• The Korean Journal of Pain
• /
• v.19 no.1
• /
• pp.68-71
• /
• 2006

Background: Stellate ganglion block (SGB) is a selective sympathetic blockade that affects the head, neck and the upper extremities. It is an important method that has been frequently used in pain clinics due to its wide range of indications. But there were some problem with performing SGB at C6 or C7. Thus, various techniques have been recently introduced to successfully perform SGB; among them, there is the oblique approach. This study was performed to evaluate the effectiveness of the oblique approach for performing SGB in C7. Methods: Forty six patients with sudden hearing loss were studied. In group I, the patient underwent C7 oblique SGB with 1% mepivacaine (3 ml) under fluoroscopic guidance. In group II, the patients underwent the C7 classical anterior approach SGB with 1% mepivaine (5 ml) under fluoroscopic guidance. We compared the occurrence of Horner's syndrome, the side effects and the changes of temperature of the skin of the hand. Results: The rate of Horner's syndrome was 81.5% in the group I and 84.2% in the group II. The rate of incurring increased skin temperature (${\geq}34^{\circ}C$) of the fingers was 77.7% and 79.4% in each group, respectively. Conclusions: The C7 oblique approach for SGB showed the same SGB effect compared with the C7 anterior approach for SGB, and there were also fewer complications. We conclude that C7 oblique SGB may be a beneficial method for treating patients with this particular malady.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1789-1794
• /
• 2003

As a new approach to analyze shear behaviors in the shear plane and chip-tool friction behaviors in the chip-tool contact region during an end milling process, this paper introduces a method to transform an end milling process to an equivalent oblique cutting process. In this approach, varying undeformed chip thicknesses and cutting forces in the up-and down-end milling process are replaced with the equivalent ones of oblique cutting. Accordingly, in the current paper, the shear and friction characteristics of end milling operations, up- and down-end milling, have been analyzed based on the equivalent oblique cutting models. Two series of cutting tests, up- and down-end milling tests and the equivalent oblique cutting tests to that, have been carried out to verify the validity of the analyses. And using the results of cutting tests the cutting characteristics of the up- and down-end milling processes have been thoroughly investigated.

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.93-96
• /
• 1997

Block of superior hypogastric plexus has been advocated as a useful technique in the palliation of various of pelvic pain syndromes. This technique has been performed under fluroscopic or CT guidance using bilateral placement of needles. We performed a modification of transdiscal approach with the patient in oblique position permitting successful superior hypogastric plexus block using a single needle placed under fluoroscopic guidance. Our experience suggest transdiscal approach performed in oblique position allows easier, safer, and more accurate needle placement for superior hypogastric plexus block.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.240-246
• /
• 2004

For the prediction on the onset of oblique shock wave-induced vortex breakdown, computational studies on the Oblique Shock wave/Vortex Interaction (OSVI) are conducted and compared with both experimental results and analytic model. A Shock-stable numerical scheme, the Roe scheme with Mach number-based function (RoeM), and a two-equation eddy viscosity-transport approach are used for three-dimensional turbulent flow computations. The computational configuration is identical to available experiment, and we attempt to ascertain the effect of parameters such as a vertex strength, streamwise velocity deficit, and shock strength at a freestream Mach number of 2.49. Numerical simulations using the ${\kappa}-{\omega}SST$ turbulence model and suitably modeled vortex profiles are able to accurately reproduce many fine features through a direct comparison with experimental observations. The present computational approach to determine the criterion on the onset of oblique shock wave-induced vortex breakdown is found to be in good agreement with both the experimental result and the analytic prediction.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.56-69
• /
• 2015

This paper presents a numerical study on investigating on hydrodynamic characteristics of a marine propeller in oblique flow. The study is achieved by RANS simulations on an open source platform - OpenFOAM. A sliding grid approach is applied to compute the rotating motion of the propeller. Total force and moment acting on blades, as well as average force distributions in one revolution on propeller disk, are obtained for 70 cases of combinations of advance ratios and oblique angles. The computed results are compared with available experimental data and discussed.

• Kosin Medical Journal
• /
• v.33 no.2
• /
• pp.208-214
• /
• 2018

Although the inferior oblique (IO) muscle is positioned considerably deep in the orbit, transconjunctival lower lid blepharoplasty may affect it and transient or permanent IO muscle palsy might result. Therefore diplopia should be explained before cosmetic blepharoplasty performed with transconjunctival approach.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.223-228
• /
• 2003

In end milling processes, characterized by use of rotating tools, the underformed chip thickness varies periodically with the phase change of tool. In current study, as a new approach to analyse shear behaviors In the shear plane and chip-tool friction behavior chip-tool contact region during an end milling process. In this approach, an up-end milling process is transformed into an equivalent oblique cutting process. Experimental investigations for two sets of cutting tests i.e.. up-end milling and the equivalent oblique cutting test were performed to verify the presented model.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.928-933
• /
• 2004

A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.20-28
• /
• 2004

For the prediction on the onset of oblique shock wave-induced vortex breakdown, computational studies on the Oblique Shock wave/Vortex Interaction (OSVI) are conducted and compared with both experimental results and analytic mode1. A Shock-stable numerical scheme, the Roe scheme with Mach number-based function (RoeM), and a two-equation eddy viscosity-transport approach arc used for three-dimensional turbulent flow computations. The computational configuration is identical to available experiment, and we attempt to ascertain the effect of parameters such as a vortex strength, streamwise velocity deficit, and shock strength at a freestream Mach number of 2.49. Numerical simulations using the k-w SST turbulence model and suitably modeled vortex profiles are able to accurately reproduce many fine features through a direct comparison with experimental observations. The present computational approach to determine the criterion on the onset of oblique shock wave-induced vortex breakdown is found to be in good agreement with both the experimental result and the analytic prediction.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.709-727
• /
• 2015

The main aim of this study is to introduce optimal design of homogeneous earth dams with oblique and horizontal drains based on particle swarm optimization (PSO) incorporating weighted least squares support vector machine (WLS-SVM). To achieve this purpose, the upstream and downstream slopes of earth dam, the length of oblique and horizontal drains and angle among the drains are considered as the design variables in the optimization problem of homogeneous earth dams. Furthermore, the seepage through dam body and the weight of dam as objective functions are minimized in the optimization process simultaneously. In the optimization procedure, the stability coefficient of the upstream and downstream slopes and the seepage through dam body as the hydraulic responses of homogeneous earth dam are required. Hence, the hydraulic responses are predicted using WLS-SVM approach. The optimal results of illustrative examples demonstrate the efficiency and computational advantages of PSO with WLS-SVM in the optimal design of homogeneous earth dams with drains.