• Asian-Australasian Journal of Animal Sciences
• /
• 제6권2호
• /
• pp.197-203
• /
• 1993

The protection of dry matter and nitrogen from rumen degradation of dhaincha seed (Sesbania aculeate) meal was studied using nylon bag technique. The dhaincha seed meal was subjected to various heat treatments that included oven drying, autoclaving and boiling. Similar experiment was conducted with fish meal as reference for comparison. The oven-dried dhaincha meal was found to retain more dry matter and nitrogen than was found boiled or autoclaved meal. While autoclaving appeared to improve nitrogen and dry matter retention to some extent, boiling seemed to cause more loss of dry matter from nylon bag. Heat treatment caused high retention of nitrogen by fish meal. The calculated effective protein degradation was 80.4% and 83.2% for the oven dried fish meal and dhaincha seed meal whereas same values were 74.2% and 86.7% for autoclaved fish and dhaincha seed meal respectively at the outflow rate of 4.4% per hour. The in vitro study revealed higher digestibility for heat treated samples by pepsin. The dry matter, nitrogen and ash content of dhaincha seed meal were 85.93%, 5.93% and 7.31% respectively.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.13-19
• /
• 1995

Spin finish(SF) for nylon filament was prepared. The influence on the properties of filament obtained by treating the prepared spin finish in this study(SF-2) and foreign-made spin finish(Spinnar N-100) was compared. SF-2 prepared by blending of spindle oil 70g, paraffin wax 10g, glyceryl mono-oleate 5g, POE(6) nonylphenyl ether 4g, POE(10) nonylphenyl ether 4g, POE(10) octylphenyl ether 2g, POE(14) mono-oleate 4g and water 1g was excellent in its characteristics. Some of the properties of Nylon filament treated with SF-2 were better than those treated with Spinnar N-100. Also, optimal physical conditions of nylon filament according to the number of revolution of oil roller were obtained at conditions of 5rpm of number of revolution oil roller, 1.25% of SF-2 oil pick up, and denier 69D.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• 복식
• /
• 제54권6호
• /
• pp.141-148
• /
• 2004

This study examines the dyeability of fabrics in relation to dyeing temperature, time, concentration, and the number of repeated dyeings. For this study, at first we extracted natural dyes from the peel of C.umshiu mandarin, which is fast as a dye and considered as recycling agricultural wastes. Additionally, it represents the image of Jeju Island. Then, we dyed cotton, wool, silk and nylon fabrics with the extracted dyes. The findings of this study are as follows. 1) Dyed cotton, wool, silk and nylon fabrics with the extract of C.umshiu mandarin peel are generally yellow. 2) Wool, nylon, silk, and cotton, in this order, are of good dyeability; Wool fabrics have the highest dyeability and cotton fabrics have the lowest. The dyeabilty of cotton fabrics was not improved even after dyeing in different conditions. 3) Colorfastness with washing, rubbing and perspiration are all good, while colorfastness with light is poor. 4) Higher dyeing concentration makes better dyeability. 5) Dyeability is enhanced as the dyeing temperature increases, while the dyeability of silk and nylon is relatively good even at low temperatures. 6) Looking at dyeability according to dyeing time, the longer the dyeing time, the better the dyeablility. Sixty minutes of dyeing time is appropriate to dye fabrics. 7) With an increase in the number of repeated dyeings, increased dyeability is obtaihed.

• 한국식품저장유통학회지
• /
• 제15권6호
• /
• pp.804-809
• /
• 2008

울릉미역취의 저장기간 연장을 위한 MAP기술을 개발하기 위하여, 포장재질과 저장온도가 품질 특성에 미치는 영향을 조사하였다. 울릉미역취를 6월경에 수확하여 $30\;{\mu}m$ PP, $30\;{\mu}m$ Antifogging-OPP, $30\;{\mu}m$ LDPE, $18\;{\mu}m$ Macroperforated-HDPE, $60\;{\mu}m$ Nylon/PE, $85\;{\mu}m$ PVC/PE 재질의 필름으로 밀봉포장하고 4, 10, $20^{\circ}C$에서 저장하면서 포장내의 기체 농도와 품질 특성을 분석하였다. 저장온도 $10^{\circ}C$에서 포장 내의 산소 농도를 비교해보면 PP와 A-OPP 포장구는 $9{\sim}10%$, LDPE 포장구는 $12{\sim}16%$, Nylon/PE와 PVC/PE 포장구는 2%를 각각 유지하였다. 포장 내의 이산화탄소 농도는 PP, A-OPP, LDPE 포장구는 5%를, Nylon/PE와 PVC/PE 포장구는 경시적으로 증가함을 보였다. 중량감소는 M-HDPE 포장구에서는 거의 억제되지 않았으나 그외 포장구에서는 강력하게 억제되었고 저장온도가 낮을수록 억제효과는 증가됨을 보였다. 가용성 고형분 함량과 pH는 $4^{\circ}C$와 $10^{\circ}C$에서는 큰 변화를 보이지 않았고 포장재질의 영향도 받지 않았으나 $20^{\circ}C$에서는 포장재질에 따라 다른 변화양상을 나타내었다. 관능적 품질 특성인 외관, 색 및 전반적 기호도가 저온과 PP 포장구에서 가장 높게 평가되었다. 이로써 울릉미역취에 적합한 MAP 조건은 포장 내를 약 10% 산소와 5% 이산화탄소로 유지할 수 있는 PP 재질과 $4^{\circ}C$ 저장인 것으로 확인되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권2호
• /
• pp.210-214
• /
• 1997

Ruminal degradation characteristics and intestinal availability of crude protein (CP) in four animal-origin feeds (fish meal, meat meal, viscera meal, feather meal) were estimated by mobile nylon bag technique. Three ruminally and duodenally cannulated Holstein dairy cows (average body wt. 550kg) fed a diet containing 40% concentrate and 60% orchard grass hay on a dry matter (DM) basis. Assuming that the outflow rate of diet in rumen is 5% per hour (k =0.05), contents of quickly degradable CP (QDP), slowly degradable CP (SDP), and undegradable CP (UDP) in the rumen were 27.6%, 9.4%, 63.0% for fish meal, 34.3% 28.1%, 37,6% for meat meal, 43.9%, 12.5%, 43.6% for viscera meal, and 14.4%, 15.8%, 69.8% for feather meal, respectively. Intestinal CP degradability was 51.0% for fish meal, 27.2% for meat meal, 37.9% for viscera meal and 56.2% for feather meal. Available UDP in the intestinal tract was contained 288 g, 217 g, 246 g and 423 g per kilogram DM of diet in fish meal, meat meal, viscera meal and feather meal, respectively.

• 한국농공학회지
• /
• 제12권2호
• /
• pp.1965-1970
• /
• 1970

The experiment was carried out in order to improve the leakage stopping work in the irrigation canal founding on the porous soil. But the experiment had many problems to be studied more owing to the insufficient time and facilities. The results obtained are summarized as follows; 1. Polyethylene film is estimated not to make strength decrease owing to buring in the subsoil, but to make owing to the sunlight. 2. Coated nylon shows the tendency to deteriorate strength when it is buried in the earth or exposed to the sun for long time, but leakage is all but impermeability generally. 3. Leakage loss rates for one hour show some differences in the canal to be full with water in accordance with operating methods, that is, the clay lining section is 12.6%, the coated nylon lining section is 1.7%, the polyethylene film lining section is 1.3%, respectively. 4. Leakage quantities per wetted perimeter unit area show $3.556cc/cm^2/hr$. in the clay lining section, $1.574cc/cm^2/hr$. in the coated nylon section, $0.695cc/cm^2/hr$. in the polyethylene film lining section, respectively. 5. When the construction fund make the clay lining section as a standard, the polyethylene film section is 92.1%, the coated nylon section is 174.2%, respectively. But, the unit cost of execution may be low when the polyethylene film and the coated nylon will enable to mass-produce for the purpose of execution.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.1-6
• /
• 2021

The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.500-514
• /
• 1996

The purpose of this study was to observe the tissue response in applying staples and various suture materials to both scalp and buccal mucosa in rabbits. 18 rabbits were divided into 6 groups. The incised wounds of both scalp and buccal mucosa were sutured with staples, polyglactin 910, chromic catgut, mer silk and nylon. The experimental animals were sacrificed after 1, 3, 5, 7, 10, 14 days posto peratively 3 animals at one time. The tissue was stained with Hematoxylin and eosin, and Masson's Trichrom. In light microscopic examinations, the sutured sites were examined histologi cally according to 6 degrees about inflammation and collagen deposit. The results were obtained as follows, 1. The chromic catgut, an absorbable suture material, was absorbed by 7 days, whereas polyglactin 910 and mersilk began to get absorbed after 7 days. 2. Mersilk manifested a broad range of inflammation in the scalp, and both staple and nylon showed a severe inflammatory reaction in the buccal mucosa. 3. With polyglactin 910, both tissue samples showed only minor foreign body reaction, however in the scalp, the process of fibrosis took place compara tively slowly, whereas in the buccal mucosa, it occurred promptly and manifested active fibrosis by 7 days. 4. Mersilk showed widespread a matrix formation in both scalp and buccal mucosa, and showed the most severe inflammatory reaction by 3 days, which did not seem to decrease even after 7 days. 5. Both staple and nylon showed relatively a severe inflammatory reaction, however fibrosis took place rather promptly compared to the other groups. 6. Generally, in the buccal mucosa fibrosis occurred more promptly than in the scalp in both control and experimental groups. 7. Retention of the suture material and stability of the knot were the best with the staple, and better stability was manifested by the multi-stranded poly glactin 910 and mersilk than singlestranded chromic catgut and nylon. From above results, in the buccal mucosa absorbable suture materials especially polyglactin 910 showed better response in the aspect of inflammatory reaction, while in the scalp monofilament suture materials such as staple and nylon manifested a early fibrosis and collagen formation.

• 복식문화연구
• /
• 제6권1호
• /
• pp.58-70
• /
• 1998

The color difference value of fabrics dyed with browning extracts from mushroom were as follows. 1. Two hours of dyeing depending on pH at 95℃ exhibited colors of YR and Y. The color of wool and nylon was darkest brown at pH 4, but light brown or yellow as pH increased. The color of silk was darkest brown at pH 5 and pH changes resulted in the same tendency as in wool. 2. In wool the color was changed to darker brown as time prolonged, however, there was no further color change after 9hr and value and chroma of wool declined. 3. At pH 4, the increase in temperature turned colors of sil, wool and nylon into dark brown from light yellow. 4. As the result of repetitive dyeing, colors of silk, wool and nylon gradually turned into darker brown. The repetitive dyeing was more effective in dark color and high colorfastness compared to a prolonged dyeing. 5. The amount of mordant resulted in color changes between light yellow and dark brown without various color changed. 6. In color change according to methods of mordant, post-mordant with CuSO₄·5H₂O and with SnCl·2H₂O showed colors of green and light yellow, respectively.