• Asian-Australasian Journal of Animal Sciences
• /
• 제33권6호
• /
• pp.930-940
• /
• 2020

Objective: This study was conducted to evaluate changes in nutritional value and in situ dry matter (DM) degradability of oak and pine wood before and after steam-digestion process (60 min/160℃/6 atm) and feeding effect of the oak roughage on performance and behavior of Hanwoo steers. Methods: Chemical composition and tannin concentration were analyzed for oak and pine trees before and after the pretreatment. In situ DM and effective degradability of these samples were assessed using a nylon bag method. In vivo trial was performed to estimate animal performance and behavior, using steers fed total mixed ration (TMR) diets containing 0% (control), 25% (OR-25), and 50% (OR-50) of the oak roughage. Eighteen steers were allocated into nine pens (2 steers/pen, 3 pens/treatment) for 52 days according to body weight (BW) and age. Results: By the steam-digestion treatment, the neutral detergent-insoluble fiber was decreased from 86.5% to 71.5% for oak and from 92.4% to 80.5% for pine, thereby increasing non-fiber carbohydrate. In situ DM degradability of treated oak reached 38% at 72 h, whereas that of untreated oak was only 11.9%. The 0 h degradability of the treated pine increased from 5.9% to 12.1%, but the degradability was unchanged thereafter. Animal performance including BW, average daily gain, DM intake, and feed conversion ratio was not different among control and oak treatments. No differences were detected in animal behavior such as lying, standing, rumination, drinking, and eating, except walking. Walking was higher in control than oak treatments with numerically higher eating and lower lying times, probably due to bulkier characteristics of rice straw in the diet. Conclusion: This study demonstrates that the oak roughage can be substituted for 50% of total forage or 100% of rice straw in TMR diets at early fattening stage of Hanwoo steers.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.100-100
• /
• 2017

2016년부터 중국에 수출한 진공포장 쌀이 진공이 풀려 중국 현지 소비자들에게 품질에 대한 신뢰저하로 외면 받아 판매에 어려움을 겪었다. 진공풀림 원인은 주로 포장재의 모양, 과열 열접착 및 운송 중 부주의 등을 들 수가 있다. 따라서 본 연구에서는 쌀 진공포장 후 진공 풀림현상이 발생되는 원인을 분석하고, 진공포장에 적절한 포장재 및 취급조건에 대해 구명하여, 중국 쌀 수출 시 품질신뢰도 및 경쟁력 제고로 쌀 수출 확대를 위해 진공 포장재, 진공포장기술 및 운송 취급 방법을 제시하고자 하였다. 미곡종합처리장에서 사용하고 있는 플라스틱 필름 포장재의 적합 여부를 살펴보기 위하여 산소투과도 및 투습도를 산소투과도 측정장치(OX-Tran Model 2/61, Mocon, USA), 투습도 측정장치(Permatran-W Model 3/33, Mocon, USA)를 이용하여 측정하였다. 적정 열접착 온도를 구명하기 위하여 열접착 작업시간 간격 3, 5, 10초 3수준으로 하고 가열시간을 0.2초~2초까지 9수준으로 설정하여 포장필름을 열접착한 후 접착상태를 조사하였다. 진공 포장된 쌀을 골판지상자에 2차 포장하여 운송할 때 진공풀림 현상이 발생 여부를 조사하기 위해 가상 운송시험을 진동시험 장치를 이용하여 수직 및 수평으로 진동시험을 수행하였으며, 또한 취급조건에 따라 진공풀림을 조사하기 위하여 골판지 상자단위, 비닐포장 단위로 50, 70, 90cm 높이에서 낙하 시험을 하고 진공풀림여부를 조사하였다. 유통 중인 쌀 진공 포장재는 나이론(nylon)+선형저밀도폴리에틸렌(LLDPE) 복합필름으로 산소투과도가 $30{\sim}70cc/m^2{\cdot}day$, 투습도가 $2{\sim}4.5g/m^2{\cdot}day$로 산소투과도 및 투습도가 충분히 낮아 진공포장재로 적합했으며, 적정 열접착온도 조건은 $130{\sim}150^{\circ}C$에서 1~1.5초가량 가열해야 되는 것으로 조사되었다. 진동시험 및 낙하시험결과, 골판지박스 포장 시 완충재를 사이에 넣은 경우 진골풀림이 적었고, 상자단위나 비닐포장단위 모두 가능한 50cm보다 높은 곳에서 낙하충격을 받지 않도록 취급해야 할 것으로 판단되었다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.519-525
• /
• 2010

Purpose: Of various effects of relaxin, we assumed that anti-fibrotic effects, neovascularization effects and vasodilatation effects of relaxin might enhance the survival rate of skin flap. In the current study, we used adenovirus expressing relaxin genes to examine whether these genes could enhance the survival rate of a skin flap. Methods: A total of 30 Sprangue-Dawley rats were divided into three groups: RLX group (10; relaxin virus injected group), CTR group (10; no gene coded virus injection group), and PBS group (10; PBS injected group). Each group was intradermally injected with the virus ($10^7$ PFU) and PBS 48 hours before and immediately before the flap elevation. A distally based flap $3{\times}9\;cm$ in size was elevated on the dorsal aspect of each rat. Following this, a flap was placed in the original location and then sutured using a #4-0 Nylon. A surviving area of the flap was measured and then compared on postoperative days 3, 7 and 10. Using a laser Doppler, the amount of blood flow was measured. On postoperative day 10, tissues were harvested for histologic examination and the number of blood vessels was counted. Results: There was a significant increase in the area of the flap survival in the RLX group on postoperative days 3 and 7. The Doppler measurement also showed significantly increased blood flow immediately after the operation and on postoperative days 7 and 10. The number of blood vessels was significantly greater in the RLX group in the tissue harvested on postoperative day 10. The VEGF concentration was significantly higher in the RLX group than others in the tissues harvested on postoperative day 10. Conclusion: Following an analysis of the effects of relaxin-secreting adenovirus on the survival of a flap, the surviving area of the flap and the blood flow also increased. A histopathology also showed an increase in the number of blood vessels and the concentration of VEGF.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.111-111
• /
• 2012

나노테크놀로지는 종래의 가공으로는 얻기 힘들었던 섬유가공 효과를 간단하게 할 수 있는 기술이다. 현재 각국의 기능성 나노 가공제를 섬유에 응용하는 나노 테크놀로지는 현재 공업 생산되고 있는 면, 모, 견 등의 천연섬유 및 polyester, Nylon 등의 합성섬유의 원단에 적용하는 데서 출발하고 있다. 이러한 나노기술은 기존의 설비와 물을 사용하는 것이 큰 특징이고, 특별한 기계장치가 필요하지 않으며, 소규모의 실험장비만 있어도 현장투입이 가능한 나노입자의 제조가 가능하기 때문에 대량생산이 용이하고 설비투자는 원칙적으로 필요하지 않는다. 또한, 나노입자의 분산을 제대로 시키면 그 사이즈가 빛의 가시광선 영역의 파장(400~800nm)에 비해 절반 수준이하 크기의 입자가 대부분을 차지하기 때문에 염색성, 태의 변화가 적어 앞으로 더욱더 나노테크놀로지에 의한 가공이 확대될 것이 예상된다. 특히 유 무기 하이브리드 재료는 용액상태에서 제조되기 때문에 용액 코팅공정의 적용이 가능하여 다양한 코팅에 적극적으로 활용되고 있다. 또한 코팅공정 온도가 상대적으로 낮아서, 유기물의 기능성 발현이 용이하며, 섬유가공에 그대로 적용이 가능하고, 섬유고분자와 내구성 있게 직접 결합이 되어 실용성이 높다 할 수 있다. 또한 나노졸의 형성 시, 혹은 나노졸에 기능성 물질을 첨가함으로서 나노졸과 기능성 물질을 복합화하여 섬유상에 부여하는 것도 가능하다. 최근에 실리카졸의 형성과 성장에 관한 연구는 졸-겔 기술의 발전과 해석 및 상용화에 집중되어 있다. 규산나트륨과 황산 또는 염산을 사용하여 실리카를 생성하는 공정은 tetraethoxysilane (($Si(OC_2H_5)_4$, (TEOS))를 이용하여 합성하는 방법과 달리 대량의 실리카를 경제적으로 생산하는데 방법으로 널리 연구되고 있지만, 많은 연구가 수행되었음에도 불구하고 실리카 졸의 특성, 성장, 제조에 대한 충분한 이해가 이루어 지지 않고 있어, 아직까지 나노크기의 입자를 제조하는 공정에 대해서는 경제성, 효율성, 품질의 균일성이 떨어지는 것이 현실이다. 따라서 본 연구에서는 앞서 연구된 졸-겔 합성기술과 저렴한 원료인 규산나트륨을 이용하여 보다 간단하고 경제적인 방법으로 고부가가치의 다양한 실리카 나노졸을 제조할 수 있는 연구를 하고자 하였다. 이를 위해 규산나트륨 수용액의 특성, 핵 생성에 필요한 규산나트륨 수용액의 산화반응 특성, 그리고 출발용액의 졸겔 반응을 기초로 하여 실리카 졸 형성에 대한 반응물질의 혼합방법, 반응온도, 반응물의 농도, pH등이 최종 실리카 나노졸 제품의 입자 크기와 모양 등에 미치는 영향을 조사하려고 하며 이를 토대로 다양한 크기와 특성을 가진 실리카 나노졸을 제조하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권2호
• /
• pp.240-247
• /
• 2012

Dietary supplementation with conventional linted cottonseed hulls (LCSH) is a common practice in livestock production all over the world. However, supplementation with mechanically delinted cottonseed hulls (DCSH) and cottonseed linter residue (CLR) is uncommon. Cottonseed by-products, including LCSH, DCSH and CLR, were assessed by chemical analysis, an in situ nylon bag technique, an in vitro cumulative gas production technique and in vitro enzyme procedure. The crude protein (CP) content of CLR (302 g/kg dry matter (DM)) was approximately 3 times that of LCSH and 5 times that of DCSH. The crude fat content was approximately 3 times higher in CLR (269 g/kg DM) than in LCSH and 4 times higher than in DCSH. Neutral detergent fibre (311 g/kg DM) and acid detergent fibre (243 g/kg DM) contents of CLR were less than half those of DCSH or LCSH. Metabolisable energy, estimated by in vitro gas production and chemical analyses, ranked as follows: CLR (12.69 kJ/kg DM)>LCSH (7.32 kJ/kg DM)>DCSH (5.82 kJ/kg DM). The in situ degradation trial showed that the highest values of effective degradability of DM and CP were obtained for CLR (p<0.05). The in vitro disappearance of ruminal DM ranked as follows: CLR>LCSH>DCSH (p<0.05). The lowest digestibility was observed for DCSH with a two-step in vitro digestion procedure (p<0.05). The potential gas production in the batch cultures did not differ for any of the three cottonseed by-product feeds. The highest concentration of total volatile fatty acids was observed in CLR after a 72 h incubation (p<0.05). The molar portions of methane were similar between all three treatments, with an average gas production of 22% (molar). The CLR contained a higher level of CP than did LCSH and DCSH, and CLR fermentation produced more propionate. The DCSH and LCSH had more NDF and ADF, which fermented into greater amounts of acetate.

• 한국수산과학회지
• /
• 제32권3호
• /
• pp.338-344
• /
• 1999

Floating debris was recorded from a training ship, $\sharp$1 Kwanaksan, of Pukyong National University with about 10 knots speed at July 15th and 20th of 1997. The sampled area is the middle of southern sea of Korea, divided into 44 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoam, plastics, floating metal and glass containers. All identified items within a 100 $\pm$ 2 m wide band were recorded but ignored if beyond this boundary. The results of distribution and transport of floating debris in the area are as follows: 1. The quantities of debris during the survey were distributed from $1.6\~369.7\;items/km^2$. The most obvious trend is the widespread distribution of all debris. The highest densities of all debris were discovered in the coastal waters of Namhae and Yokji island, and of about 50 km off from the southward of Yokji and about 74 km off from the eastward of Komun island. Especially many of small styrofoams within $\phi$20 cm were observed in these segments. 2. Styrofoams and plastics were composed of $83.5\%$ among all debris, next woods items, $9.8\%$. 3. The quantities, distribution shapes and composition of debris were varied as the observed duration and the natures of each items. 4. These phenomena are concluded that firstly they depend on the river discharges included debris due to precipitation falls, secondly inflow or dumping debris are drifting to the off-shore by Kuroshio currents present at their adjacent sea, But on the basis of the observed data it is difficult that source position, quantities and inflow items of debris are identified, and also the transport processes is pursue. further more surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the stationary area, finding of sources, removal method of debris and resistants of marine productivity.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.50-66
• /
• 1998

This study was conducted to estimate crystalline silica contents in airborne respirable dust from various manufacturing industries and to compare analytical performance of two methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy (FTIR). For this study, various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: foundry, brick, potteries, concrete, and abrasive material, etc. Both personal and area respirable dust samples were collected using 10 mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size, polyvinylchloride (PVC) filters as collection media. In addition, total dust samples were collected side-by-side to the respirable samples. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 0500, 7500, and 7602 for dust collection and quartz analysis. In addition, bulk samples were collected and analyzed by X-ray fluorescence (XRF) for minerals. In this article, only the results obtained from foundry are reported. The results from various other industries will be published in future articles. The respirable dust concentrations from personal samples by cyclone were $0.46-1.06mg/m^3$ and those from area samples were $0.34-0.73mg/m^3$. Dust concentrations of personal samples were significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. Total dust concentration ranged $1.24-3.40mg/m^3$. The mean quartz contents estimated by FTIR and XRD in the personal respirable dust samples were 5.12% and 4.41%, respectively, without significant difference between them. For quartz analyses, the two techniques were highly correlated with $r^2$ ranged 0.803-0.920. But the results by FTIR were mostly higher than those by XRD. In addition, cristobalite was not detected by FTIR. Significant correlations between contents of crystalline silica and such minerals as $Al_2O_3$, CaO, $TiO_2$, and $K_2O$ suggest possible interferences from these minerals.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.376-380
• /
• 2006

An experiment was conducted to study the effect of temperature and pH on in vitro nutrient degradability, volatile fatty acid profile and methane production. The fermenter used was the semi-continuous system, known as the rumen simulation technique (RUSITEC). Sixteen cylinders were used at one time with a volume of 800 ml, the dilution rate was set at 3.5%/hour, the infused buffer being McDougall's artificial saliva. Basal diet (9.6 g DM) used in RUSITEC consisted of (DM) 6.40 g Timothy hay, 1.86 g crushed corn and 1.34 g soybean meal. The food for the fermentation vessel was provided in nylon bags, which were gently agitated in the liquid phase. The experiment lasted for 17 d with all the samples taken during the last 5 d. Treatments were allocated at random to four vessels each and were (1) two temperature levels of $39^{\circ}C$ and $41^{\circ}C$ (2) two pH levels of 6.0 and 7.0. The total diet contained ($g\;kg^{-1}$ DM) 957 OM, 115 CP and $167MJ\;kg^{-1}$ (DM) GE. Although increase in temperature from $39^{\circ}C$ to $41^{\circ}C$ reduced degradation of major nutrients in vitro, it was non-significant. Interaction effect of temperature with pH also reflected a similar trend. However, pH showed a significant (p<0.05) negative effect on the degradability of all the nutrients in vitro. Altering the in vitro pH from 7 to 6 caused marked reduction in DMD from 60.2 to 41.8, CPD from 76.3 to 55.3 and GED from 55.3 to 35.1, respectively. Low pH (6) depressed total VFA production (61.9 vs. 34.9 mM) as well as acetate to propionate ratio in vitro (from 2.0 to 1.5) when compared to pH 7. Compared to pH 7, total gas production decreased from 1,841 ml to 1,148 ml at pH 6, $CO_2$ and $CH_4$ production also reduced from 639 to 260 ml and 138 to 45 ml, respectively. This study supported the premise that pH is one of the principal factors affecting the microbial production of volatile fatty acids and gas. Regulating the ruminal pH to increase bacterial activity may be one of the methods to optimize VFA production, reduce methane and, possibly, improve animal performance.

• 한국농림기상학회지
• /
• 제1권2호
• /
• pp.97-102
• /
• 1999

전나무(Abies holophylla)의 광도에 따른 생장량과 엽록소함량의 계절적인 변화를 관찰하기 위해서 전나무 1-1묘목을 이용하여 광도를 피음막으로 자연광 상태(1800 $\mu$㏖ m$^{-2}$ s$^{-1}$),자연광의 75%광도, 자연광의 50%광도, 자연광의 25%광도의 4가지로 조절하였다. 이들 묘목을 각각 상주대학교 묘포장에 30 cm$\times$30 cm 간격으로 100개체씩 반복하여 식재하여 수고, 근원경 생장, 물질 생산량 및 엽록소의 함량을 비교하였다. 100%자연광을 받은 전나무가 수고, 근원경 생장, 건물질 생산량 모두 가장 좋은 생장을 보였다. 전나무1-1묘목은 오히려 광도가 낮아지면 생장이 저해되는 경향을 보여 주고 있다. 엽록소 함량(a, b,총 엽록소함량)은 광도가 낮은 실험구에서 가장 좋지 않게 나타난 것으로 미루어 광도가 낮아지면 엽록소함량도 낮아진다는 것을 알 수 있다. 그러나 전나무 묘목의 피음효과에 대한 생장반응은 오랜 기간을 두고 관찰해야 하며 엽록소함량, 묘목의 생장과 밀접한 관계에 있는 광합성에 대한 연구도 있어야 할 것이다.

• 한국대기환경학회지
• /
• 제13권2호
• /
• pp.147-159
• /
• 1997

산성 건성침적은 산성비침적만큼 생태계에 중요한 영향을 미친다고 사료된다. 여러 실측소로부터 필터팩 데이터를 비교하는 과정에서 발생되는 가장 중요한 문제들 가운데 하나는 서로 다른 샘플채취 유량의 사용에 있다고 본다. 본 연구에서는 다양한 시료채취 조건이 비교되었는 바, 시료채취 유량의 변화(1.5 $\sim$ 10sLpm)가 건성침적물의 농도측정에 어떠한 영향을 주는 지를 평가하기 위해 밀도 있는 연구가 이루어졌다. 샘플링과 분석의 재현성을 결정하기 위해 한 쌍의 필터팩시료가 동시에 채취되었다. 대기중 시료들은 또한 다양한 유량변화 조건하에서 일주일동안 동시에 채취되었는 데, 그 시료 물질들은 아황산 가스, 질산 가스, 질산염 및 황산염 분진물질들이었다. 동시 측정된 한 쌍의 필퍼팩 시료는 재현성이 있는 것으로 나타났고 언제나 거의 유사한 대기농도 값을 나타내어 주었다. 결론적으로 대기중 산성 건성침적물들의 채취를 위한 유량변화는 그 물질들의 농도측정에 거의 영향을 주지 않는 것으로 나타났다. 그러나, 상대적으로 낮은 유량 (<5 sLpm)과 높은 유량만 (>5 sLpm)을 비교하였을 때에는, 높은 유량의 경우에 오차의 도입소지가 높다는 것을 알 수 있었다. 또한, 필터물질 자체만을 고려해 볼 때, 시료 유입량의 증가에 따라 나일론 필터에 흡착된 아황산가스의 양은 상당히 감소되는 것으로 나타났다.