• Journal of Microbiology
• /
• v.45 no.6
• /
• pp.492-498
• /
• 2007

GacS and GacA proteins form a two component signal transduction system in bacteria. Here, Tn5 transposon gacS and gacA (Gac) mutants of Pseudomonas sp. KL28, an alkylphenol degrader, were isolated by selecting for smooth colonies of strain KL28. The mutants exhibited reduced ability to migrate on a solid surface. This surface motility does not require the action of flagella unlike the well-studied swarming motility of other Pseudomonas sp. The Gac mutants also showed reduced levels of biofilm and pellicle formation in liquid culture. In addition, compared to the wild type KL28 strain, these mutants were more resistant to high concentrations of m-cresol but were more sensitive to $H_2O_2$, which are characteristics that they share with an rpoS mutant. These results indicate that the Gac regulatory cascade in strain KL28 positively controls wrinkling morphology, biofilm formation, surface translocation and $H_2O_2$ resistance, which are important traits for its capacity to survive in particular niches.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.54-62
• /
• 1998

20 bacterial strains capable of growing on phenol minimal medium were isolated from soil and wastewater by the enrichment culture technique, and among them, one isolate which was the best in the cell growth was selected and identified as Bacillus sp. SH3 by its characteristics. Strain SH3 could grow with phenol as the sole carbon source up to 15 mM, but did not grow in minimal medium containing above 20 mM of phenol. The optimal conditions of temperature and initial pH for growth and phenol degradation were 30$^{\circ}$C and 7.5, respectively. This strain could grow on various aromatic compounds such as catechol, protocatechuic acid, gentisic acid, o-, m-, p-cresol, benzoic acid, p-hydroxybenzoic acid, anthranilic acid, phenyl acetate and pentachlorophenol, and the growth-limiting log P value of strain SH3 on organic solvents was 3.1. In batch culture, strain SH3 degraded 97% of 10 mM phenol in 48 hours. In continuous culture under the conditions of 20 mM of influent phenol concentration and 0.050 hr$^{-1}$ of dilution rate, the treatment rate of phenol was 94%.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.14-18
• /
• 2005

Under irradiation in a microwave oven, six novel poly(amide-imide)s containing tetrahydropyrimidinone, tetrahydro-2-thioxopyrimidine moieties and trimellitic rings in their main chains were synthesized through the polycondensation reaction of N,N'-(4,4'-diphenylether)bis(trimellitimide) diacid chloride with six different derivatives of tetrahydropyrimidinone and tetrahydro-2-thioxopyrimidine in the presence of a small amount of a polar organic medium, such as o-cresol. The polycondensation proceeded rapidly and completed within 7-9 min, producing a series of new poly(amide-imide)s in high yield that showed inherent viscosities in the range 0.33-0.52 dL/g. These poly(amide-imide)s were characterized by elemental analysis, viscosity measurement, thermal gravimetric analysis, solubility test, and FT-IR spectroscopy. All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.568-572
• /
• 1989

Terphenyl dialdehyde 6 was obtained in 17.4% overall yield through oxidative coupling, methylation, and bisformylation reactions starting from p-cresol, and then coupled intermolecularly using McMurry reaction to give 22-membered macrocylic host 7 in 14.4% yield. In crystal structure host 7 has $C2_v$ symmetry with cis-cis configuration of two double bonds. Four methoxy groups adjacent to double bonds and the other two methoxy groups are directed opposite side, forming a cavity which can nest a guest. The cavity is filled by two inward-turned methyl groups out of four methoxy groups adjacent to double bonds. The kinetically controlled reaction mechanism leading to cis product was proposed. The cation binding properties of 7 were obtained using picrate extraction experiment from $D_2O\; into\; CDCl_3\; at\; 25^{\circ}C$. All the spherical cations (from $Li^+ to NH4^+)$ are complexed with free energies of $7.3{\pm}0.3$ kcal/mol.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.257-263
• /
• 1999

Ln-macrocyclic([20]DOTA) complexes, [Ln([20]DPTA)(NO_{3})(H_{2}O)](NO_{3})_{2} \cdotxH_{2}O{Ln(III)=Pr, Sm, Gd, Dy}, which had been synthesized from 2, 6-diformyl-p-cresol(DFPC), was placed in methanol for 2 days, and $[Ln([20]DPTA)(NO_{3})(CH_{3}OH)]^{2+}$ was formed. The equilibrium constants(L) for the substitution of coordinated $CH_{3}OH$ in the Ln-[20]DOTA complexes by various auxiliary ligands, $L_{a}(=monodentate ligands; pyridine, imidazole, triethylamine, diethylamine, piperidine) were determined spectroscopically at $25^{\circ}C$ and 0.1M. The pKa of auxiliary ligand is in the order of pyridine < imidazole < triethylamine < diethylamine < piperidine, however the K has shown the trend of pyridine < imidzole < diethylamine < piperidine < triethylamine.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.364-372
• /
• 1996

The sorption and desorption properties of U(VI), Th(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zn(II), Cd(II) and Mn(II) ions on XAD-16-[2-(2-thiazolylazo)-p-cresol](TAC) chelating resin were studied by elution method for selective separation, concentration and recovery of trace metal ions in sea water. The optimum conditions for the sorption of metal ions were examined with respect to flow rate, pH and concentration of buffer solution. The overall capacities of some metal ions on this chelating resin were 0.41mmol U(VI)/g resin, 0.55mmol Th(IV)/g resin, 0.43mmol Cu(II)/g resin, and 0.32mmol Zr(IV)/g resin, respectively. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 5.0 was found as Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Cd(II)>Mn(II). Desorption of characteristics for metal ions were investigated with desorption agents such as $HNO_3$, HCl, $HClO_4$, $H_2SO_4$, and $Na_2CO_3$. It was found that most of metal ions except Zr(IV) showed high desorption efficiency with 2M $HNO_3$. But, desorption and recovery of Zr(IV) ion were successfully performed with 1M $H_2SO_4$. The resin was applied for separation and preconcentration of trace amount of U(VI) ion from artificial sea water and the recovery of U(IV) was over 96%.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.229-237
• /
• 2001

In order to identify of volatile flavor compounds and polycyclic aromatic hydrocarbons (PAHs) in commercial liquid smokes, this study was conducted to analyze volatile flavor compounds by solvent extraction and/or Purge & Trap method/GC/MSD. A total of 156 volatile flavor compounds were detected in 6 commercial liquid smokes, and these compounds were composed mainly of 12 aldehydes, 60 ketones, 7 alcohols, 14 acids, 20 esters, 24 aromatic compounds, 7 furans and 12 miscellaneous compounds. Ketones $(806.6-7,573.9\mu g/mL)$ and aromatic compounds $(282.6-7,896.3 \mu g/mL)$ were more abundant than others. The PAHs known as carcinogen have not been detected in this study. The acids $(422.9-4,903.1\mu g/mL)$ was identified in relatively high concentration compared to other groups. Phenol and its derivatives among aromatic compounds were in relatively high concentration. Especially, the phenol and its derivatives including o-cresol, guaiacol, 4-ethylguaiacol and syringol were in higher concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1997

Kraft oak lignin and ricestraw lignin from acetosolve pulping were dissolved in 50/50 mixture of tetralin/m-cresol solvent. The dissolved lignin was reacted in the pressurized autoclave which was operating at $350{\sim}500^{\circ}C$ of reaction temperature and 10~20 atms of reaction pressure respectively_Hydrogen pressure of 60~80kg/$cm^2$ was exercising into the pressurized autoclave reactor to create thermochemical hydrogenolysis reaction. It was identified by GLC, GC-MS and HPLC that the alkyl-aryl-${\beta}$-O-4 ether bond of lignin was cleaved and degraded into various smaller molecules of aromatic compound such as phenols and cresols under the reaction conditions around $300^{\circ}C$ and 10 atms of reaction temoerature and pressure. Hydrogenolysis reaction of lignin compound which was done above $500^{\circ}C$ of reaction temperature and 20 atms of reaction pressure showed that the amount of aromatic compound such as phenols and cresols degraded from reactant lignin was decreasing with newly present and increasing water out of product mixtures. It was supposed that new aliphatic compound of high molecular weight hydrocarbon is composed due to higher reaction temperature and pressure of hydrogenolysis reaction such as $500^{\circ}C$ and 20 atms, even though it was almost impossible, to identify what kind of degraded products it was by HPLC.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.81-86
• /
• 1996

The physical properties of epoxy molding compound (EMC) according to the change of softening point of epoxy resin have been investigated in order to study the relationship between the properties of o-cresol novolac epoxy resin, which is main component of EMC for semiconductor encapsulation, and EMC. The softening points of used epoxy resin are 65.1 $^{\circ}C$, 72.2 $^{\circ}C$, and 83.0 $^{\circ}C$, respectively. The flexural strength and flexural modulus as mechanical properties were measured, and thermal expansion coefficient, thermal conductivity and glass transition temperature (Tg) as thermal properties, and spiral flow as moldability have been investigated to see the change of physical properties of EMC. The flexural modulus, thermal expansion coefficients in the glass state (${\alpha}_1$), and thermal conductivity of EMC were found to be keep constant value irrespective of the change of softening point, but Tg increased with softening point of epoxy resin, and the spiral flow decreased with that. It can be considered that these phenomena are due to the increase of crosslinking density of EMC according to the increase of softening point. The transition points were found out in the thermal expansion coefficient data in the rubbery state (${\alpha}_2$) and the flexural strength data. These can show the decrease of filler dispersion according to increase of epoxy resin viscosity.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.29-34
• /
• 2012

This study was conducted to investigate the effect of storage time of manure on the concentration of odorous compounds. Levels of odorous compounds were measured from manure incubated in $20^{\circ}C$ for 6 wk in pilot chamber whose structure is similar to slurry pit. Levels of short chain fatty acids were decreased (p<0.05) by 4,159, 1,925, 844, and 483 ppm as storage time increased as 0, 2, 4, and 6wk, respectively. Transfatty acid level was not changed for 2wk but decreased (p<0.05) afterwards (levels were 250, 248, 151, and 61 ppm at 0, 2, 4, 6wk, respectively). Levels of phenol compounds were decreased (p<0.05) by 68, 48, 26, and 9 as storage time increased as 0, 2, 4, 6wk, respectively. Phenol concentration was increased whereas p-cresol level was decreased as storage time increased showing ratios of phenol and p-cresol were 6:94, 34:66, 51:49, and 67:33 at 0, 2, 4, and 6wk, respectively. Concentration of indole compounds was not different for 2wk but increased (p<0.05) after 4wk. The ratios of indole and skatole were 71:29, 42:58, 28:72, and 36:64 at 0, 2, 4, and 6wk, respectively. Skatole concentration was increased as storage time increased. Therefore, our current results indicate that levels of volatile fatty acid and phenol compounds were deceased but indole compounds were increased as manure storage time was increased.