• 대한물리의학회지
• /
• 제13권4호
• /
• pp.131-138
• /
• 2018

PURPOSE: This study was conducted to compare the muscle activity of the proximal muscles of the lower limb according to the distance between the front and rear foot during lunge and to determine the most effective foot position for activation of the proximal muscle in the limb. METHODS: A total of 49 young adults were enrolled in this study. All subjects performed lunge by positioning the big toe of the back foot and the heel of the front foot at intervals of 40%, 60%, and 80% of the subject's own leg length. Muscle activity of the vastus medialis oblique, rectus femoris (RF), vastus lateralis oblique (VLO), gluteus medius, biceps femoris, and semitendinosus (ST) was then measured during three intervals of lunge operation. Each operation was measured three times for 10 seconds each, after which the average value was calculated and analyzed. RESULTS: There were significant differences in muscle activities of RF, VLO, and ST among the three intervals of the foot (p<.05). Post hoc, comparisons revealed lunge at 40% intervals resulted in higher RF and VLO activity than at 60% and 80% intervals (p<.05). In the semitendinosus muscle, 80% leg length intervals showed higher muscle activity than 40% (p<.05). CONCLUSION: Strengthening of the proximal muscles of the lower extremities during lunge exercise is considered to be most effective when placing the fore- and rear foot at intervals corresponding to 40% of the leg length.

• 대한소아치과학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 1980

The author observed the eruption pattern of the mandibular premolars. For this study the author took 406 cases of oblique cephalographs of 6 to 12 year old children. The measurement were with regard to the vertical and horizontal dimensional changes and tooth axis changes to the occlusal plane. The following results were obtained. 1. At stage V the tooth axis of 1st premolar inclined mesially to the occlusal plane, as the tooth erupt toward vertically the angulation changed that at stage X the tooth axis almost right angle to the occlusal plane. 2. The distance from the root apex of premolars to the lower border of mandible were slightly increased to the stage VII, while after stage VII rapid increasing appeared. At stage X the distance of 1st premolar was more longer than 2nd premolar. 3. The distance from the mesial surface of 1st molar to the mesial surface of premolars were decreased slightly to the stage VII, but this distances were decreased rapidly after stage VII. 4. The distance between distal surface of 1st premolar and mesial surface of 2nd premolar was almost constant before stage VIII, at stage IX this distance was little presented because the premolars were contacted.

• 한국전문물리치료학회지
• /
• 제15권4호
• /
• pp.64-69
• /
• 2008

The purpose of this study was to compare the effectiveness of modified vertical roll sling and conventional Bobath roll sling in reducing hemiplegic shoulder subluxation. Radiography of $40^{\circ}$ anterior oblique radiographic view' were taken, before and immediately after wearing each sling in 13 hemiplegic patients. The vertical distance. horizontal distance. and joint distance were measured. Analysis of radiographically measured distances showed that both modified vertical roll sling and Bobath roll sling decreased vertical, horizontal. and joint distances. Reduction in vertical and joint distances were significantly greater in modified vertical roll sling compared to Bobath roll sling. while horizontal distance showed no significant difference between the two slings. Therefore it can be concluded that modified vertical roll sling is an effective orthosis in reducing hemiplegic shoulder subluxation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.271-274
• /
• 1998

Ultrasonic sensors are becoming indispensable components in every sector of automation equipments due to many advantages. But the main purposes of the noncontact sensing device are rather narrowly confined within object detection and distance measurement. To widen the realm of the applications to object recognition, ultrasonic sensors need to improve the recognition resolution to a certain amount. To resolve the problem of spatial resolution restriction, an increased number of the sensors in the forms of a linear array or 2-dimensional array of the sensor has been used. Also better resolution has been obtained by shifting the array in several steps using mechanical actuators. For an object recognition using ultrasonic sensors, measurements of distance, shift, oblique angle in certain ranges should be obtained. But a little attention has been paid to the measurement of angles. In this paper we propose a practical method for an object angular value detection in addition to distance measurement in ultrasonic sensor array system with little additional hardware burden. Using the established measurement look-up table for the variations of distance, shift, angle and transmitter voltages for each sensor characteristics, a set of different return echo signals for adjacent receivers are processed to provide enhanced angular value reading for an object.

• 한국멀티미디어학회논문지
• /
• 제11권6호
• /
• pp.787-795
• /
• 2008

Human recognition on camera is an interesting topic in computer vision. While fingerprint and face recognition have been become common, gait is considered as a new biometric feature for distance recognition. In this paper, we propose a gait recognition algorithm based on the knee angle, 2 feet distance, walking velocity and head direction of a person who appear in camera view on one gait cycle. The background subtraction method firstly use for binary moving object extraction and then base on it we continue detect the leg region, head region and get gait features (leg angle, leg swing amplitude). Another feature, walking speed, also can be detected after a gait cycle finished. And then, we compute the errors between calculated features and stored features for recognition. This method gives good results when we performed testing using indoor and outdoor landscape in both lateral, oblique view.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.295-302
• /
• 2013

상온에서의 2롤 교정공정은 인발선재의 진직도를 향상시키기 위한 가공방법이다. 인발과정에서 생긴 인발선재의 내부 및 외부에 남아 있는 잔류응력은 2롤 교정을 거치면서 변하게 된다. 그에 따라서 인발선재의 선경에도 변화가 생긴다. 인발후 잔류응력이 남아 있는 소재에 대하여 롤사이의 거리(h)와 롤의 교차각도(${\alpha}_u$, ${\alpha}_d$)에 따른 선경변화를 분석하고 최종제품의 잔류응력과 선경변화를 예측하였다. 2롤 교정을 통한 최종제품의 선경변화를 예측해 실험값과 비교 및 검증한 결과 타당한 계산결과를 얻을 수 있었다. 상부롤과 하부롤의 교차각도는 잔류응력과 선경변화에 미치는 영향이 미미하였다. 반면에, 롤사이의 거리(h)는 잔류응력과 선경변화에 영향을 미치는 것을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.71-86
• /
• 2020

This paper presents a study on the mechanical behavior of buried pipelines crossing faults using experimental and numerical methods. A self-made soil-box was used to simulate normal fault, strike-slip fault and oblique slip fault. The effects of some important parameters, including the displacement and type of fault, the buried depth and the diameter of pipe, on the deformation modes and axial strain distribution of the buried pipelines crossing faults was studied in the experiment. Furthermore, a finite element analysis (FEA) model of spring boundary was developed to investigate the performance of the buried pipelines crossing faults, and FEA results were compared with experimental results. It is found that the axial strain distribution of those buried pipelines crossing the normal fault and the oblique fault is asymmetrical along the fault plane and that of buried pipelines crossing the strike-slip fault is approximately symmetrical. Additionally, the axial peak strain appears near both sides of the fault and increases with increasing fault displacement. Moreover, the axial strain of the pipeline decreases with decreasing buried depth or increasing ratios of pipe diameter to pipe wall thickness. Compared with the normal fault and the strike-slip fault, the oblique fault is the most harmful to pipelines. Based on the accuracy of the model, the regression equations of the axial distance from the peak axial strain position of the pipeline to the fault under the effects of buried depth, pipe diameter, wall thickness and fault displacement were given.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1183-1192
• /
• 2001

The numerical simulation has been conducted for the investigation of flow and heat transfer characteristics of an oblique impingement jet injected to a flat plate. The finite volume method was used to discretize the governing equations based on the non-orthogonal coordinate with non-staggered variable arrangement. The $textsc{k}$-$\varepsilon$-ν(sup)'2 turbulence model was employed to consider the consider the anisotropic flow characteristics generated by the impingement jet flow. The predicted results were compared with the experimental data and those of the standard $textsc{k}$-$\varepsilon$ turbulence model. The results of the $textsc{k}$-$\varepsilon$-ν(sup)'2 model showed better agreement with the experimental data than those of the standard $textsc{k}$-$\varepsilon$ model. In order to get the optimum condition, the flow and temperature fields were calculated with a variation of inclined angle($\alpha$=30$^{\circ}$~90$^{\circ}$) and the distance between the jet exit and impingement plate-to-diameter (L/D=4~10) at a fixed Reynolds number(Re=20,000). For a small L/D, the near-peak Nusselt numbers were not significantly effected by the inclined angle. The near-peak Nusselt numbers were not significantly affected by the L/D in the case of a large $\alpha$. The overall shape of the local Nusselt numbers was influenced by both the jet orifice-to-plate spacing and the jet angle.

• 한국안광학회지
• /
• 제17권4호
• /
• pp.477-482
• /
• 2012

목적: 한국인과 필리핀인을 대상으로 비정시안의 굴절이상 상태를 알아보고자 하였다. 방법: 안경원을 방문하여 굴절검사를 받은 한국인 7,695명(15,390안)과 필리핀인 2,256명(4,512안)을 대상으로 굴절이상안의 분포, 난시안의 종류와 난시량의 크기, 근용안경가입도와 동공중심간거리 등을 두 나라 간 비교 분석하였다. 결과: 비정시안의 분포는 한국인은 근시 93.69%, 원시 6.31%, 필리핀인은 근시 73.43%, 원시 26.57%로, 근시안의 등가구면굴절력은 한국인 -Q3.352 D 필리핀인 -Q2.213 D로 한국인이 -Q1.139 D 크게 조사되었다. 원시안의 등가구면굴절력은 한국인 1.147D, 필리핀인 1.251 D로 필리핀인이 0.104 D 큰 것으로 조사되었다. 한국인의 비정시안의 분포는 중도근시 49.86%, 경도근시 32.28%, 고도근시 11.55%, 경도원시 5.54%, 중도원시 0.75% 이었고, 필리핀인은 경도근시 44.53%, 중도근시 25.11%, 고도근시3.79, 중도원시 23.03% 경도원시 3.51%로 조사되었다. 난시량은 한국인이 필리핀인 보다 0.175D 많았으며, 난시의 종류는 한국인은 직난시, 도난시, 사난시, 필리핀인은 직난시, 사난시, 도난시 순으로 많았고, 사난시 비율이 한국인보다 필리핀인이 높았다. 근용안경가입도 크기는 모든 연령에서 평균 0.296 D 정도 필리핀인이 높았으며, 동공중심간거리는 한국인이 필리핀인보다 남성 0.97 mm, 여성 0.63 mm 크게 조사되었다. 결론:한국인과 필리핀인의 굴절이상 분포는 근시안이 많았고 필리핀인은 한국인에 비해 원시안의 비율이 많았다. 한국인은 도난시 비율이, 필리핀인은 사난시 비율이 상대적으로 높았다. 근용가입도는 필리핀인이 한국인보다 높았으며, 동공중심간거리는 신체적 특성상 한국인이 필리핀인보다 컸다. 이는 지리적 환경이 눈의 굴절상태에 영향을 미친 것으로 사료된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.274-279
• /
• 2004

Currently, carbon-fiber reinforced plastics(CFRP) are widely used in both space and civil aircraft due to their superior stiffness and strength to weight ratios compared to conventional metallic materials. This paper is to study the effects of curvature and stacking sequence on the penetration characteristics of composite laminated shell. And were performed to investigate the penetration characteristics of composite laminated shells by the oblique impact. They are stacked to [0$_3$/90$_3$]s, [90$_3$/0$_3$]s and [0$_2$/90$_3$/0]s, [90$_2$/0$_3$/90]s their interlaminar number two and fore. They are manufactured to varied curvature radius (R=100, 150, 200mm and $\infty$). When the specimen is subjected to transverse impact by a steel ball, the velocity of the steel ball was measured both before and after impact by determining the time for it to pass two ballistics-screen sensor located a known distance apart. In general, the critical penetration energy interface decrease and slope angle on the impact surface increased. [0$_3$/90$_3$]s and [0$_2$/90$_3$]s specimens higher than [90$_3$/0$_3$]s and [90$_2$/0$_3$/90]s specimens.