• 한국해양공학회지
• /
• 제26권2호
• /
• pp.68-78
• /
• 2012

This study proposes an improved 3-D model that includes a new non-reflected wave generation system for oblique incident and multi-directional random waves, which enables us to estimate the effect of the various wave-types on 3-D wave fields in a coastal area with permeable submerged breakwaters. Then, using the numerical results,the three-dimensional wave field characteristics around permeable submerged breakwaters are examined in cases of oblique incident and multi-directional random waves. Especially, the wave height, mean surface elevation and mean flow around the submerged breakwaters are discussed in relation to the variation of incident wave condition.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.63-68
• /
• 2005

본 논문에서는 수중운동체의 운동수학모형 정립 및 최적제어 방안 연구를 위해, 수중운동체의 6자유도 운동 방정식을 유도하고, UUV 모형의 사항시험을 통해 6방향의 유체력을 구하였다.

• 한국임상수의학회지
• /
• 제37권4호
• /
• pp.217-222
• /
• 2020

A 3-year-old male Thoroughbred serving as a Korean racehorse named RAON PORTEOUS presented with acute lameness concomitant with edema and fever in the right carpal joint after completing a horse race. Through radiological examination using lateromedial oblique, flexed lateromedial oblique and dorsopromixal-dorsodistal oblique views, the horse was diagnosed with a slab fracture in the 3^rd carpal bone of right forelimb. The fracture was surgically approached and corrected by applying 4.5 mm leg screw fixation during surgery. At eight months post-surgery, the horse was able to return to racing and has had successful racing performances with two wins and several prizes in the last 8 months. This is the first reported case of the successful use of lag screw fixation surgery in Korea with the horse showing complete recovery from a severe injury that is often considered fatal in a racehorse.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.429-435
• /
• 1998

Experiments were conducted to investigate the turbulent flow characteristics from on oblique impingement surface to an plane jet at the jet Reynolds number(Re based on the nozzle width) $3{\times}10^4$ The jet mean velocity and turbulent intensity profiles have been measured along the impingement surface by hot-wire anemometer. The nozzle-to-plate distance(H/B) ranged from 2 to 10 and the oblique angle (a) from 45 to 90 degree. Also the secondary peak of the turbulent intensity was observed at H/B=4 S/B 5 and a=90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreased and the position of the stagnation point nearly coincided with that of the maximum turbulent intensity.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.482-494
• /
• 2019

In this paper, the oblique water-entry impact of a vehicle with a disk cavitator is studied experimentally and numerically. The effectiveness and accuracy of the numerical simulation are verified quantitatively by the experiments in this paper and the data available in the literature. Then, the numerical model is used to simulate the hydrodynamic characteristics and flow patterns of the vehicle under different entry conditions, and the axial force is found to be an important parameter. The influences of entry angle, entry speed and cavitator area on the axial force are studied. The variation law of the force coefficient and the dimensionless penetration distance at the peak of the axial force are revealed. The research conclusions are beneficial to engineering calculations on the impact force of a vehicle with a disk cavitator over a wide range of water-entry parameters.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.77-82
• /
• 2021

This numerical study focuses on the analysis of fume particle dispersion characteristics over the surface of target workpiece in laser micro-hole machining process. The effects of oblique stagnation flow over fume generating machining point are examined by carrying out a series of three-dimensional random particle simulations along with probabilistic particle generation model and particle drag correlation of low Reynolds number. Present computational model of fume particle dispersion is found to be capable of assessing and quantifying the fume particle contamination in precision hole machining which may influenced by different types of air flow patterns and their flow intensity. The particle size dependence on dispersion distance of fume particles from laser machining point is significant and the effects of increasing flow oblique angle are shown quite differently when slot blowing or slot suction flows are applied in micro-hole machining.

• 대한방사선치료학회지
• /
• 제25권2호
• /
• pp.123-129
• /
• 2013

목 적: 전립선암 환자의 정확한 방사선치료를 위해 사전에 fiducial marker를 삽입하고 매 치료 전에 전립선의 위치를 확인 하는 방법이 있다. OBI (On-Board Imager)를 이용하여 대퇴부와 골반부에 가려져 잘 보이지 않았던 fiducial marker를 보다 명확히 확인할 수 있는 KV X-ray Both oblique (양사방향)촬영을 시행하고 기존의 2D/2D match (AP/LAT)촬영방법과 비교해서 그 유용성을 평가해 보고자 한다. 대상 및 방법: 2012년 9월부터 2013년 4월까지 본과의 전립선암 환자 중 fiducial marker를 삽입하고 직장 ballooning을 시행한 환자 5명을 대상으로 치료 전 기존의 위치잡이 방법인 2D/2D match (AP/LAT) 즉 $0^{\circ}$ 및 $270^{\circ}$ 각도의 DRR (digital reconstruction radiography) 영상을 구성하고, 치료실에서는 환자 셋업 후 On-Board Imager로 얻어낸 $0^{\circ}$ 및 $270^{\circ}$ 방향의 KV X-ray Live 영상과 융합시켜 marker matching을 하고 X, Y, Z축에 대한 보정 값을 산출하였다. 또한 이와 비교 평가하는 양사방향 촬영에 적합한 각도를 결정하기 위하여 OBI source 각도 $10^{\circ}$ 간격으로 $0{\sim}360^{\circ}$ 방향의 DRR (digital reconstruction radiography) 영상을 구성한 후 그 중에서 fiducial maker가 가장 명확히 보이는 정 양사방향 $45^{\circ}$ 및 $315^{\circ}$ 방향의 영상을 선택하여 X, Y, Z축에 대한 보정 값을 산출하였으며, 기존의 AP/LAT ($0^{\circ}$ 및 $270^{\circ}$) matching 방법 비교평가 하기 위해 새롭게 구성한 양사방향($45^{\circ}$ 및 $315^{\circ}$) matching 방법을 격일로 병행하면서 fiducial maker matching을 실시하였다. 각 방법별 발생된 오차 이동 값에 대해서는 matching 후 보정하여 치료에 적용하였다. 결 과: OBI KV X-ray 영상을 이용한 2D/2D match는 직교하는 두 개의 영상이 필요하므로 직교가 되면서 fiducial marker의 위치파악이 명확하고, matching이 가장 유용한 DRR (digital reconstruction radiography) 영상은 OBI source 각도 $45^{\circ}$ 및 $315^{\circ}$ 방향에서 marker matching이 가장 유용하였으며, 각각의 matching 방법에 따라 환자를 셋업 하고 각 환자별로 치료 분할 수에 따른 각각의 X, Y, Z축의 오차 이동 값 $Mean{\pm}SD$를 산출한 결과, X축에서 AP/LAT: $0.4{\pm}1.67$ mm, OBLIQUE: $0.4{\pm}1.82$ mm, Y축에서 AP/LAT: $0.7{\pm}1.73$ mm, OBLIQUE: $0.2{\pm}1.77$ mm, Z축에서 AP/LAT: $0.8{\pm}1.94$ mm, OBLIQUE: $1.5{\pm}2.8$ mm로 나타났다. 즉 기존의 AP/LAT방향과 양사방향 촬영의 비교결과 오차 이동 값은 Z축 방향으로 다소 높게 나타났다. 이러한 오차 이동 값은 대상 환자의 적절한 전 처치 시행 여부와 치료 시 필연적으로 발생하는 셋업오차라 사료되며 각 환자별로 오차 값을 보정해서 치료에 적용하였다. 결 론: 전립선암 환자의 치료 전 자세 위치잡이 단계 시 OBI source angle $45^{\circ}/315^{\circ}$ 양사방향 촬영은 기존의 OBI source 각도 $0^{\circ}/270^{\circ}$ 방향의 AP/LAT 촬영보다 명확하게 fiducial marker를 확인 할 수 있으므로 보다 정확한 fiducial matching이 가능하였다. 또한 명확한 marker의 위치확인으로 matching에 소요되는 시간도 단축시킬 수 있었다. 그리고 기존의 방법 보다 적은 피폭선량으로 촬영이 가능 하였다. 따라서 전립선암 환자 뿐 만 아니라 양사방향 위치잡이 방법을 이용 할 수 있는 다른 치료부위에 대해서도 프로토콜을 마련하여 적용하면 정확한 치료에 필수적인 위치잡이 방법의 질을 향상 시키는데 기여 할 수 있으리라고 사료된다.

• 한국전문물리치료학회지
• /
• 제11권4호
• /
• pp.19-29
• /
• 2004

Many muscles of the trunk and hip are capable of contributing to the stabilization and protection of the lumbar spine. To have optimal effectiveness, a training program should include dynamic back/stomach/hip exercises. This study was designed to assess the L5 level paraspinal, external abdominal oblique, and gluteus maximus muscle activities during various low back stabilization exercises. Participants were 26 healthy adults (13 males, 13 Females), aged 21 to 28 years. The surface electromyography (EMG) was recorded from the L5 level paraspinal, external abdominal oblique, and gluteus maximus muscles. The recorded signal was averaged and normalized to the maximal electromyographic amplitude obtained during the maximal voluntary contraction. The measurements were taken during 3 low back stabilization exercises. One-way analysis of variance with repeated measures was used to examine the difference, and a post hoc test was performed with least significant difference. A level of significance was set at p<.05. The significance of difference between men and women, and between the electromyographic recording sites was evaluated by an independent t-test. The EMG activity for the externus oblique and gluteus maximus muscles had significant differences among 3 exercises (p<.05). In males, the EMG activity for the external abdominal oblique muscle had significantly increased differences during exercises 1 and exercise 2 (p<.05). The gluteus maximus muscle had significantly increased differences during exercise 2 and exercise 3 (p<.05). In females, the multifidus muscle had significantly increased difference during exercise 3 (p<.05), the external abdominal oblique muscle had significantly increased difference during exercise 1 (p<.05). and the gluteus maximus muscle had significantly decreased difference during exercise 3 (p<.05). The results were that the external abdominal oblique muscle was apparently activated during the curl-up exercise in females and males, and the multifidus muscle was apparently activated during the bridging exercise in females and during the sling exercise in males and females.1)In comparison of the %MVC between males and females, exercise 2 and exercise 3 apparently activated of the multifidus and gluteus maximus muscles in both males and females (p<.05). The EMG activity of the gluteus maximus muscle of the males significantly increased during exercise 2 and exercise 3 (p<.05). The EMG activity the multifidus muscle of the females was significantly increased during exercise 2 and exercise 3 (p<.05). More research is needed to understand the nature of motor control problems in the deep muscles in patients with low back pain.

• Journal of Periodontal and Implant Science
• /
• 제47권4호
• /
• pp.251-262
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of implant tilting and the loading direction on the displacement and micromotion (relative displacement between the implant and bone) of immediately loaded implants by in vitro experiments and finite element analysis (FEA). Methods: Six artificial bone blocks were prepared. Six screw-type implants with a length of 10 mm and diameter of 4.3 mm were placed, with 3 positioned axially and 3 tilted. The tilted implants were $30^{\circ}$ distally inclined to the axial implants. Vertical and mesiodistal oblique ($45^{\circ}$ angle) loads of 200 N were applied to the top of the abutment, and the abutment displacement was recorded. Nonlinear finite element models simulating the in vitro experiment were constructed, and the abutment displacement and micromotion were calculated. The data on the abutment displacement from in vitro experiments and FEA were compared, and the validity of the finite element model was evaluated. Results: The abutment displacement was greater under oblique loading than under axial loading and greater for the tilted implants than for the axial implants. The in vitro and FEA results showed satisfactory consistency. The maximum micromotion was 2.8- to 4.1-fold higher under oblique loading than under vertical loading. The maximum micromotion values in the axial and tilted implants were very close under vertical loading. However, in the tilted implant model, the maximum micromotion was 38.7% less than in the axial implant model under oblique loading. The relationship between abutment displacement and micromotion varied according to the loading direction (vertical or oblique) as well as the implant insertion angle (axial or tilted). Conclusions: Tilted implants may have a lower maximum extent of micromotion than axial implants under mesiodistal oblique loading. The maximum micromotion values were strongly influenced by the loading direction. The maximum micromotion values did not reflect the abutment displacement values.

• Investigative Magnetic Resonance Imaging
• /
• 제18권2호
• /
• pp.157-166
• /
• 2014

목적 : 고식적 견관절 MRI 검사에 사각시상면 영상 추가 시 극상건 파열의 진단적 정확도가 증가하는지 관절경 수술 소견을 대비표준으로 삼아 알아보고자 하였다. 대상 및 방법 : 2011년 1월부터 2012년 12월까지 본원에서 견관절 MRI 검사를 하고 관절경 수술을 받은 121명의 환자를 대상으로 하였다. 두 명의 영상의학과 의사가 독립적으로 관상사면과 시상사면 영상을 이용하여 극상건 파열을 평가하고 4주후 사각시상면 영상을 추가하여 다시 판독하였다. 관절경 수술을 대비표준으로 이용하였다. 건 파열 진단의 민감도와 특이도는 McNemar test로 비교하였고 관찰자 간, 기술 간 일치도는 카파계수로 평가하였다. 결과 : 사각시상면 추가 시 고식적 견관절 MRI만 이용하였을 때 보다 극상건 전층 파열 진단의 민감도가 증가하였고, 부분 파열 진단의 민감도, 특이도, 정확도 모두 증가하였지만 통계학적으로 유의한 차이는 없었다. 관찰자간 일치도는 사각시상면을 추가하거나 하지 않았을 때 모두 높은 일치도를 보였다. 영상 소견과 관절경 수술 소견은 사각시상면 추가 시와 추가하지 않았을 때 모두 중등도의 일치도를 보였다. 결론 : 극상건의 전층 및 부분 파열 평가를 위해 고식적 MRI에 사각시상면 영상을 추가 시 기존의 영상면 만으로 평가하였을 때와 진단적 정확도에 의미 있는 차이는 없었다.