• 복식
• /
• 제58권1호
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.8-17
• /
• 2012

In order to dye nylon/cotton blended fabrics in solid colors with only acid dyes, a hetero-bifunctional bridge compound (DBDCBS) was examined. The bridge compound was designed to react only onto cotton fabrics first, on which amino-containing acid dyes react later by covalent bonding. By the effect of DBDCBS, amino-containing acid dyes exhibited high affinity toward the cotton fabrics. From the dyeing properties examined at various conditions, the optimum dyeing was decided at pH 4 and $100^{\circ}C$. Consequently, the solid color was obtained on nylon/cotton blended fabrics in one bath dyeing process using only acid dyes. The DBDCBS did not show any negative effect on nylon side in terms of dyeing and physical properties.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.743-748
• /
• 2006

본 논문에서는 연구에서는 Nylon6를 기재로 하여 두 가지 Melamine계 난연제(melamine cyanurate: MC-100 and melamine phosphate:MPP-100)를 사용한 난연 Nylon를 개발하여 난연성 및 물성평가를 수행하였다. 난연Test는 UL-94 측정방법(수직연소 시험방법)을 이용하였고, 물성평가는 만능물성시험기(UTM)를 이용하여 인장강도, 굴곡강도, 굴곡탄성율 등을 측정하였고, 충격강도 시험기를 이용하여 충격강도를 측정하였다. 또한 Nano-clay(Cloisite 30B) 5wt%를 사용하여 물성에 미치는 효과를 관찰하였다. 수지의 난연성 평가결과에 의하면, 난연제의 함량이 5wt% 이상이면 V0급을 얻을 수 있었다. 난연제 함량이 증가함에 따라 인장강도. 굴곡강도는 감소하고, 굴곡탄성율은 증가하였다. MC-100의 경우, 5wt%까지는 Nylon6의 동등 이상의 물성을 유지하였다. Nano-clay의 경우, 분산 상태가 불량하여 기대 수준의 물성 향상과 난연 효과는 얻지 못했다.

• 한국염색가공학회지
• /
• 제3권2호
• /
• pp.25-33
• /
• 1991

Poly(ethylene terephthalate)(PET) and nylon 6 films stretched uniaxially and biaxially were sputter etched in the presence of argon gas. The surface of the etched films was investigated using a scanning electron microscope(SEM). While cracks perpendicular to the stretched direction were observed in the uniaxil stretched films sputter etched for 30 min., many protrusions were formed in the biaxial stretched films at the height of 0.3-0.4 gm for PET and $0.1-0.2\mum$ for nylon 6. The tops of two or three protrusions merged etching time increased to 60 min. The contact angle to water of the sputter etched PET and nylon 6 films decreased steeply when etched for one to 3 min. In order to investigate chemical changes on the surface ESCA analysis was carried out. In both films sputter etched $C_{1s}$ intensity decreased and $O_{1s}$ intensity increased compared with the unetched ones.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.156-161
• /
• 2005

The thermal transitions of a nylon 6/layered silicate nanocomposite were studied by differential scanning calorimetry and in-situ synchrotron X-ray diffraction. The drawn film of the nylon 6/layered silicate nanocomposite typically showed three endotherms in the DSC thermogram; a very broad endotherm at $\sim120^{\circ}C(T_{1})$, a double-melting endotherm at $\sim215^{\circ}C(T_{2})$, and a high temperature endotherm at $\sim240^{\circ}C(T_{3})$. The drawn film of the nylon 6/ layered silicate nanocomposite was comprised of a mixture of the $\alpha and \gamma$ forms, with $the \alpha form$ being generated by drawing the pressed film having $the \gamma form$. The melting and crystallization of the crystals were observed at the above thermal transitions during the heating experiment performed at the Pohang X-ray synchrotron radiation source (4C2). The newly generated form was meta-stable and melted $at {\sim}T_{1}$. The double-melting $at {\sim}T_{2}$ was due to the exothermic crystallization of $the \alpha form$ during the main endothermic melting of $the \gamma form$. $The \alpha form$ crystallized $at {\sim}T_{2}$ and melted $at {\sim}T_{3}$.

• 폴리머
• /
• 제26권4호
• /
• pp.483-491
• /
• 2002

나일론 6의 상온 및 저온에서의 내충격성을 개선할 목적으로 폴리우레탄 (PU)/나일론 6 용융블렌드를 Haake Rheomix를 사용해 제조한 후 PU 함량 (10, 20, ,30, 40, 50 wt%) 및 블렌딩 시간 (5, 10, 15, 20분)에 따른 결정구조, 동역학적 특성, 인장특성 및 충격거동을 WAXD, DMA, UTM 및 notched Izod 충격시험기 등을 이용하여 조사하였다. PU 함량 및 블렌딩 시간이 증가할수록 블렌드의 결정회절피크의 형태는 넓어지고 회절피크의 강도는 감소하였다. 블렌드의 유리전이온도, 인장강도, 인장탄성률로 감소하였으며, 신도는 증가하였다. 또한 PU 함량이 블렌딩 시간보다 결정구조, 동역학적 특성 (tan $\delta$) 및 인장특성 등에 더 큰 영향을 미침을 알 수 있었다. PU/나일론 6 (10/90 wt%) 블렌드 상온 ($20^{\circ}C$) 및 저온 ($-35^{\circ}C$)에서의 충격강도가 크게 향상될 수 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.142-149
• /
• 2002

The frictional properties of nylon can be improved by the impregnation of lubricants like wax, oil or graphite. The inclusion of these lubricants, on the other hand, decreases the mechanical properties of nylon, such as tensile strength, hardness and impact strength. As an attempt to maximize frictional properties, while minimizing a decrease in the mechanical properties, various kinds of nylon containing 3 wt% wax and varying contents of oil or graphite were prepared. It was found that the synergy effects to improve both friction and anti-wear properties is evidenced by impregnating a combination of wax/oil or wax/graphite. The wear rate of a nylon containing 3 wt% of wax and 1.5 wt% of oil turned out to be 1/4 of that of nylon impregnated with 8 wt% wax or 8 wt% oil. The latter showed the lowest wear rate among the nylons prepared with a single lubricant. In addition, the friction coefficient of the developed nylon was found to be very similar to the nylon with 8 wt% wax only.

• 폴리머
• /
• 제31권4호
• /
• pp.322-328
• /
• 2007

촉매인 potassium(K)을 2회 분할 투입하는 음이온 개환중합반응으로 ${\varepsilon}-caprolactam$을 분산매인 liquid paraffin 내에서 분간 중합하여 $4{\sim}7\;{\mu}m$의 직경을 가지는 단분산된 구형의 polyamide 6 (Nylon 6) micro-particle를 제조하였다. 융착 방지제의 농도, 촉매의 양, 개시제의 양에 따라 생성된 입자 크기, 형태, 그리고 분포의 변화를 비교 분석하였다. 그 결과 개시제인 $PCl_3$의 양이 단량체의 $0.97{\sim}1.17\;wt%$일 때 약 90.6%의 수율을 얻었으며, 또한 촉매를 $1.3{\sim}1.4\;wt%$ 정도로 투입하였을 경우 가장 안정된 구형의 미세입자가 제조되고 높은 수율이 얻어짐을 알 수 있었다.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.351-356
• /
• 1999

CA 저장 사과로 제조한 신선절단 사과의 비타민 C 강화와 품질유지기간을 연장하기 위한 방법을 개발하기 위한 일환으로 신선절단 사과를 10% L-ascorbic acid 용액에 침지처리하고 0.03 mm LDPE, 0.04 mm PP 및 0.08 mm Nylon/PE(질소치환) 필름으로 포장하여 1$0^{\circ}C$에서 저장하면서 포장내 기체농도와 품질변화를 조사하였다. 저장 중 포장내 산소는 Nylon/PE 포장구에서 가장 낮게 l~3%로 유지되었고 다음으로 PP, LDPE 포장구 순이었다. 저장초기 포장내 에틸렌 농도의 증가속도는 Nylon/PE 포장구에서 가장 낮았다. 신선절단 사과의 비타민 C 함량은 241mg/100g으로 강화되었으며, 저장 중에는 저산소 조성 포장조건일수록 ascorbic acid 산화를 억제시켜서 Nylon/PE 포장구에서 가장 높게 유지되었다. 절단사과에서 갈변은 저산소 조성 포장조건일수록 억제하는 경향이었으며 LDPE, PP 및 무포장 절단사과는 저장 6일 후부터 발생되었으나 Nylon/PE 포장 절단사과는 저장 14일 후까지도 발생되지 않았다. 절단사과에서 부패와 이취는 LDPE, PP 및 무포장에서는 저장 9일 후에 인지되었으나 Nylon/PE 포장에서는 저장 14일 후까지도 인지되지 않았다. 이상의 결과에서 볼 때 장기간 CA 저장한 사과로 비타민 C 함량이 강화된 신선절단 사과의 제조가 가능하였고 이의 품질유지에 적합한 포장조건은 산소투과도가 낮은 포장재와 산소 제거 후 밀봉하는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.