• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.205-210
• /
• 2006

해양구조물 설계시 급격한 파랑에 의한 충격력은 구조물 안전을 위한 중요한 설계인자이다. 이러한 충격력은 과도한 하중이 극히 짧은 시간 사이에 발생하는 현상으로 실험적 또는 수치해석적으로 해석하기 매우 어려운 문제이다. 본 연구에서는 급격한 파랑에 의한 충격력을 해석하기 위하여 수치파수조를 이용하여 N.S. 방정식에 기반한 수치해석을 수행하였다. 임의파를 선형중첩에 기반하여 조파기를 작동시켜 재현하였고 다블록격자하에서 수직실린더에 작용하는 충격력을 수치해석하였다. 한편 자유표면은 V.O.F. 및 local height function을 이용하여 추적하였다. 수치해석 검증을 위하여 수치해석 및 실험 결과와 비교를 수행하였는데 비교적 만족할 수 있는 결과를 확인하였으나 해양구조물 설계시 유용한 결과를 얻기 위해서는 쇄파와 같은 극한파 재현과 극한파에 의한 충격력에 대한 많은 연구가 지속되어야 함을 알 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제34권4호
• /
• pp.93-99
• /
• 2022

본 연구에서는 바닥 조파장치가 설치된 3차원 조파수조에서 재현된 규칙파에 대한 해석해를 유도하였다. 바닥 조파장치로 삼각형 형상, 사각형 형상 및 두 형상이 복합된 형상이 적용되었다. 선형파 이론과 움직이는 바닥에 대한 경계조건, 동역학적 및 운동학적 자유수면 경계조건을 이용하여 조파수조 내의 3차원 속도포텐셜을 유도하였다. 그리고, 이로부터 각 방향 성분의 유속과 자유수면변위에 대한 해석해를 구하였다. 유도된 해석해는 바닥 조파장치가 설치된 조파수조에서 규칙파의 전파 특성에 대해 물리적으로 타당한 결과를 보였다. 바닥 조파장치가 snake 형태로 움직이는 경우의 비스듬히 전파하는 파랑의 조파에 대해서도 해석해를 유도하였으며, 해석 결과는 이론적으로 예측한 결과와 일치하였다.

• Journal of Ship and Ocean Technology
• /
• 제6권4호
• /
• pp.13-18
• /
• 2002

Active control has been partly applied to suppress the re-reflecting waves in wave basin with plunger-type wave maker to obtain desirable waves. This limitation comes from the non-confirmable theoretical background to the control algorithm. This paper proposes control logic to overcome this drawback, based on the impulse response function for propagating waves between control input and the wave height. The performances have been verified as reasonable in practical application by comparing with the propagating wave components in numerical wave basin, using wave decomposition method. Moreover, the control logic can also give useful wave-absorbing performance after cessation of wave generation.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.23-28
• /
• 2011

In this paper, a new generation method for ship induced waves is proposed using the fully non-linear 3-D numerical model with non-reflected wave generation system (LES-WASS-3D). A ship induced wave generated by the newly proposed method is examined in comparison with that obtained by an empirical formula. It is then shown that there is a good agreement in free surface the elevation between them. As a result, it is revealed that a ship induced wave in a 3-D numerical wave field can be simulated well using LES-WASS-3D.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.38-48
• /
• 2002

파랑집중 이론에 기초하여 모형시험수조에서 다방향 극한파를 생성하는 연구를 수행하였다. 파랑의 집중도에 대한 파향 범위, 주파수 폭, 중심 주파수 등의 영향을 고찰하였다. 등파고와 등기 울기 스펙트럼 모델에 의한 결과를 서로 비교하였으며, Boussinesq 방정식과 유한요소법에 기초한 수치해와 이론해를 또한 서로 비교하였다. 효율적인 파랑집중을 위해서는 파향과 주파수 모두를 효과적으로 제어하는 것이 필수적이다. 파랑집중도는 중심주파수 보다는 주파수 폭에 좌우되며, 동일한 조건하에서 두 스펙트럼 모델은 동등한 정도의 파랑집중 효율을 나타낸다.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.89-95
• /
• 2022

The stability of the existing ships has been evaluated through numerical calculations in the steady-state, but recently the IMO proposed a new stability assessment criteria that the stability is evaluated in the state in which environmental loads from such as waves and wind act like the loads under actual ship operating conditions. In this study, IMO 2nd generation stability assessment method and procedure were summarized for the dead ship condition, and Direct Stability Assessment (DSA) was performed on 13K chemical tanker through basin model test. The model test is performed in the ocean engineering basin to implement wave and wind loads, and environmental conditions for waves were set height and period of the incident wave, considering the regular wave and wind generation range reproducible in the ocean engineering basin. In addition, to consider the effect of wind speed, the Beaufort Scale for wind speed was applied in the model test.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2004

In this paper, the performance of a wave absorbing system using an inclined punching plate, was investigated. Using the multi-domain boundary element method (BEM), the reflection coefficients of an inclined punching plate were tested with various design parameters, such as inclined angle, porosity, and wave frequencies. To confirm the numerical solutions, the systematic model test was conducted at 2-D tank and square tank. The numerical results were in good agreement with the experimental results within the entire frequency range. It was found that an inclined punching plate had an excellent wave absorbing efficiency, compared to a horizontal one. Also, the optimal range of an inclined angle had an excellent wave absorbing efficiency, compared to a horizontal one the optimal range of the inclined angle is 10°<β<20°. The developed wave absorber was installed at KRISO's square basin, and is working effectively for various model tests.

• Ocean Systems Engineering
• /
• 제13권3호
• /
• pp.225-245
• /
• 2023

In the present paper, a numerical and experimental analysis for a wave energy converter under extreme environmental conditions is carried out. After the definition of design waves, including a 100-year return period stochastic sea state and a deterministic rogue wave condition, a numerical analysis using potential theory and a RANS equations solver are compared with experiments carried out at the Seakeeping Basin at the Technical University of Berlin. Results are discussed with special emphasis on the limits of potential theory methods for the evaluation of extreme wave conditions and the use of the presented methodology for early design stages.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.212-219
• /
• 2005

Real sea waves in a towing wave basin have been generated using random periodic motion of the segmented wave makers and the wave reflections of sidewalls. Theoretically, the real sea waves can be described by the superposition of many random oblique waves. This paper introduces numerical real sea wave generation in a rectangular wave basin using spectral method that uses a superposition of orthogonal functions which have to satisfy the Laplace equation. Oblique regular waves, long crested irregular waves and real sea waves were simulated and met the requirement of sidewall wave reflection and wave absorption. MLM (Maximum Likelihood Method) and Spatial Fourier Transform were used in order to obtain propagated wave direction characteristics. The estimated results proved the usefulness of the method and the performances showed reasonable directional patterns comparing with generating patterns.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.183-195
• /
• 2022

Under the effects of the near-field earthquakes, the incident angle of the incoming wave could be different. In this study, the influences of some parameters such as incident angle, basin edge, peak ground acceleration level of the bedrock motion as well as different clay types with different consistency on the amplification behavior of the shallow basins are investigated. To attain this goal, the numerical analyses of the basins filled with three different clay types are performed using a fully nonlinear method. The two dimensional models of the basins are subjected to a set of strong ground motions with different peak ground acceleration levels and three different incident angles of 30◦, 45◦ and 90◦ with respect to the horizontal axes. The results show the dominant effect of the obliquely subjected waves at most cases. The higher effect of the 45◦ incident angle on the basin response was concluded. In the other part of this study, the spectral amplification curves of the surface points were compared. It was seen that the maximum spectral amplification of different surface points occurs at different periods. Also, it is affected by the increase in the peak acceleration level of the incoming motions.