• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.158-161
• /
• 1996

Microfibers of Poly(ethylene terephthalate)(PET)/Nylon 6 (P/N) was heat set at 170C in a fixed state and then treated with hydrazine at 30C for 5, 10, 15, 20, 30 and 40 h. Weight loss from the hydrazine treatment increased according to the hydrazine concentration(Fig.1). In order to investigate in detail the effect of the electrostatic attraction between the dye anion and hydrazide groups in cooperated by hydrazinolysis, -potential of P/N fiber was measured by streaming potential method. The surface charge density, o, of the fiber was evaluated from the -potential.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.33-36
• /
• 2011

Recently, It has increased to use ultra high strength concrete. It is effective to mix organic fibers for preventing spalling. But if fiber mixed, flowability of concrete is decreases. The aim of this study is to evaluation of fire resistance performance for fiber-mixed ultra high strength concrete on field application. As a result, flowability of nylon fiber mixed concrete is better than polyethylene fiber mixed. In non-fiber and polyethylene fiber mixed concrete, spalling occurred. And strain converged at 0.004. Also, residual strength could not evaluate. Nylon fiber mixed concrete is effective to prevent spalling. And it remians 50% residual strength compare with compressive strength at room temperature.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.396-403
• /
• 2000

The purpose of this study was to investigate the dyeing properties of silk, wool, nylon and poly(ethylene teraphtlate)〔PET〕 fabrics dyed with Tumeric(Curcuma longa) extracts. The dyeing property and color fastness were investigated by using the extracts and the post mordanting with Aluminum, Copper and Iron salts. In the UV-visible spectra, the maximum absorption of wavelength of the extract with methyl alcohol appeared at 420nm, and that of the extract with distilled water was at 415nm. Increasing the dyeing temperature, the K/S values of dyed fabrics were increased. The optimum dyeing condition was 30∼60 minute of dyeing time at pH 5∼5.6. Surface colors of silk and wool became dark by using mordants compared to those of nylon and PET fabrics. The drycleaning fastness of fabrics dyed with the extracts was good. The laundering and light fastness were improved by using mordants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.159-168
• /
• 2011

In this study, we find out the feasibility of self-consolidating concrete with EP nylon fiber. Three kinds of method were used; when length of nylon fiber is differed for the experiment to investigate usability of nylon fiber with enhanced performance by dispersing-agent coating in self-consolidating concrete, when mixing in other organic fibers (polypropylene, cellulose) and in case of Binary Blended and Ternary Blended concrete mixed with different types of mineral admixtures (blast-furnace slag and fly ash). Based on the results of the experiment described above, comparison was made on the basic properties and dynamic characteristics of general fiber reinforced concrete mixed with enhanced performance nylon fiber and SCC mixed with enhanced performance nylon fiber as a Mock-up test prior to the experiment of application to the actual structure. Considering characteristics and durability of the fresh and hardened self-compacting concrete, dynamic characteristics and durability were found to be more outstanding when using nylon fiber for the mineral admixtures used, dynamic characteristics and durability were found to be more outstanding when using blast-furnace slag.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.1
• /
• pp.49-56
• /
• 1979

To investigate detergency of various woven fabrics in relation to the detergents and washing temperature. cotton, polyester/cotton (p/c), nylon, acetate, and polyester were soiled in aqueous artificial ($carbon-CCl_4$) soil. Each fabric was washed with soap, alkaline and neutral synthetic detergents at $30^{\circ}C$, $40^{\circ}C$ and $60^{\circ}C$ respectively. The results obtained may be summerized as follows; 1. In soap, ascension of temperature had the most important effect upon washing efficiency and the higher the temperature was, the higher the washing efficiency was showed in all fabrics. And in case of alkaline synthetic detergent, nylon and p/c fabrics were much more difficult to clean at higher temperature and also acetate and polyester had the best efficiency at $40^{\circ}C$. Detergency of neutral detergent was good but the effect of temperature in neutral detergent was less than in soap. 2. Washing efficiency of cotton was less than that of others. 3. The higher the temperature was, the higher the washing efficiency of cotton in all detergents, and the best was in soap. In p/c, detergency of neutral detergent was good but effect of ascension of temperature was lower than in soap. In nylon, washing efficiencies of alkaline synthetic detergent and neutral detergent were excellent at 30°C but detergency of soap at $60^{\circ}C$ was best. In case of acetate, detergency of all detergents was about the same at $30^{\circ}C$ but that of soap at $60^{\circ}C$ was best. In polyester at $30^{\circ}C$, efficiency of neutral detergent was excellent but that of soap was more excellent at higher temperature and the best detergency of alkaline synthetic detergent showed at $40^{\circ}C$. In general. the higher the temperature is, the higher the washing efficiency of soap is. But when synthetic fibers of nylon and polyester are washed with synthetic detergents, washing at lower temperature is advisable.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.153-160
• /
• 2013

PURPOSE. This in vitro study intended to investigate the mechanical and thermal characteristics of Valplast, and of polymethyl methacrylate denture base resin in which different esthetic fibers (E-glass, nylon 6 or nylon 6.6) were added. MATERIALS AND METHODS. Five groups were formed: control (PMMA), PMMA-E glass, PMMA-nylon 6, PMMA-nylon 6.6 and Valplast resin. For the transverse strength test the specimens were prepared in accordance with ANSI/ADA specification No.12, and for the impact test ASTM D-256 standard were used. With the intent to evaluate the properties of transverse strength, the three-point bending (n=7) test instrument (Lloyd NK5, Lloyd Instruments Ltd, Fareham Hampshire, UK) was used at 5 mm/min. A Dynatup 9250 HV (Instron, UK) device was employed for the impact strength (n=7). All of the resin samples were tested by using thermo-mechanical analysis (Shimadzu TMA 50, Shimadzu, Japan). The data were analyzed by Kruskal-Wallis and Tukey tests for pairwise comparisons of the groups at the 0.05 level of significance. RESULTS. In all mechanical tests, the highest values were observed in Valplast group (transverse strength: $117.22{\pm}37.80$ MPa, maximum deflection: $27.55{\pm}1.48$ mm, impact strength: $0.76{\pm}0.03$ kN). Upon examining the thermo-mechanical analysis data, it was seen that the E value of the control sample was 8.08 MPa, higher than that of the all other samples. CONCLUSION. Although Valplast denture material has good mechanical strength, its elastic modulus is not high enough to meet the standard of PMMA materials.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.193-194
• /
• 2009

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.195-196
• /
• 2009

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.264-267
• /
• 1998

고속용융방사는 권취속도의 고속화에 의해 공정시간 및 제조비용 절감을 통해 생산성을 극대화할 수 있어 산업적으로 아주 중요한 섬유 형성 공정이다 또한 생산성의 향상을 위해 방사속도가 증가하는 추세인데, 이러한 경향은 공정-구조-역학적 성질의 관계를 정립해야 하는 필요성을 증가시키고 있다. (중략)