• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.141-142
• /
• 2014

This numerical study was carried out to optimize dual fuel combustion on natural gas-diesel in static chamber. Spray experiments conducted under conditions of premixed methan 0%, 5% and 10%. In the results, penetration decreases when premixed methane is increasing. Constants of numerical models were acquired from results of spray experiments to enhance accuracy of numerical study. And dual fuel engine simulation was implemented by using AVL-FIRE with acquired constants.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.381-388
• /
• 2001

Behavior characteristics of coil shaped elastoplastic dampers, a sort of hysteretic damper, are studied on through experiments and numerical analyses. The coil shaped elastoplastic damper shows bilinear force-deformation relationship, and no stress concentration is occurred in the device. Numerical model, which is constructed through calibration with experimental results, shows good agreement with experiment, The coil shaped elastoplastic damper has lower yielding strength and stiffness under transversal loading compared to axial leading. Additional studies are required on behavior characteristics according to configuration variation of coil shaped elastoplastic dampers.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.617-636
• /
• 2011

We present the numerical implementation, simulation, and validation of the high-velocity impact experiments that have been described in the companion article. In this part, numerical investigations and simulations performed to mimic the tests are presented. The experiments were analyzed by the explicit integration-based software ABAQUS for improved simulations. Targets were modeled with a damaged plasticity model for concrete. Computational results of residual velocity and crater dimensions yielded acceptable results.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.41-52
• /
• 2020

This paper investigates the stress-reducing preventive maintenance model through numerical experiments. The preventive maintenance model is used to analyze the relationship between related conditions and variables to gain insight into the efficient operation of the system when performing preventive maintenance in real-world situations. Various preventive maintenance models have been developed over the past decades and their complexity has increased in recent years. Increasing complexity is essential to reflect reality, but recent models can only be interpreted through numerical experiments. The stress-reducing preventive maintenance is a newly introduced preventive maintenance concept and can only be interpreted numerically due to its complexity, and has received little attention because the concept is unfamiliar. Therefore, for information purposes, this paper investigates the characteristics of the stress-reducing preventive maintenance and the relationship between parameters and variables through numerical experiments. In particular, this paper is focusing on the economic feasibility of stress-reducing preventive maintenance by observing changes in the optimal preventive maintenance period in response to changes in environmental stress and the improvement factor. As a result, when either the environmental stress or the improve effect of stress-reducing preventive maintenance is low, it is not necessary to carry out the stress-reducing preventive maintenance at excessive cost. In addition, it was found that the age reduction model is more economical than the failure rate reduction model.

• Journal of Ship and Ocean Technology
• /
• 제5권4호
• /
• pp.29-43
• /
• 2001

In this paper, free surface flows around an advancing two-dimensional rectangular cylinder piercing the free surface are studied using numerical and experimental methods. Especially, wave breaking phenomenon around the cylinder is treated in detail. A series of numerical simulations and experiments were performed for the purpose of comparison. For the numerical simulations, a finite difference method was adopted with a rectangular grid system, and the variation of the free surface was computed by the marker density method. The computational results are compared with the experiments. It is confirmed that the present numerical method is useful for the numerical simulation of nonlinear free surface waves around a piercing body.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1105-1117
• /
• 2023

In this study, the pressure drop behavior of single- and two-phase flows of air and water through the porous beds filled with uniform and non-uniform sized spherical particles was examined. The pressure drop data in the single-phase flow experiments for the uniform particle beds agreed well with the original Ergun correlation. The results from the two-phase flow experiments were analyzed using numerical results based on three types of previous models. In the experiments for the uniform particle beds, the data on the two-phase pressure drop clearly showed the effect of the flow regime transition with a variation in the gas flow rate under stagnant liquid condition. The numerical analyses indicated that the predictability of the previous models for the experimental data relied mainly on the sub-models of the flow regime transitions and interfacial drag. In the experiments for the non-uniform particle beds, the two-phase pressure loss could be predicted well with numerical calculations based on the effective particle diameter. However, the previous models failed to accurately predict the counter-current flooding limit observed in the experiments. Finally, we propose a relation of falling liquid velocity into the particle bed by gravity to appropriately simulate the CCFL phenomenon.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.49-56
• /
• 2006

In this thesis, centrifuge model experiments and numerical analyses were carried out to investigate the behavior of an excavated slope in soft clay ground. Centrifuge model tests were performed with various slopes for the excavated ground, such as 1:1.5 and 1:2. Pore pressuresthe model ground were measured to find their effects on the stability of the excavated slope. These experiments showed that the model with 1:2.5 maintained its stability within a short period of time and failed gradually. Therefore, anexcavated slope of soft soil with this slope might maintain stable conditions within a certain time. The mode1 with a 1:3 slope was observed to maintain a very stable condition, showing insignificant deformation in the ground after being excavated. Numerical analyses with PLAXIS, a commerciallyavailable software implemented with the finite element numerical technique, were performed to find the pore pressure distribution within the ground mass and the deformation of the soil. From the results of numerical analysis, a negative pore pressure was developed after the excavation and thus the stability of the slope was maintained. The safety factor for slope failure was found to decrease with time because of the dissipation of negative pore pressure with time.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.249-258
• /
• 1997

In this study, a numerical model for analyzing frost formation phenomena on a cold flat plate has been developed. Both regions of air flow and frost layer have been coupled to calculate the amount of the heat and mass transfer between air flow and frost layer. Experiments have been also conducted to validate the numerical model. The present numerical results show a good agreement with the experimental data. The present numerical model also provides some useful data such as the temperature distribution inside the frost layer which could not be obtained through the experiments.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.118-131
• /
• 1991

자유수면 근처에서의 박리유동 현상을 수치 시뮬레이션 방법과 유선 가시화 시험 방법으로 연구하였다. 수치 시뮬레이션은 물체표면에서 유기되고 확산(diffusion) 및 대류(convection)에 의해 유동중으로 박리되어 방출되는 보오티시티(vorticity)를 다수의 보오텍스로 치환하여 유동의 변화와 유체력을 구하는 보오텍스블럽 법을 사용하여 수행하였다. 이 방법으로 대규모의 와류의 생성 및 변화를 추정할 수 있으며 또한 자유수면과 와류유동의 상호간섭현상 그리고 동 유체력 등을 추정할 수 있었다. 유선 가시화 시험은 해사기술연구소의 공동수조에서 수행하였으며, 직류 전원에 의해 얻어진 수소기포를 가시화 입자로 이용하였다. 조명장치는 할로겐 램프를 이용하였고, 연속사진을 가시화의 결과로 사용하였다. 또한 자유수면의 시간적 공간적 변화를 파고계를 이용하여 계측하고 이로부터 와류유동의 변화 주기를 추정하였다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.28-35
• /
• 2013

In this paper, a research on the composition of the nesting algorithm fitness function is carried out by performing various numerical experiments to inspect how it affects the scrap efficiency, allocation characteristics, and time consumption, targeting the nesting results of ship parts. This paper specifically concentrates on a method to minimize the scrap ratio and efficiently use the well-defined remnants of a raw plate after the nesting process for the remnant nesting. Therefore, experiments for various ship parts are carried out with the weighting factor method, one of the multi-objective optimum design methods. Using various weighting factor sets, the nesting results are evaluated in accordance with the above purposes and compared with each set for each ship part groups. Consequently, it is suggested that the nesting algorithm fitness function should be constructed differently depending on the characteristics of the parts and the needs of the users.