• 제목/요약/키워드: nut

검색결과 539건 처리시간 0.021초

견과류로부터 효율적인 DNA 추출 방법 비교 (Comparison of methods of DNA extraction from tree nuts)

  • 서승만;박샛별;김미주;김해영
    • 한국식품과학회지
    • /
    • 제50권4호
    • /
    • pp.357-361
    • /
    • 2018
  • 본 연구에서는 견과류로부터 식품 분석에 사용될 DNA를 4가지 방법으로 추출하고 그 효율을 비교하였다. 동일한 양의 시료를 사용하여 추출된 DNA의 양은 CTAB법이 가장 우수한 것으로 확인되었지만, 추출 시간이 수배이상 오래 걸리고 유기용매를 사용한다는 한계점이 있다. 다른 방법들과 DNA 추출 양의 차이가 큰 잣, 캐슈너트, 피스타치오 너트, 땅콩의 시료는 CTAB법이 가장 효율적인 방법으로 판단되며, 호두, 헤이즐넛, 아몬드의 시료는 변형 CTAB법과 실리카 막법이 CTAB법을 대체할 수 있을 것으로 판단된다. 추출된 DNA를 식물 내재유전자 및 각 견과류에 특이적인 유전자를 사용하여 PCR을 진행하였으며, 모든 추출 방법에서 DNA가 정상적으로 증폭되는 것을 확인하였다.

스프링클러설비용 CPVC관과 신축배관 접속부분에서의 누수저감 대책에 관한 연구 (Leakage-reduction Measures at a Joint between CPVC Piping for a Sprinkler System and a Pipe Expansion)

  • 임춘기;임윤택;백은선
    • 한국화재소방학회논문지
    • /
    • 제29권3호
    • /
    • pp.21-30
    • /
    • 2015
  • 본 연구는 스프링클러설비용 CPVC관과 신축배관 접속부분에서의 누수저감을 위하여 신축배관을 연결하기 위한 밸브소켓과 신축배관 너트부분에 삽입되는 수밀 고무패킹 재질에 대한 국내 및 국외 관련 규격의 검토와 관련 시험 등을 통해 대책을 제안하고자 한다. 누수시험을 통해 밸브소켓 재질은 신축배관 너트부분이 금속제인 경우 금속제로 사용하거나 신축배관 너트부분의 재질을 합성수지제로 사용하여야함을 알 수 있었다. 또한 밸브소켓의 적정 품질 확보를 위해서는 나사산 규격과 검사기준으로 KS B 0221(관용평행나사)와 나사산 검사규격을 KS B 5223(관용 평행나사 게이지)에 따르도록 관련 기준을 개정할 필요가 있다. 그리고 신축배관 너트부분에 설치되는 수밀용 고무링 소재에 대해 세부적인 기준이 없어 NBR과 EPDM 소재가 함께 사용되고 있으나 수밀성이 우수한 EPDM 소재가 사용되도록 관련 기준을 개정할 필요가 있다.

Cool Roof 성능을 확보한 Honey Comb Panel 지붕 접합부의 인발 성능 평가 (Evaluation of Pull-Out Strength of Connections with Roof Cladding using Honey Comb Panel Secured Cool Roof Performance)

  • 이인호;박상우;고광일;정미자;이은택
    • 한국강구조학회 논문집
    • /
    • 제28권3호
    • /
    • pp.139-149
    • /
    • 2016
  • 건물의 지붕 외장재는 강한 풍압 또는 태풍으로 인한 부압으로 지붕 외장재와 지붕 골조 간에 접합철물인 스크류가 인발되어 지붕외장재의 박리, 비산을 초래함으로써 인명, 재산적 피해가 발생함으로서 스크류 인발에 대한 대책이 요구되고 있다. 본 연구에서는 '인서트 너트'라는 철물을 지붕외장재가 설치되는 프레임에 체결하여 스크류의 관통 깊이를 증가시켜 인발 저항력을 높였으며 시험편 인장실험을 통한 단순 스크류 접합과 인서트 너트 접합의 인발 강도를 비교하였고 Solid Work를 이용한 모델링 해석을 통해 실제 사용되는 지붕외장재와 동일한 조건의 실험체를 제작하여 정적실험 및 가상의 풍하중을 이용한 동적실험을 통해 일반적인 스크류 접합 지붕외장재와 인서트 너트를 사용한 지붕외장재를 비교하였다.

극한 상태에서 A490 고장력 볼트 세트의 체결 품질 연구 (The Joining Quality of High Strength Bolt, Nut and Washer Set (A490) in the Extreme Conditions)

  • 석한길;조인습;홍현선
    • 한국표면공학회지
    • /
    • 제44권1호
    • /
    • pp.21-25
    • /
    • 2011
  • This test focuses on the correlation between the lubrication, ductility and strength through the change of nut lubricant which decides joining angle for A490 bolt sets required in the AASHTO (American Association of State Highway & Transportation Officials). Because the lubrication of high tension bolt, nut, washer sets becomes an important factor to ductility and joining load, the quality improvement is required for improving reliability and securing enough lubrication of maker and user. This study examines the quality characteristics required in the specification through tests because only this standard specifies joining quality in the extreme conditions (as much about two times of the joining angle on site as normal condition). Moreover, this study is limited to the test on joining axial force required in the AASHTO for the three nut lubrication conditions of A490 bolt set. It is concluded that the nuts should be coated or waxed enough for the improvement of the joining axial force and ductility of bolts required in the standards. It is shown that in the case of plain high tension bolt sets, a rust preventing lubricative oil shall be applied and the torque coefficient value for A490 bolt sets should be maintained below 0.175.

고력볼트 길이에 따른 체결 특성 평가 (An Evaluation of Clamping Characteristics for High Strength Bolts with Variable Bolt Lengths)

  • 이강민;김강석;나환선;이현주;오경환
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권6호
    • /
    • pp.127-134
    • /
    • 2011
  • 고력볼트 길이-직경비가 5d 이상인 경우, 시험을 통한 결과를 활용하여 현장에서 볼트 체결을 하도록 권고하고 있을뿐 길이-직경비에 따른 별도의 규정 및 지침은 없다. 국내에서는 고력볼트 체결법으로 너트회전법이 아닌 토크관리법이 적용하고 있고 최근에는 KS B 2819의 '구조물용 토크-전단형 고장력 볼트'(이하, TS 고력볼트)가 주로 사용되고 있기 때문에 길이 인자에 따른 규정이 국외 기준에 비해 미비한 것이 현실이다. 따라서, 본 논문에서는 TS 고력볼트의 길이인자에 따른 적정 축력 도입을 위한 소요 너트회전각 및 토크를 분석하여 길이변수에 따른 특성을 평가하고자 한다. 실험결과의 분석에서는 통계분석 프로그램 Minitab을 활용하여 길이변수에 대한 유효성을 정량적으로 분석했다.

Gallotannins from Nut Shell Extractives of Camellia oleifera

  • HE, Yi-Chang;WU, Mei-Jie;LEI, Xiao-Lin;YANG, Jie-Fang;GAO, Wei;BAE, Young-Soo;KIM, Tae-Hee;CHOI, Sun-Eun;LI, Bao-Tong
    • Journal of the Korean Wood Science and Technology
    • /
    • 제49권3호
    • /
    • pp.267-273
    • /
    • 2021
  • Camellia nut shell was collected, dried at room temperature and ground to get fine powder. The powder was extracted three times with 95% EtOH, combined, evaporated, and then freeze dried. The crude powder was dissolved in H2O and then sequentially fractionated with n-hexane, CH2Cl2, EtOAc and n-BuOH. A part of EtOAc fraction was chromatographed on a silica gel and on a Sephadex LH-20 columns using MeOH, aqueous MeOH, EtOAc-n-hexane and EtOH-n-hexane to isolate gallotannins. Three gallotannins, 1,2-di-O-galloyl-β-D-glucopyranoside (2), 1,2,6-tri-O-galloyl-β-D-glucopyranoside (3) and 1,2,3,6-tetra-O-galloyl-β-D-glucopyranoside (4), including gallic acid (1), were isolated and elucidated by NMR and Mass spectroscopies. Although nothing new, these gallotannins were first reported from the nut shell extractives of camellia tree (Camellia oleifera C. Abel). This study was to investigate the chemical constituents, especially hydrolysable tannins, of nut shell extractives of Camellia oleifera and to provide basic information for the future chemical utilization of this species.

파이로테크닉 분리 너트 내부 분할 너트 체결 특성에 대한 틈새의 영향 (Effect of Clearance on Clamping Characteristics of Segmented Nuts in Pyrotechnic Separation Nut)

  • 우정민;강다훈;최재영;김정호;조진연;장승교;양희원
    • 한국항공우주학회지
    • /
    • 제46권12호
    • /
    • pp.994-1003
    • /
    • 2018
  • 유한요소 해석을 이용하여 분할 너트를 이용하는 파이로테크닉 분리 너트의 체결부 특성을 파악하였다. 분할 너트를 이용하는 경우, 체결 과정에서 분할 너트가 반경 방향으로 벌어지는 것을 막기 위해 구속해주는 구속원통이 필수적이다. 이때, 제작 과정에서 공차로 인해 분할 너트의 외경과 구속원통 내경 사이에 발생하는 틈새의 영향을 파악하기 위하여 적절한 유한요소 볼트 체결 모델링 기법을 연구하였으며, 틈새가 0.00, 0.03, 0.06, 0.10 mm인 모델을 만들어 해석 결과를 검토하였다. 해석 결과를 통해 너트의 분할 여부 및 틈새 크기에 따라 달라지는 체결부의 특성을 확인하였으며 이로부터 신뢰성 있는 파이로테크닉 분리 너트 설계를 위해 고려해야 할 사항을 파악하였다.

디지털 화상처리를 이용한 차축 Casing Nut 용접부 치수 검사 프로그램 개발에 관한 연구 (A study on the development of dimension inspect Program for the vehicle axle casing nut welding part using digital image processing)

  • 김재열
    • 한국생산제조학회지
    • /
    • 제9권5호
    • /
    • pp.135-143
    • /
    • 2000
  • The vision system is easy to use the exclusive use as a independent computer system but it is not much popularization by reason of expensive and difficult to adapt to the various fields, because it is easy to the existed computer system, the price is cheap and also it can use to the various measurement purpose which user wanted and programed. The measurement method of the vehicle axle casing nut welding part is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual length of the standard specimen and the length of image, to measure the ratio between the actual product and the camera image. A defect is found by the assembled visual inspection system. The inspection algorithm which estimates the quality of welded product is developed and also, the software program which processes the automatic test function of the inspection system. We make the foundation of the inspection automatic system and we will help to apply other welding machine.

  • PDF

고려시대의 원예식품류에 관한 연구 (A Study on Horticulture Foods in Kory$\v{o}$ Era)

  • 강춘기
    • 한국식품영양학회지
    • /
    • 제3권1호
    • /
    • pp.69-79
    • /
    • 1990
  • Koryo(918-1352) made a certain progress in her culture and agriculture except the latter part of the era when the development in social economy were retarded due to military dictatorship and Mongol invasion. Despite of these external conditions, cultivations and kinds of horticulture foods were expanded With the help Of many king's agriculture first policy and the advancement in cultivating method . Among the horticulture foods, fruits such as peach, plum, Japanese apricot, apricot, cherry, pear, persimmon, pomegranate, crab apple, Jujube, grape, Chinese quince, walnut, orange, yuzu, chestnut, ginkgo nut(silvernut), pine nut, nutmeg nut, and fiat were crowed, and vegetables such as Chinese cabbage, turnip, radish, garlic, welsh onion, gynmigit, scallion, taro, malva, cucumber, white gourd, bottle gourd, water melon, eggplant, Japanese ginger, ginger and litchi were cultivated, while semi, water shieled and bamboo sprouts were taken in natural. Fruits were taken in natural or through dry, and particularly grapes were used to make wine, Flowers of Japanese apricots, some fruit trees, and chrysanthemum were also made into wine. Certain fruits were used as medicine owing to its medicinal nature. Vegetables were used to make Kimchi or to boil soup, sometimes they were dried to be kept in storage to be used in rare season and also used as medicine Increase in kinds of horticulture foods does not have any direct relation with the reform of social economy, but the fact that so many kinds of horticulture foods were cultivated and used in Koryo era shows that they elevated people's life and dietary culture.

  • PDF

들깨와 잣이 흰쥐의 혈액 성분에 미치는 영향 (The Effects of Perilla and Pine Nut on Blood Components in Rats)

  • Jho, Hu Jhong
    • 한국환경보건학회지
    • /
    • 제10권1호
    • /
    • pp.99-106
    • /
    • 1984
  • The diets used to this experiment were composed only of stock diet for group A, a mixture of stock diet and 2% cholesterol for group B, and 5%, 10% perilia powder for group C, D and 5%, 10% pine nut for group E, F in addition to group B diet respectively. All groups fed with these experimental diets for 3 weeks were fasted for 15 hours at the end of the experiment, and then they were decapitated to take serum. The serum was used to measure the level of glucose, total cholesterol, triglyceride, HDL-cholesterol and lipoprotein composition. The results were summarized as follows. 1. Perilla and pine nut diets have no influence on body weight and food intake in cholesterolfed male rats 2. The blood glucose level was not changed significantly at groups C-F. 3. Total cholesterol level was significantly decreased by 21.6% ~ 29.7% at group C-F than at group B. 4. HDL-cholesterol level was increased by 51.3% ~ 86.1% at group C-F than at Group B. 5. The $\alpha/\beta$ ratio which is 0.51 at the group A was risen to 0.99 at the group B. However, this ratio was decreased to 0.5 0 - 0.51 at group C, D and to 0.68 - 0.69 at group E.F.

  • PDF