• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.89-96
• /
• 2005

Numerical procedure of design optimality evaluation is studied for caisson structural systems. Two kinds of evaluation methods can be considered; mathematical optimality criteria method (MOCM) and numerical optimization method (NOM). The choice of the method depends on the available information of the system MOCM can be used only when the information of all function values, gradients and Lagrange multipliers is available, which may not be realistic in practice. Therefore, in this study, NOMs are applied for the structural optimality evaluation, where only design variables are necessary. To this end, Metropolis genetic algorithm (MGA) is advantageously used and applied for a standard optimization model of caisson composite breakwater. In the numerical example, cost and constraint functions are assumed to be changed from the orignal design situation and their effects are evaluated for optimality. From the theoretical consideration and numerical experience, it is found that the proposed optimality evaluation procedure with MGA-based NOM is efficient and practically applicable.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.183-186
• /
• 2005

We developed an upwind numerical formulation based on the eigenvalues of the approximate Jacobian matrix in order to solve the hyperbolic conservation laws governing the two-fluid two-phase flow models. We obtained eight analytic eigenvalues in the two dimensions that can be used for estimate of the wave speeds essential in constructing an upwind numerical method. Two-dimensional underwater cavitation in a flow past structural shapes or by underwater explosion can be solved using this method. We present quantitative prediction of cavitation for the water tunnel wall and airfoils that has both experimental data as well as numerical results by other numerical methods and models.

• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.312-316
• /
• 2010

Conformal mapping has been a familiar tool of science and engineering for generations. The methods of numerical mapping are usually classified into those which construct the map from standard domain such as the unit disk onto the 'problem domain', and those which construct the map in the reverse direction. We treat numerical conformal mapping from the unit disk onto the Jordan regions as the problem domain in this paper. The traditional standard methods of this type are based on Theodorsen integral equation. Wegmann's method is well known as a Newton-like efficient one for solving Theodorsen equation. An improved method for convergence by applying low frequency pass filter to the Wegmann's method was proposed. In this paper we propose an effective algorithm for numerical conformal mapping based on the improved method. This algorithm is able to determine the discrete numbers and initial values automatically in accordance with the given region and the required accuracy. This results come from analyzing the shape of given domain as seen in the Fourier Transform.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.2-4
• /
• 2010

Due to rapid progress in the performance of high-end computers, numerical prediction of fluid flow and flow-induced sound is expected to become a vital tool for aero- and hydro- dynamic design of various flow-related products. This presentation focuses on the applications of large-scale numerical simulations to complex engineering problems with a particular emphasis placed on the low-speed flows. Flow field computations are based on a large eddy simulation that directly computes all active eddies in the flow and models only those eddies responsible for energy dissipations. The sound generated from low-speed turbulent flows are computed either by direct numerical simulation or by decoupled methods, according to whether or not the feedback effects of the generated sound onto the source flow field can be neglected. Several numerical examples are presented in order to elucidate the present status of such computational methods and discussion on the future prospects will also be given.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.799-803
• /
• 1997

Smell and sound are closely connected with our life. But there is no way to represent the exact numerical value of smell. On the contary, there is a method of represent the exact numerical value of sound. In this thesis, using and adapting this method about sound, a new method of expressing the numercal value of smell is going to be derived. These two methods are similar, but there are so many substances which emit smells and the methods of measuring the density of the substances are various according to kinds of the substances. So the new method about smell will be derived by a new idea.

• 소성∙가공
• /
• 제14권3호
• /
• pp.224-232
• /
• 2005

The high-pressure die-casting is one of the most effective methods to produce a large amount of products in short cycle time. This process, however, has a problem that the gas porosity defect appears easily. The generation of gas porosity is known mainly due to the air entrapment during the injection stage. Most of numerical simulations for the molten metal flow pattern observations have done in the treating of one phase fluid flow but the gas-liquid interface is essentially multi- phase phenomenon. In this paper, the two-phase fluid flow numerical simulation methods have been adapted to predict the gas porosity generations in the molten metal. The accuracy and the usefulness of the new simulation module have been emphasized and verified through some comparison experiments.

• 한국강구조학회 논문집
• /
• 제9권3호통권32호
• /
• pp.391-400
• /
• 1997

본 연구의 목적은 콘크리트충전 각형강관 기둥의 최대내력을 산정할 수 있는 내력식을 제안하는데 있다. 내력식을 제안하기 위해서 수치해석과 실험을 통해 최대내력를 정량적으로 평가하고 기존의 한계상태설계법의 규준식에 근거하여 적절한 보정방안을 제안하여 콘크리트 충전 각형강관 기둥의 최대내력을 산정할 수 있는 내력식을 제안하고자 한다.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1014-1021
• /
• 2002

Analysis of two-dimensional secondary flows given by an oscillatory motion of a liquid with a free surface in a rectangular container subject to a linear reciprocating force is performed by numerical and experimental methods. FVM is used for the numerical computation of the two-dimensional flows. We considered the effects of the free-surface properties such as the surface tension and the dilatational viscosity. The boundary-layer analysis as well as an experiment is used in establishing the free surface properties. The secondary flow patterns are visualized by a laser sheet. It is shown that the secondary flow patterns predicted by the numerical methods are in good agreement with the experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.870-875
• /
• 2003

This paper deals with the free vibrations of horizontally curved beams with the general boundary condition, which consists of translational and rotational springs. The equations of general boundary condition of such beams are derived, while the ordinary differential equations governing free vibrations are adopted from the literature. The parabola as the curved beam's curvilinear shape is considered in numerical examples. For calculating the natural frequencies, the governing equations are solved by numerical methods. The Runge-Kutta and Determinant Search Methods are used for integrating the differential equations and for calculating the natural frequencies, respectively. for validation purpose, the numerical results obtained herein are compared to those obtained from the SAP 2000. With regard to numerical results, the relationships between frequency parameters and various beam parameters are presented in the forms of Table and figures.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.815-837
• /
• 2015

A new family of structure-dependent integration methods is developed to enhance with desired numerical damping. This family method preserves the most important advantage of the structure-dependent integration method, which can integrate unconditional stability and explicit formulation together, and thus it is very computationally efficient. In addition, its numerical damping can be continuously controlled with a parameter. Consequently, it is best suited to solving an inertia-type problem, where the unimportant high frequency responses can be suppressed or even eliminated by the favorable numerical damping while the low frequency modes can be very accurately integrated.