• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.264-267
• /
• 1998

고속용융방사는 권취속도의 고속화에 의해 공정시간 및 제조비용 절감을 통해 생산성을 극대화할 수 있어 산업적으로 아주 중요한 섬유 형성 공정이다 또한 생산성의 향상을 위해 방사속도가 증가하는 추세인데, 이러한 경향은 공정-구조-역학적 성질의 관계를 정립해야 하는 필요성을 증가시키고 있다. (중략)

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.363-369
• /
• 2013

In this work, the effects of ozone treatments on mechanical interfacial properties of carbon fibers-reinforced nylon-6 matrix composites were investigated. The surface properties of ozone treated carbon fibers were studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Mechanical interfacial properties of the composites were investigated using critical stress intensity factor ($K_{IC}$). The cross-section morphologies of ozone-treated carbon fiber/nylon-6 composites were observed by scanning electron microscope (SEM). As a result, $K_{IC}$ of the ozone-treated carbon fibers-reinforced composites showed higher values than those of as-received carbon fibers-reinforced composites due the enhanced $O_{1s}/C_{1s}$ ratio of the carbon fiber by the ozone treatments. This result concludes that the mechanical interfacial properties of nylon-6 matrix composites can be controlled by suitable ozone treatments on the carbon fibers.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.74-79
• /
• 1999

We present a simple design rule for a passive temperature-compensating optical package. We also present experimentally that a package fabricated by using the design rule compensates the temperature dependence of the resonant wavelength of an optical long period fiber grating by varying the strain inside the fiber, The package fabricated in this work consists of two pieced of brass tube, 10 mm long, and a piece of nylon rod, 45.4 mm long. It is shown that the package can compensate the temperature-induce wavelength shifts of the long period grating to a range of 6.8 pm/$^{\circ}C$, compared with 0..48 nm/$^{\circ}C$ for an uncompensated grating. The reduced strength of the fiber caused by exposure to ultraviolet limits the performance of the package to the range operating temperature form -3 $^{\circ}C$ to 7$0^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.80-87
• /
• 2006

Nowadays, interests of ultraviolet(UV) protection increased, since the UV dosage on the earth surface has increased over years. Overdose of UV can cause various skin, eye, and even DNA damages. Therefore, it is need to develop a proper mean to protect human skin and eye from UV radiation. In this study, the UV protective effect of green tea extract dyed fabrics with various fiber types were examined. Green tea has an active moiety called 'catechin' having benzene rings in its structure, which would exert a proper UV protective property. Green tea dyed fabrics showed the increase in UV protection, and silk showed the highest increase in UV protection (from 52.2% to 84.5% in UV-A, from 66.1% to 90% in UV-B). The order of UV-A protection increase is silk, wool, nylon and acrylic, PET, and cotton. The order of UV-B protection increase is silk nylon, wool, acrylic, cotton, and PET. In case of silk and nylon, the UV protection property gradually increased as the concentration of green tea extract increased. As a result, it was proven that green tea extract dyeing can improve UV protection property of dyed fabrics in environment-friendly and biocompatible manners.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.28-36
• /
• 2019

The adhered mortars in recycled aggregate may lower the performance of the concrete, such as by reducing in strength and durability, and cracking. In the present study, the effects of nylon fiber (NF) on the mechanical and durable properties of 100% ordinary portland cement (OPC) and 50% ground granulated blast furnace slag (GGBFS) concretes incorporating recycled coarse aggregate (RA) were experimentally investigated. Concrete was produced by adding 0 and $0.6kg/m^3$ of NF and then cured in water for the predetermined period. Measurements of compressive and split tensile strength, water permeable pore and total charge passed through concrete were carried out, and the corresponding test results were compared with those of concrete incorporating crushed coarse aggregate (CA). In addition, the microstructures of 28-day concretes were observed by using SEM technique. Test results revealed that the RA concrete showed lower performance than CA concrete because of the adhered mortars in RA. However, it was obvious that the addition of NF in RA concrete was much effective in enhancing the performance of the concretes due to the bridge effect from NF. In particular, the application of NF2 (19 mm) exhibited a somewhat beneficial effect compared with concrete incorporating NF1 with respect to mechanical properties, especially for RA concrete.

• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.56-63
• /
• 1996

Low-temperature plasma treatment or sputter etching is of interest as one of the techniques to modify polymer surface. In this study, poly(ethylene terephthalate)(PET), nylon 6 and cotton fabrics dyed three black dyes were subjected to low-temperature argon plasma and also sputter etching. In relation to bathochromic effect, the surface characteristics of the treated fabrics and films were investigated by means of critical surface tension, SEM and ESCA measurement. The depth of shade of fabrics more increased by the sputter etching technique than argon plasma treatment. Many microcraters on the fiber surface formed by the sputter etching resulted in increase of surface area of the fiber and wettability, but the hydrophobic group was increased by the results of ESCA analysis. In particular the change in reflective index of the fibers was much more effective than the chemical composition of the fiber surface on increasing of the depth of shade.

• Composites Research
• /
• v.16 no.2
• /
• pp.18-25
• /
• 2003

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of fiber aspect ratio(AR), diameter ratio(DR), interphase condition, and fiber content. The tensile strength increased with increasing fiber AR(20 min.) and good interphase conditions. The short-fiber(DR=3 and AR=20 min.) reinforced SBR did not show the dilution effect for all interrhase conditions. And the short-fiber(DR=3 and AR=20min.) reinforced NR did not show the dilution effect except for the no-coating. The tensile moduli were significantly improved due to fiber AR. fiber content, and good interphase at same DR. The better interphase condition showed the higher pull-out force at same DR. Also, the stress analysis near the fiber end carried out using axisymmetric FEA to be convinced of the reinforcing mechanism. It is found that the fiber AR, interphase and DR have an important effect on tensile properties.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.177-178
• /
• 2003

1934년 Formhals[1,2]에 의해 최초로 특허화된 전기방사(electrospinning)는 최근에 나노기술의 급격한 부각과 함께 과학분야에서 큰 관심의 대상이 되고 있다. 이러한 전기방사는 전형적인 섬유제조방법인 습식ㆍ건식ㆍ용융방사와는 달리 전기적인 힘(electric force)을 이용하여 머리카락 굵기의 100분의 1의 작은 크기의 직경을 갖는 섬유를 제조할 수 있는 방법이다[1,2]. 전기방사에 의해 제조된 웹은 단위 면적당 큰 표면적, 작은 기공, 높은 다공성을 가지고 있기 때문에 필터, 복합체의 강화제, 조직공학에서의 담체(scallold)뿐만 아니라 의료 분야 등에 응용될 수 있다[1,2]. (중략)

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2013

This study aimed to evaluate the effects of shaking stress in the hemolymph of the Manila clam Ruditapes philippinarum by quantification of nitric oxide (NO) levels. The clams were divided into 3 groups as follows: clams placed in a plain container (control), clams injected with nitro-L-arginine methyl ester (NAME, an NO inhibitor), and clams in a container filled with nylon fiber at a density of $1kg/m^3$. Subsequently, each group was placed in sea water and shaken at 100 rpm for 6 h. The concentration of NO was quantified by using DAF assay and Griess assay. Both the assays showed that while shaking significantly increased the NO concentration, the NO inhibitor reduced the NO concentration in the hemolymph of the clams tested. In addition, the nylon fiber, which was used as a filler, effectively prevented the increase in NO concentration. This result suggests that measurement of NO concentration is a useful tool for evaluation of physiological stress in marine bivalves. In addition, it should be considered that a filler is necessary when dredge fishing or the suspended clam culture method is developed.