• 패션비즈니스
• /
• 제23권2호
• /
• pp.1-17
• /
• 2019

The objective of this study was to investigate electrical conductivity of fabrics from polyester (PET) and Nylon (N) containing polyurethane (PU), with silver paste patterns screen-stenciled in three directions. The PET/PU and N/PU fabrics knitted or woven were uniaxially strain-recovered up to 22.5% in three times when each change in electrical resistance was simultaneously measured. This study established four variables that complexly affected electrical conductivity of these specimens; fabric structures, components, cover factors, and the percolation of silver particles. The woven or knitted fabric structures did not distinctively cause the changes in electrical resistance, however, the woven fabrics with the diagonal patterns showed their relatively high electrical resistance. The PET/PU fabrics with increasing the PET proportion generally presented the opposite propensity to its electrical conductivity. The changes in electric resistance of the PET/PU 85/15 2/1 twill and double plain fabrics instantaneously responded to the rate of elongation. The PET/PU group exhibited a reverse correlation between its cover factor and electrical resistivity. The highest electrical conductivity of the PET/PU 95/5 interlock fabric, with very few fluctuations, was attributed to the deep percolation of the silver particles that bridged the gaps between one loop and another. On the other hand, the occurrence of the silver cracks along with the elongated direction led to the immeasurably high change in electrical resistance as the strain increased.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.500-507
• /
• 2008

파우더류 화장품의 제조 시 사용되어지는 분쇄기 중 스크린밀, 핀밀, 제트밀을 이용하여, 대표적인 화장품용 안료(탈크, 마이카, 나이론파우더, 실리카, 이산화티탄)를 분쇄하여 각 안료들의 분쇄 특징과 분쇄기의 특성에 대한 연구를 수행하였다. 또한 분쇄평가를 위해 산화철을 흔적물질로써 사용하여 실험하여 CIE LAB의 변화로써 평가하였다. 스크린밀과 핀밀의 분쇄는 박편상 분체에서는 종횡단면의 분쇄 중 종단분쇄가 더 많이 발생하고 제트밀에서는 종횡 단면의 분쇄가 모두 발생하는 것으로 사료되고 구상파우더인 나이론파우더와 실리카의 경우, 1차 입자화 혹은, 역으로 정전기적 인력에 의한 약한 응집이 나타나지만, 제트밀에서는 분쇄압력 2bar의 조건 이상에서는 나이론파우더의 합일 혹은 변형이 발생하고, 실리카는 심한 파쇄가 발생하였고, 이산화티탄은 모든 분쇄기에서 1차입자화가 되었다. 분쇄에 따른 산화철의 색상변화는 핀밀이 가장 우수한 결과를 보였다. 이들 결과로부터 실질적인 제품 제조 공정에서는 박편상 및 침상 원료의 사전처리 이용에는 제트밀을 이용하고, 색상 발현을 위한 분쇄, 즉 조색은 스크린밀과 핀밀을 이용하는 것이 좋을 것으로 판단된다. 또한 산업적인 공정조건을 고려하면, 스크린밀은 4회 분쇄 시, 핀밀은 2회 분쇄 시, 제트밀은 1bar의 분쇄압력 조건 하에서 전반적인 분쇄효율이 우수한 것으로 사료된다.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.292-303
• /
• 1998

The arbitrary primer polymerase chain reaction(AP-PCR) and Southern blot restriction fragment length polymorphism(RFLP) were used to genotype the cariogenic pathogen S. mutans in children. Following the morphologic chracteristics of colony on selective medium for S. mutans, total genomic DNA from 155 strains was extracted by conventional methods. Among 155 strains, 143 strains (92.3%) were confirmed S. mutans by PCR with dexA gene and 114 strains were used in this study. Three random sequence 10-base oligonucleotide primers were chosen for AP-PCR. The amplified DNA products were separated electrophoretically in a 2% agarose gel containing ethidium bromide and the banding patterns were compared among different strains. For RFLP analysis, DNA was digested with EcoRI and BamHI, separated on a 0.7 % agarose gel and transferred to a nylon membrane. The membrane was probed with a previously characterised 1.6 kilobases (kb) DNA fragment cloned from gtf B gene of S. mutans. The probe was labeled with isotope[$^{32}P-{\alpha}CTP$], and hybridized fragments were detected with intensifying screen. AP-PCR produced 4-8 DNA bands in the 0.25-10 kb regions and distinguished 9, 10 or 12 genotypes, depending on the specific primer used. Southern blot RFLP analysis revealed 2 hybridization patterns consisting of 1 DNA fragments 450, 500 bp. These results indicate that AP-PCR is more discriminative method for genotyping of S. mutans.

• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Journal of Microbiology and Biotechnology
• /
• 제13권2호
• /
• pp.282-286
• /
• 2003

The purpose of this study was to isolate a specific DNA probe for the strain ATTC 25611 of the species Prevotella intermedia by using a new rapid screening mothod. The whole-genomic DNA of P. intermedia ATCC 25611 was isolated and purified. The HindIII-digested genomic DNAs from the strain were cloned by the random cloning method. To screen the strain-specific DNA probe, inverted dot blot hybridization tests were performed. In this assay, 20 ng of recombinant plasmids containing the HindIII-digested genomic DNA fragment were boiled and blotted onto a nylon membrane, and hybridized with digoxigenin-dUTP labeled genomic DNAs in a concentration of 100 ng/ml. Southern blot analysis was performed in order to confirm the results of the inverted dot blot hybridization tests. The data showed that a Pi34 probe (2.1 kbp; 1 out of 32 probes) was specific for P. intermedia strain ATCC 25611 and could be useful for the detection and identification of the strain, particularly in epidemiological studies of periodontal disease.

• 대한핵의학회지
• /
• 제37권1호
• /
• pp.43-52
• /
• 2003

Microarray technology allows the simultaneous analysis of gene expression patterns of thousands of genes, in a systematic fashion, under a similar set of experimental conditions, thus making the data highly comparable. In some cases arrays are used simply as a primary screen loading to downstream molecular characterization of individual gene candidates. In other cases, the goal of expression profiling is to begin to identify complex regulatory networks underlying developmental processes and disease states. Microarrays were originally used with ceil lines or other simple model systems. More recently, microarrays have been used in the analysis of more complex biological tissues including neural systems and the brain. The application of cDNA arrays in neuropsychiatry has lagged behind other fields for a number of reasons. These include a requirement for a large amount of input probe RNA In fluorescent-glass based array systems and the cellular complexity introduced by multicellular brain and neural tissues. An additional factor that impacts the general use of microarrays in neuropsychiatry is the lack of availability of sequenced clone sets from model systems. While human cDNA clones have been widely available, high qualify rat, mouse, and drosophilae, among others are just becoming widely available. A final factor in the application of cDNA microarrays in neuropsychiatry is cost of commercial arrays. As academic microarray facilitates become more commonplace custom made arrays will become more widely available at a lower cost allowing more widespread applications. in summary, microarray technology is rapidly having an impact on many areas of biomedical research. Radioisotope-nylon based microarrays offer alternatives that may in some cases be more sensitive, flexible, inexpensive, and universal as compared to other array formats, such as fluorescent-glass arrays. In some situations of limited RNA or exotic species, radioactive membrane microarrays may be the most practical experimental approach in studying psychiatric and neurodegenerative disorders, and other complex questions in the brain.

• 한국농공학회논문집
• /
• 제63권5호
• /
• pp.39-47
• /
• 2021

With rising concerns about pesticide spray drifts, this study analyzed the drift patterns of two typically-used nozzles, XR nozzle and AI nozzle, concerning their working pressures and wind speeds by wind tunnel experiments. AI nozzle showed low drift potential with larger droplet sizes compared to XR nozzle. Airborne and deposition drifts of XR nozzle were two times higher than those of AI nozzle under high wind speeds (≥2 m s^-1). In all cases, higher working pressures decreased the droplet sizes, thereby increasing the airborne and deposition drifts. Higher wind speeds also resulted in more airborne drifts, while ground deposition was increased under lower wind speeds. These effects of working pressures and wind speeds on the airborne and deposition drifts were observed at leeward distances less than 4 m from the nozzles. However, the airborne and deposition drifts were barely affected by the working pressures and wind speeds at leeward distances more than 11 m. The measurements were fitted to regression models of the drift curve with acceptable R² values greater than 0.8, demonstrating that further studies will be useful to settle domestic issues of spray drifts.

• Journal of Animal Science and Technology
• /
• 제44권1호
• /
• pp.105-112
• /
• 2002

동물성 부산물 사료(우모분, 우지박, 내장분)단백질의 반추위내 분해특성과 하부장기내 이용성에 대한 열처리 효과를 구명하기 위하여 반추위와 십이지장에 누관이 장착된 Holstein 건유우 3두를 공시하였다. 시험사료에 대한 열처리는 149$^{\circ}C$가 유지되는 oven에서 4시간동안 처리한 후, 1 mm체를 통과시켰다. 시험사료의 반추위내 분해특성은 발효시간별 분해율에서 비선형회귀식을 유도하여 구하였고, 사료단백질의 하부장기내 이용성은 mobile nylon bag기법으로 추정되었다. 농후사료와 orchard grass를 60:40의 비율로 급여하였으며, 물과 mineral block은 자유섭취토록 하였다. 조단백질의 반추위내 유효분해도(k=0.05) 및 하부장기내 소실율에 있어서 우모분은 각각 30.2% 및 56.2%, 우지박은 75.0% 및 18.6% 그리고 내장분은 56.4% 및 37.9%였다. 시험사료에 대한 열처리효과에 있어서 조단백질의 반추위내 유효분해도는 우모분과 내장분은 증가하였으나 우지박은 감소되었고(P$<$0.05), 하부장기내 조단백질 소실율에서는 우지박은 증가된 반면, 우모분과 내장분은 감소되어(P$<$0.05) 상반되는 결과를 나타내었다. 반추위 미분해 사료단백질의 하부장기내 이용율은 우모분, 우지박 및 내장분에 대해서 각각 80.4%, 83.8% 및 86.9%였으며, 열처리를 함으로써 우모분과 우지박은 각각 94.0% 및 91.3%로 향상되었으나, 내장분은 76.5%로 낮아졌다(P$<$0.05).

• Radiation Oncology Journal
• /
• 제21권1호
• /
• pp.54-65
• /
• 2003

목적 : 동시에 대량으로 유전자발현 양상을 검사할 수 있는 cDNA microarray 기법을 이용하여 자궁경부암에서 특징적으로 나타나는 유전자발현 양상을 알아보고, 방사선치료 및 방사선 항암화학요법 병용치료시의 유전자발현 변화양상을 파악하고자 하였다. 대상 및 방법 :자궁경부 편평상피암으로 확진된 후 근치목적 방사선치료를 단독으로 시행한 8명과 항암화학요법을 병행한 8명에서 채취한 종양조직을 대상으로 하고, 정상 자궁경부 3례를 대조군으로 하였다 조직 생검은 치료 전과 외부 방사선치료 16.2$\~$27 Gy에 두 번하였다. 항암화학요법을 병용한 경우, 5-FU 1,000 mg/m$^{2}$을 제 1일부터 5일까지 정주하고, clsplatin 60 mg/m$^{2}$을 제 1일에 정주하였다. cDNA microarray는 종양조직에서 추출한 total RNA를 역전사(reverse transcription)방법을 이용하여 (P-33)을 표지한 cDNAS를 제작, nylon membrane에 hybridization하였다. 이후 membrane을 phosphor-imager screens에 옮겨 1$\~$5일 동안 노출시킨 후 이미지를 스캔하였다. 유전자의 발현정도는 각 스팟(spot)들의 방사능 강도로 나타나는데, 각 스팟의 픽셀(pixel)을 Arrayguage를 사용하여 산출한 후 엑셀파일로 저장하였다. 유전자의 발현정도 비교는 원 자료(original data)를 Z-변환을 통해 보정(normalized)한 후 Z-ratio값을 산출하여 시행하였다. 결과 : 대조군에 비해 자궁경부암에서 Z-ratio 2.0 이상으로 유의한 발현증가를 보인 유전자들은 integrin-linked kinase, CDC28 protein kinase 2, Spry 2, ERK 3 등 15개로 주로 세포성장과 증식, 세포주기, 신호전달 등에 관련된 유전자들이었으며, Z-ratio -2.0 이하의 유의한 발현감소는 G protein-coupled receptor kinase 6외 6개였다. 방사선 단독치료를 시행한 후 Z-ratio 2.0 이상 발현이 증가한 것은 cyclic nucleotlde gated channel외 3개의 Expressed sequence tags (EST)들이었고, Z-ratio -2.0 이하의 발현감소를 보인 것들에는 치료전 종양세포에서 발현이 증가되었던 세포성장과 증식, 세포주기, 신호전달 등에 관련된 유전자들이 포함되었다 방사선치료와 항암화학요법을 병용했을 때는 방사선 단독치료에 비하여 세포성장과 증식 및 신호전달 관련 유전자들이 상대적으로 높게 발현되었으며, 이외에도 혈관형성(angiopoietin-2), 면역반응(formyl peptide receptor-like 1), DNA 손상회복에 관련된 유전자(CAMP phosphodiesterase)의 발현은 증가되고 세포고사(death associated protein kinase)에 관련된 유전자는 발현 감소를 보였다. 결론 : 자궁경부암에서분열과 증식 및 신호전달에 관여하는 여러 종류의 유전자들 발현이 동시다발적으로 증가되어 있다는 것과 방사선치료를 시행하면 이들 유전자의 발현이 감소하여 종양세포의 분열과 증식이 저해된다는 것을 확인하였다. 방사선 단독치료와 항암화학요법 병용치료를 비교하면 그 유전자 발현양상이 다르므로 향후 이번연구에서 나타난 유전자들에 대한 추가 연구가 필요하며, 이는 개별화된 맞춤형 치료법을 개발하는데 기초자료로 사용될 수 있을 것으로 기대된다.