The cylinder cover stud of low-speed marine diesel engine is more than just a stud. It is a large structural element occasionally weighing over 200 kg used for assembling the combustion chamber components. Therefore, to understand the structural behavior of the stud and design it safely is quite important considering a catastrophic failure which can be arisen from an inadequate use of it. In this paper, the analysis results of the structural behavior of the stud is introduced. Strain measurement results compared with FE analysis results are summarized. The results showed that 1) the stud stress increased with engine operating load, 2) the maximum stress amplitude was about 10 MPa which is far smaller than the stud's fatigue strength of 61 MPa, 3) the stress ratio is higher than 0.9 and the stud's load factor is about 20 %, and 4) about 7 % of initial pressure tightening load was reduced while changing to a nut tightened condition.
The extent of absorption and transmitance of the light that passes through some material is changed as the wavelength of the light varies, and which makdes it possible to estimate characteristics of the material. Spectrometer is a measurement system that can analyze the characteristics of material by using this principle. Its application field is so wide that it can be applied to all the arease that are concerned with analyzing materials : biological, environmental, medical and chemical area etc. This study is focused on developing precision sine drive mechanism for grating monochromator which is the most important part of the spectrometers. It is designed to be simple in struicture. It is achieved to derive basic principles to manipu- late precision sine drive mechanism : it should be aligned with a condition that .beta. , the angle between grat- ing normal and grating rod should be the same as .gamma. , the one between moving nut's normal and sliding guide. And also, it's found that the mis-alignments of the grating and mirrors are not the main factor in guaranteeing the linearity of sine drive mechanism. Performance evaluation is achieved by a standard sample by comparing experimental results with standard values. It results in wavelength accuracy of .+-. 0.5nm and resolution of 1nm. Conclusively, it can be verified that the sine drive mechanism developed in this study is not only simple in structure, but also stable and excellent in performanes.
This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.
An attempt was made to provide valuable information to improve service quality and customer satisfaction for in-flight catering service. The customers' demographic characteristics that impact on service quality and customer satisfaction were examined for a group of customer. 474 customers who have been used the airplane within 1 year were participated in this study. Statistical analysis was performed using SAS software program (version 6.01) for descriptive analysis, factor analysis, t-test and ANOVA. The results of the study can be summarized as follows: 1. Service Quality in In-flight catering was assessed on the basis of 18 service quality attributes and 5 dimensions derived from a factor analysis. After comparing customers' perception to customers' expectation regarding in-flight service quality, the quality of dimensions for 'meals', and 'sanitation' were not showed any significant differences. However, the expectation for dimensions of 'diversity of menu', 'providing information', and 'the degree of concern to the customers' were rated significantly higher than the perception for those. 2. Among the demographic variables, age and gender had highly influences on the customers' expectation and perception regarding service quality and customer satisfaction. 3. The korean food that the customers wanted to have for in-flight meals was investigated. Among the kinds of gruel(jook), abalone gruel(jeonbok-jook), pumpkin gruel(hobak-jook), and pine-nut gruel(jat-jook) were chosen to have for in-flight korean meals. It was rated that the preferences for beef soup(sogogikook), hot spicy beef soup(youkgaejang), brown sea-weed soup(miyoukkook) were higher than others in soup group. The preferences for boiled rice with assorted mixture(bibimbab) showed the highest and beef and rice soup(seoleongtang), boiled rice with four the staple cereals(ogogbab) were preferred higher than the others in main dish group. Bulgogi was rated the most popular dish. Korean style punch with omiza(whachae), sweet rice dish(yaksik) and fried glutinous rice cake(gangjeong)showed high preferences in dissert.
Rai, Avdhesh K.;Freddy, Allen J.;Banerjee, Atanu;Kurkalang, Sillarine;Rangad, Gordon M.;Islam, Mohammad;Nongrum, Henry B.;Dkhar, Hughbert;Chatterjee, Anupam
Asian Pacific Journal of Cancer Prevention
/
제13권6호
/
pp.2629-2633
/
2012
Background: Raw betel nut (RBN) chewing is an important contributing factor for esophageal squamous cell carcinoma (ESCC), although associated genomic changes remain unclear. One difficulty in assessing the effects of exclusively RBN induced genetic alterations has been that earlier studies were performed with samples of patients commonly using tobacco and alcohol, in addition to betel-quid. Both CDKN2A (at 9p21) and Rb1 gene (at 13q14.2) are regarded as tumor suppressors involved in the development of ESCC. Therefore, the present study aimed to verify the RBN's ability to induce ESCC and assess the involvement of CDKN2A and Rb1 genes. Methods: A panel of dinucelotide polymorphic markers were chosen for loss of heterozygosity studies in 93 samples of which 34 were collected from patients with only RBN-chewing habit. Promoter hypermethylation was also investigated. Results: Loss in microsatellite markers D9S1748 and D9S1749, located close to exon $1{\beta}$ of CDKN2A/ARF gene at 9p21, was noted in 40% ESCC samples with the habit of RBN-chewing alone. Involvement of a novel site in the 9p23 region was also observed. Promoter hypermethylation of CDKN2A gene in the samples with the habit of only RBN-chewing alone was significantly higher (p=0.01) than Rb1 gene, also from the samples having the habit of use both RBN and tobacco (p=0.047). Conclusions: The data indicate that the disruption of 9p21 where CDKN2A gene resides, is the most frequent critical genetic event in RBN-associated carcinogenesis. The involvement of 9p23 as well as 13q14.2 could be required in later stages in RBN-mediated carcinogenesis.
Background: Public awareness/knowledge on oral and pharyngeal cancer (OPC), potentially malignant disorders (PMODs) and their risk factors is crucial for prevention and early detection of OPC and PMODs. Yet, there are no published data available on the awareness and knowledge of OPC and PMODs among people living in Far North Queensland, Australia. Materials and Methods: This study was conducted as a cross sectional survey. A self-administered questionnaire was designed and consisted of relevant questions to ascertain socio-demographic information, awareness and knowledge of OPC, PMODs and risk factors and questions on participant's exposure to risk factors and dietary history were also included. Survey was carried out at the Dental Clinic of the James Cook University School of Dentistry (JCU Dental), Cairns, Australia. Subjects above the age of 20 years (n=366) were randomly selected during the period from 31st July to 6th September 2013 and questionnaire was distributed to complete while they are waiting for treatment. Data analysis was carried out using SPSS version 21 and the chi -squared test was employed to compare groups. P<0.05 was considered statistically significant. Results: The study revealed that 52.3% of the respondents were aware of the existence of OPC but only 19.0% were aware of PMODs. Of those who were aware of oral cancer, 92% agreed or strongly agreed that smoking is a strong risk factor for OPC. Similarly a relatively high proportion of the respondents agreed or strongly agreed that tobacco chewing (84%), tobacco chewing with areca nut (68%), chewing areca nut alone (51%) and exposure to actinic radiation (71%) as risk factors. However, the results for alcohol intake, age, and HPV infection were found to be relatively poor with proportions 33%, 34%, and 23% respectively. Conclusions: This study revealed an alarming lack of awareness and knowledge of OPC and PMODs.
The Korean diet, including breakfast, is becoming more Western, which could increase the risk of metabolic syndrome. Our aim was to assess whether breakfast patterns are associated with risk for metabolic syndrome in Korean adults. The study subjects (n=371; 103 men, 268 women) were employees of Jaesang Hospital in Korea and their acquaintances, and all subjects were between 30 and 50 years old. The data collected from each subject included anthropometric measurements, three-day food intake, blood pressure (BP) and blood analyses. The three breakfast patterns identified by factor analysis were "Rice, Kimchi and Vegetables", "Potatoes, Fruits and Nuts" and "Eggs, Breads and Processed meat". The "Rice, Kimchi and Vegetables" pattern scores were positively correlated with systolic (SBP) and diastolic blood pressure (DBP) measurements in men (P<0.05) and with serum triglyceride (TG) levels in women (P<0.05). The "Eggs, Breads and Processed meat" pattern scores correlated positively with weight, body mass index (P<0.05) and serum TGs (P<0.01) in men. The "Potatoes, Fruits and Nuts" pattern was associated with lower risk of elevated BP (OR 0.49, 95% CI 0.28-0.88) and fasting glucose levels (OR 0.51, 95% CI 0.26-1.00). In contrast, the "Eggs, Breads and Processed meat" pattern was associated with increased risk of elevated TGs (OR 2.06, 95% CI 1.06-3.98). Our results indicate that reducing the consumption of eggs, western grains and processed meat while increasing fruit, nut and vegetable intake for breakfast could have beneficial effects on decreasing metabolic syndrome risk in Korean adults.
강도활용을 극대화한 볼트의 소성역체결시 볼트의 항복은 볼트에 발생한 인장응력과 너트 나사산과의 접촉면에서 오는 마찰토오크에 의한 전단응력과의 조합에 의한 영향을 받는다. 볼트는 최소단면적인 나사부중 너트와 물리지 않은 여우나사부에서 먼저 항복을 일으킨다. 볼트재료는 대체로 항복과 더불어 소성경화를 보이며 그 정도는 고강도재료에서 인장강도의 10%정도이다. 본 연구에서는 소성역체결시의 거동해석을 변형도증분이론에 의거 해석하였다. 항복은 최소단명이 원통의 표면에서 시작되며 이를 두께가 얇은 원통으로 취급하였다. 항복의 전파는 이들 얇은 원통이 체결이 진행됨에 따라 순차적으로 항복에 이르는 것으로 보고 이 얇은 원통들을 항복시키는데 필요한 축력과 토오크를 합하여 체결종료시의 볼트축력과 (나사면마찰) 토오크로 하였다. M10미터 가는 나사를 계산과 실험에 사용하였다. 축력과 마찰토오크의 마찰계수에 대한 변화관계를 보여주는 그래프와 더불어 실험에서 사용한 볼트의 설계보조 선도를 제시하였다. 이 설계보조용 선도는 실험실에서 얻어진 토오크계수와 마찰계수와의 관계를 그린 것으로 윤활, 포면처리등 현장조건에 따라 달라진 마찰계수를 적절히 취급하는데 효과적으로 활용이 가능하다.
Dong-Wook Hwang;Sanjay Kumar;Dong-Hun Ha;Su-Min Jo;Yun-Hae Kim
Composites Research
/
제36권4호
/
pp.259-263
/
2023
This study investigated the open hole tensile (OHT) properties of carbon fiber/epoxy composites and compared them to bolt joint tensile (BJT) properties. The net nominal modulus and strength (1376 MPa) were found to be higher than the gross nominal strength (1041 MPa), likely due to increasing hole size. The OHT and BJT specimens exhibited similar stiffness, as expected without bolt rotation causing secondary bending. OHT specimens experienced a sharp drop in stress indicating unstable crack propagation, delamination, and catastrophic failure. BJT specimens failed through shear out on the bolt side and bearing failure on the nut side, involving fiber kinking, matrix splitting, and delamination, resulting in lower strength compared to OHT specimens. The strength retention of carbon fiber/epoxy composites with open holes was 66%. Delamination initiation at the hole's edge caused a reduction in the stress concentration factor. Filling the hole with a bolt suppressed this relieving mechanism, leading to lower strength in BJT specimens compared to OHT specimens. Bolt joint efficiency was calculated as 15%. The reduction in strength in bolted joints was attributed to fiber-matrix splitting and delamination, aligning with Hart Smith's bolted joint efficiency diagram. These findings contribute to materials selection and structural reliability estimation for carbon fiber/epoxy composites. They highlight the behavior of open hole and bolt joint configurations under tensile loading, providing valuable insights for engineering applications.
Background: To investigate polymorphisms in heat shock proteins A1B and A1L (HOM) and associated risk of oesophageal carcinoma in Northeast India. Materials and Methods: The study includes oesophageal cancer (ECA) patients attending general outpatient department (OPD) and endoscopic unit of Gauhati Medical College. Patients were diagnosed based on endoscopic and histopathological findings. Genomic DNA was typed for HSPA1B1267 and HSPA1L2437 SNPs using the polymerase chain reaction with restriction fragment length polymorphisms. Results: A total of 78 cases and 100 age-sex matched healthy controls were included in the study with a male: female ratio of 5:3 and a mean age of $61.4{\pm}8.5years$. Clinico-pathological evaluation showed 84% had squamous cell carcinoma and 16% were adenocarcinoma. Dysphagia grades 4 (43.5%) and 5 (37.1%) were observed by endoscopic and hispathological evaluation. The frequency of genomic variation of A1B from wild type A/A to heterozygous A/G and mutant G/G showed a positive association [chi sq=19.9, p=<0.05] and the allelic frequency also showed a significant correlation [chi sq=10.3, with cases vs. controls, OR=0.32, $p{\leq}0.05$]. The genomic variation of A1L from wild T/T to heterozygous T/C and mutant C/C were found positively associated [chi sq=7.02, p<0.05] with development of ECA. While analyzing the allelic frequency, there was no significant association [chi sq=3.19, OR=0.49, p=0.07]. Among all the risk factors, betel quid [OR=9.79, Chi square=35.0, p<0.05], tobacco [OR=2.95, chi square=10.6, p<0.05], smoking [OR=3.23, chi square=10.1, p<0.05] demonstrated significant differences between consumers vs. non consumers regarding EC development. Alcohol did not show any significant association [OR=1.34, chi square=0.69, p=0.4] independently. Conclusions: It can be concluded that the present study provides marked evidence that polymorphisms of HSP70 A1B and HSP70 A1L genes are associated with the development of ECA in a population in Northeast India, A1B having a stronger influence. Betel quid consumption was found to be a highly significant risk factor, followed by smoking and tobacco chewing. Although alcohol was not a potent risk factor independently, alcohol consumption along with tobacco, smoking and betel nut was found to contribute to development of ECA.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.