• The Korean Journal of Pain
• /
• 제19권1호
• /
• pp.68-71
• /
• 2006

Background: Stellate ganglion block (SGB) is a selective sympathetic blockade that affects the head, neck and the upper extremities. It is an important method that has been frequently used in pain clinics due to its wide range of indications. But there were some problem with performing SGB at C6 or C7. Thus, various techniques have been recently introduced to successfully perform SGB; among them, there is the oblique approach. This study was performed to evaluate the effectiveness of the oblique approach for performing SGB in C7. Methods: Forty six patients with sudden hearing loss were studied. In group I, the patient underwent C7 oblique SGB with 1% mepivacaine (3 ml) under fluoroscopic guidance. In group II, the patients underwent the C7 classical anterior approach SGB with 1% mepivaine (5 ml) under fluoroscopic guidance. We compared the occurrence of Horner's syndrome, the side effects and the changes of temperature of the skin of the hand. Results: The rate of Horner's syndrome was 81.5% in the group I and 84.2% in the group II. The rate of incurring increased skin temperature (${\geq}34^{\circ}C$) of the fingers was 77.7% and 79.4% in each group, respectively. Conclusions: The C7 oblique approach for SGB showed the same SGB effect compared with the C7 anterior approach for SGB, and there were also fewer complications. We conclude that C7 oblique SGB may be a beneficial method for treating patients with this particular malady.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1789-1794
• /
• 2003

As a new approach to analyze shear behaviors in the shear plane and chip-tool friction behaviors in the chip-tool contact region during an end milling process, this paper introduces a method to transform an end milling process to an equivalent oblique cutting process. In this approach, varying undeformed chip thicknesses and cutting forces in the up-and down-end milling process are replaced with the equivalent ones of oblique cutting. Accordingly, in the current paper, the shear and friction characteristics of end milling operations, up- and down-end milling, have been analyzed based on the equivalent oblique cutting models. Two series of cutting tests, up- and down-end milling tests and the equivalent oblique cutting tests to that, have been carried out to verify the validity of the analyses. And using the results of cutting tests the cutting characteristics of the up- and down-end milling processes have been thoroughly investigated.

• The Korean Journal of Pain
• /
• 제10권1호
• /
• pp.93-96
• /
• 1997

Block of superior hypogastric plexus has been advocated as a useful technique in the palliation of various of pelvic pain syndromes. This technique has been performed under fluroscopic or CT guidance using bilateral placement of needles. We performed a modification of transdiscal approach with the patient in oblique position permitting successful superior hypogastric plexus block using a single needle placed under fluoroscopic guidance. Our experience suggest transdiscal approach performed in oblique position allows easier, safer, and more accurate needle placement for superior hypogastric plexus block.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2004년도 추계학술발표대회 논문집
• /
• pp.240-246
• /
• 2004

For the prediction on the onset of oblique shock wave-induced vortex breakdown, computational studies on the Oblique Shock wave/Vortex Interaction (OSVI) are conducted and compared with both experimental results and analytic model. A Shock-stable numerical scheme, the Roe scheme with Mach number-based function (RoeM), and a two-equation eddy viscosity-transport approach are used for three-dimensional turbulent flow computations. The computational configuration is identical to available experiment, and we attempt to ascertain the effect of parameters such as a vertex strength, streamwise velocity deficit, and shock strength at a freestream Mach number of 2.49. Numerical simulations using the ${\kappa}-{\omega}SST$ turbulence model and suitably modeled vortex profiles are able to accurately reproduce many fine features through a direct comparison with experimental observations. The present computational approach to determine the criterion on the onset of oblique shock wave-induced vortex breakdown is found to be in good agreement with both the experimental result and the analytic prediction.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.56-69
• /
• 2015

This paper presents a numerical study on investigating on hydrodynamic characteristics of a marine propeller in oblique flow. The study is achieved by RANS simulations on an open source platform - OpenFOAM. A sliding grid approach is applied to compute the rotating motion of the propeller. Total force and moment acting on blades, as well as average force distributions in one revolution on propeller disk, are obtained for 70 cases of combinations of advance ratios and oblique angles. The computed results are compared with available experimental data and discussed.

• 고신대학교 의과대학 학술지
• /
• 제33권2호
• /
• pp.208-214
• /
• 2018

Although the inferior oblique (IO) muscle is positioned considerably deep in the orbit, transconjunctival lower lid blepharoplasty may affect it and transient or permanent IO muscle palsy might result. Therefore diplopia should be explained before cosmetic blepharoplasty performed with transconjunctival approach.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.223-228
• /
• 2003

In end milling processes, characterized by use of rotating tools, the underformed chip thickness varies periodically with the phase change of tool. In current study, as a new approach to analyse shear behaviors In the shear plane and chip-tool friction behavior chip-tool contact region during an end milling process. In this approach, an up-end milling process is transformed into an equivalent oblique cutting process. Experimental investigations for two sets of cutting tests i.e.. up-end milling and the equivalent oblique cutting test were performed to verify the presented model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.928-933
• /
• 2004

A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.20-28
• /
• 2004

경사충격파와 와류간의 상호작용에 관한 수치적 해석은 경사충격파에 기인한 와류붕괴 의 발생에 관한 이론적 모델 및 실험치와 비교하기 위해 수행되었다. 본 연구의 해석을 위해 마하수에 기초한 Roe의 기법 (RoeM) 과 2-방정식 난류 모델을 이용하여 3차원 난류 유동장을 효과적으로 계산하였다. 자유류 마하수 2.49에서 와유세기, 축방향속도 성분, 충격파 세기의 변화에 따른 상호작용의 영향을 연구하였다. 2-방정식 난류모델인 k-wSST 난류모델과 적절히 모델링된 와류모델을 이용하여 수치연구를 수행함으로써 실험적으로 관찰된 여러 유동장을 정확히 모사할 수 있었다. 경사충격파에 기인한 와류붕괴의 발생에 관한 기준을 결정하기 위한 본 연구결과는 이론적 모델과 실험치와 일치된 결과를 보여주고 있음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제91권5호
• /
• pp.503-516
• /
• 2024

The present research examines the primary resonance (PR) behaviors of oblique stiffened multilayer functionally graded (OSMFG) shallow shells featuring an FG porous (FGP) core under an external excitation. The research considers two distinct types of FGP cores: one characterized by uniform porosity distribution (UPD) and the other by non-uniform porosity distribution (NPD) along the thickness direction. Furthermore, the study explores two types of shallow shells: one with external oblique stiffeners and one with internal oblique stiffeners, which might have angles that are similar or different from each other. Using the stress function alongside the first-order shear deformation theory (FSDT), the research establishes a nonlinear model for OSMFG shallow shells. The strain-displacement relationships are obtained utilizing FSDT and von-Kármán's geometric assumptions. The Galerkin approach is utilized to discretize the nonlinear governing equations, allowing for the analysis of stiffeners at varied angles. To validate the obtained results, a comparison is made not only with the findings of previous research but also with the response of PR obtained theoretically with the method of multiple scales, using the P-T method. Renowned for its superior accuracy and reliability, the P-T method is deemed an apt selection within this framework. Additionally, the study investigates how differences in material characteristics and stiffener angles affect the system's PR behaviors. The results of this study can be used as standards by engineers and researchers working in this area, and they can offer important information for the design and evaluation of the shell systems under consideration.