microscopy were used to qualitatively characterize the bone around HA-coated implant. 2 dogs were sacrificed for mobility test($Periotest^{(R)}$, Simens AG, Bensheim, Germany) and removal torque test($Autograph^{(R)}$ AGS-1000D series, Japan) at 8 and 12-week after placement The results were as follows: 1. Histologic observation showed that osseointegration occurred to both control and experimental groups as time lapse, but delayed bone healing was revealed in 3.8mm group (experimental 1group), compared to contrtol group and 5.0mm group (experimental 2group). 2. The mobility test showed that the experimental groups had no distinguishable movement during experimental periods of 8 and 12-week, and there was no difference in mobility depending on the gap between bone and implant, and time lapse. 3. The removal torque forces were increased depended on the gaps decreasing between bone and implant, and time lapse. The results suggest that HA-coated implant without primary bone contact, based on guided bone regeneration could obtain its stability in all experimental groups as time lapse, but bone healing was delayed in experimental group of 3.8mm. And the results suggested that studies on correlationship between mobility test and removal torque test for implant stability would be necessary.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.163-167
• /
• 2016

Inverter surge resistant enameled wire was prepared with an organic/inorganic hybrid nanocomposite, and the effect of ambient temperature on the insulation lifetime of the enameled wire in the form of twisted pair was studied by a withstanding voltage tester. The organic polymer was Polyesterimide-polyamideimide (EI/AI) and the inorganic material was a Nano-sized silica (average particle size : 15 nm). The enamel thickness was 50 μm and the ambient temperature was 100, 150, 200, and 250, respectively. Transmission electron microscopy (TEM) observation showed that Nano-sized Silica were evenly dispersed in EI/AI. There were many air gaps in a twisted pair, therefore, when voltage was applied to the twisted pair, enamel erosion took place in the air gap area because of partial discharge accordi, ng to Paschen’s law. As ambient temperature increased, insulation lifetime decreased according to Arrhenius relationship, which was explained by the increasing mobility of polymer chains in EI or AI. And insulation breakdown voltage value at 10 kHz was 1,864.5 sec (31.1 min), which is 1.9 times higher than at 20 kHz, 981.6 sec (16.4 min).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.366-366
• /
• 2016

Nanoscale observation of attachment systems of animals has revealed various exquisite multiscale architectures for essential functions such as gecko's locomotion, beetles' wing fixation, octopuses' sucking and crawling. In particular, the hierarchical 3-dimensional hexanonal nano-architectures in the tree frog's adhesion is known to have the capability of the enhancement of adhesion forces on the wet or rough surfaces due to the conformal contacts against rough surfaces and water-drainable micro channels. Here, we report that tree frog-inspired patches using unique artificial 3-dimensional hexagonal structures can be exploited to form reversibly enhanced adhesion against various highly curved and rough surfaces in dry and wet condition. To investigate the adhesion effect of micro-channels, we changed the arrangement of microstructure and spacing gaps between micro-channels. In addition, we introduced the 3-dimensional hexagonal hierarchical architectures to artificial patches to enhance to conformal contacts on the various rough surfaces such as skin and organs. Using the robust adhesion properties, we demonstrated the self-drainable and comfortable skin-attachable devices which can measure EKG (electrokardiogramme) for in-vitro diagnostics. As a result, bio-inspired programmable nano-architectures can be applied in versatile devices such as, medical patches, skin-attachable electronics etc., which would shed light on future smart, directional and reversible adhesion systems.

• 한국과학교육학회지
• /
• 제5권1호
• /
• pp.35-47
• /
• 1985

It is well known that high school girls' mean achievement levels in science tests are lower than high school boys' and that fewer women than men are employed as scientists and engineers pursue scientific careers. Many research attributed the sex difference in achievement level in science and the lack of women in science among others, to the experiential differences in scientific activities and the differences in attitudes toward science and scientists. Therefore, the study had its object to examine the sex difference by high school students in scientific experience and attitudes toward science and scientists. The differences in science experiences were identified at eight schools over rural and urban areas in Kangwon province. Science activities surveyed included use of experimental materials and instruments, observation of scientific phenomena, and extracurricular scientific activities. Attitude scale contained the nature of science, scientific research methods and philosophical views held by scientists. The study found sex differences in scientific experiences and attitudes. i. e.: fewer high school girls than boys had experience with scientific activities, especially with extracurricular activities; however, girls had more positive attitude toward science and more active desire to participate in science. Consequently, the study implies that, in order to narrow the gaps between achievement levels for boys and girls, science education should take consideration of the sex difference in experiences with and attitudes toward science.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.443-448
• /
• 1996

In order to plasma-sulfnitride by combining ion-nitriding of a steel and sputtering of MoS$_2$, chromium-molybdenum steel was plasma-sulfritrided using hollow cathode discharge with parallel electrodes which are a main of the steel and a subsidiary cathode of $MoS_2$. The treatment was carried out at 823K for 10.8ks under 665Pa in a 30% $N_2$-70% $H_2$ gas atmosphere. Plasma-sulfnitriding layers formed of the steel were characterized with EDX, XRD, micrographic structure observation and hardness measurement. A compound layer of 8-15$\mu\textrm{m}$ and nitrogen diffusion layer of about 400$\mu\textrm{m}$ were formed on the surface of plasma-sulfnitrided steel. The compound layer consisted of FeS containing Mo and iron nitrides. The nitrides of $\varepsilon$-$Fe_2_3N$ and $\gamma$'-$Fe_4N$ formed under the FeS. The thickness of compound layer and surface hardness were different with the gaps between main and subsidiary cathodes even in the same sulfnitriding temperature. The surface hardnesses after plasma-sulfnitriding were distributed from 640 to 830Hv. The surface hardness was higher in the plasma-sulfnitriding than the usual sulfnitriding in molten salt. This may be due to Mo in sulfnitriding layer.

• 한국지구과학회지
• /
• 제32권6호
• /
• pp.613-628
• /
• 2011

한반도에서 측정되고 있는 시계열 지자기 자료에 대해 결측 자료에 대한 복원과 측정 자료에 기반한 예측, 그리고 기관별 관측 자료에 대한 잡음도를 분석하였다. 결측 자료의 복원을 위해 주성분 분석을 통한 최적화 기법과 지구 통계학적 접근에 의한 방법을 적용하고 그 효과를 비교하였다. 주성분 기법은 자료의 주기성을 효율적으로 반영하는 특성을 보였으며, 지구통계학적 방법은 안정적인 복원 능력을 보였다. 관측소 별 잡음도를 파악하기 위해 이천 및 청양에서 동일 기간에 관측한 지자기 자료에 대해 공간적 분산성을 스캐터그램을 이용해 파악하였다. 그 결과 청양 관측소의 자료가 이천 관측소의 자료보다 연속적이며 안정적인 측정이 이루어진 것을 알 수 있었으며, 복원을 위한 크리깅 추정에서도 실제 자료의 추정이 매우 정확하게 이루어졌다. 결측자료의 복원의 경우 20분 이내의 결측 자료에 대해서는 크리깅 기법과 주성분 기법 모두 유사한 결과를 보였으나, 그 이상의 결측에 대한 복원과 지자기 자료의 예측이 필요한 경우에는 주성분 기법을 적용해야 주파수 영역에서의 특성이 실제와 더욱 유사하게 나타났다. 또한 지자기 자료의 예측을 위해서는 주성분 분석이 효율적으로 이용될 수 있음을 파악하였으며, 하루 정도의 지자기장을 예측할 수 있는 것으로 보인다.