• Journal of Ship and Ocean Technology
• /
• 제12권3호
• /
• pp.14-25
• /
• 2008

Recently, there has been a serious effort to design a wing in ground effect (WIG) craft. Vehicles of this type might use low aspect ratio wings defined as those with smaller than 3. Design and prediction techniques for fixed wings of relatively large aspect ratio are reasonably well developed. However, Aerodynamic problems related to vortex lift on wings of low aspect ratio have made it difficult to use existing techniques. In this work, we firstly focus on understanding aerodynamic characteristics of low aspect ratio wings and comparing the results from experimental measurements and currently available numerical predictions for both inviscid and viscous flows. Second, we apply an improved numerical method, "B-spline based high panel method with wake roll-up modeling", to the same problem.

• 대한설비공학회지:설비저널
• /
• 제14권4호
• /
• pp.293-299
• /
• 1985

This paper describes an economical prediction procedure for heat transfer phenomenon through a channel containing an abrupt asymmetric expansion in flow cross-seetional area. Numerical solutions for the flow field are obtained by the finite difference numerical method applied to the modified boundary layer equations. Modified boundary energy equation is used to analyze heat transfer as modified boundary momentum equation. Predictions of the method compare very favorable with exprimental data. Results of this study by modified boundary layer equation are as follows : 1. The computation time required for the scheme is at least an order of magnitude less than for the numerical solution of the full Navier-stokes and Energy eguations. 2. In laminar flow, the maximum heat transfer occurs downstream of the reattachment point.

• 소성∙가공
• /
• 제23권1호
• /
• pp.41-48
• /
• 2014

The light guide plate has become the major component for the backlight module in general information technology products (e.g. mobile phones, monitors, etc.). High speed injection molding has been adopted for thin walled LGP giving advantages such as weight, shape, size, and reduction in production costs. In the current study, the rheological characteristics of high liquidity plastic resin PC(HL8000) were measured using a capillary rheometer to improve the reliability of the numerical analysis for high speed injection molding. With the measured viscosity and PVT of PC(HL8000), numerical analysis of injection molding was conducted using the simulation software(Moldflow). Filling time and deflection were predicted and compared with those of traditional PC resins(H3000, H4000). The results show that PC(HL8000) has significantly different rheological characteristics during high speed injection molding. Hence proper properties of the resin should be used to improve the accuracy of numerical predictions.

• Nuclear Engineering and Technology
• /
• 제16권1호
• /
• pp.21-28
• /
• 1984

수치확산을 포함한 truncation오차의 줄임은 수치해석의 중요한 과제가 되어왔다. Stream line방법이 교차수치 확산과 비확산형의 truncation 오차를 제거하기 위하여 고안되었다. 또한, stream line방법과 유한 차분법이 합쳐진 2단계 stream line방법이 비압축성 난류유동의 지배 방정식을 풀기 위하여 고안되었다. 이 방법은 유한 차분법과 비교되었으며, 두 방법 모두 실험자료와 비교되었다. 그리고, 두 방법의 truncation 오차를 비교하기 위하여 truncation 오차 분석이 행해졌다

• 대기
• /
• 제33권5호
• /
• pp.457-475
• /
• 2023

Accurately predicting localized heavy rainfall is challenging without high-resolution mesoscale cloud information in the numerical model's initial field, as precipitation intensity and amount vary significantly across regions. In the Korean Peninsula, the radar observation network covers the entire country, providing high-resolution data on hydrometeors which is suitable for data assimilation (DA). During the pre-processing stage, radar reflectivity is classified into hydrometeors (e.g., rain, snow, graupel) using the background temperature field. The mixing ratio of each hydrometeor is converted and inputted into a numerical model. Moreover, assimilating saturated water vapor mixing ratio and decomposing radar radial velocity into a three-dimensional wind vector improves the atmospheric dynamic field. This study presents radar DA experiments using a numerical prediction model to enhance the wind, water vapor, and hydrometeor mixing ratio information. The impact of radar DA on precipitation prediction is analyzed separately for each radar component. Assimilating radial velocity improves the dynamic field, while assimilating hydrometeor mixing ratio reduces the spin-up period in cloud microphysical processes, simulating initial precipitation growth. Assimilating water vapor mixing ratio further captures a moist atmospheric environment, maintaining continuous growth of hydrometeors, resulting in concentrated heavy rainfall. Overall, the radar DA experiment showed a 32.78% improvement in precipitation forecast accuracy compared to experiments without DA across four cases. Further research in related fields is necessary to improve predictions of mesoscale heavy rainfall in South Korea, mitigating its impact on human life and property.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.943-953
• /
• 2021

호수, 저수지, 만 등의 사면에서 발생하는 산사태 및 토석류에 의해 유발되는 수면충격파의 전파는 복잡한 지형 조건에서 토석류와 물 흐름이 상호작용하는 3차원 자연현상이다. 이 연구에서는 3차원 다상 난류 흐름 해석을 위한 수치모형과 비뉴튼 유체인 토석류에 대한 유변학적 모형을 적용하여 만의 사면에서 발생한 산사태로 인한 수면충격파의 거동을 수치모의하였다. 수치해석 결과를 타 연구자의 수리실험 자료와 비교 분석하여 3차원 수치모형의 적용성을 평가하였다. 수면으로 유입되는 토석류의 선단부 두께와 유속이 적절히 모의 된다면, 수면충격파의 정점부가 솟구치는 높이와 수면형은 매우 우수한 정확도로 예측이 가능한 것으로 나타났다. 토석류의 초기 형상을 다르게 설정한 두 가지 수치해석 결과는 연직상향으로 솟구친 수면충격파가 최고점에 도달한 후 중력에 의해 하강하면서 감쇄되는 단계에서부터 상이해지는 것으로 나타났다. 토석류 초기 두께를 상대적으로 크게 설정한 수치모의 결과는 만을 가로지르는 수면형과 함께 반대편 사면에서의 쳐오름 현상까지 양호하게 실험자료를 재현할 수 있는 것으로 나타났다. 반대편 사면에 도달한 수면충격파가 사면을 거슬러 흐르는 최고 쳐오름 높이는 토석류 총량이 같은 경우 수면으로 유입되는 토석류의 초기 두께에 민감하지 않은 것으로 나타났다. 한편, 수로 바닥을 따라 전파되는 토석류의 전파 특성을 더 정확하게 재현하기 위해서는 실험에서 점토 성분이 없는 입자만을 이용하여 재현한 토석류 물질 특성에 맞는 유변학적 모형을 적용할 필요가 있다고 판단된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2001년도 Proceeding of KIN-CIN Joint Symposium 2001 on Satellite Navigation/AIS, lntelligence , Computer Based Marine Simulation System and VDR
• /
• pp.89-99
• /
• 2001

Optimum Ship Routing can be defined as “The selection of an optimum track for a transoceanic crossing by the application of long-range predictions of wind, waves and currents to the knowledge of how the routed vessel reacts to these variables”. This paper treats the methodology how to serve optimum ship routing problem by network modeling and reveals the validity of the network model by some numerical experiments.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.467-470
• /
• 1999

An analytical method based on the nonlinear layered finite element method is developed to simulate overall load-deflection behavior of bonded and unbonded prestressed concrete beams. The model which uses rather advanced numerical technique for iterative convergence to equilibrium can be regarded as superior one compared to the models mainly based on either load control or displacement control methods. Model predictions were compared with preceding experimental results and it was observed that there were good agreements between them.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1990년도 PROCEEDINGS OF THE FIRST KOREA-JAPAN JOINT GEOTECHNICAL SEMINAR ON EXCAVATION and TUNNELING IN URBAN AREAS
• /
• pp.163-175
• /
• 1990

A main factor in the design of excavation in an urban area is the movements. The finite element method provides rational predictions of excavation behaviour, yet practical engineers may find difficulties in applying it to the actual field case. In this study, factors affecting the excavation behaviour are considered in details and the applicability of the finite element method to the actual field excavation cases is presented. Numerical examples are analyzed to provide results of parametric study on the affecting factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.42.2-42
• /
• 2002

We discuss a neural network solver for the inverse optimization problem. The problem is that find functional relations between input and output data, which are include defects. Finding the relations, predictions of the defect parts are also required. The part of finding the defects in the input data is an inverse problem . We consider the meanings to solve the problem on the neural network system at first. Next, we consider the network structure of the system, the learning scheme of the network, and at last, examine the precision on the numerical calculations. In the paper, we proposed the high-precision learning method for plural three-layer neural network system that is series-connect...