• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.449-459
• /
• 1999

전파흡수체의 전자파산란 문제는 전송선로 근사방법과 유효매질 이론을 적용하여 매우 간단하게 표현할 수 있다. 이러한 방법은 전자장 수치해석 방법이 엄청난 계산이 필요한 것에 비해 매우 직관적이고, 간단하므로 전파흡수체 설계에 널리 사용되어져 왔다. 이 논문에서는 이러한 방법 자체가 가지는 근사의 한계 때문에 발생하는 적용한계를 유한요소법을 이용하여 검토하였다. 전송선로 근사방법은 λ 2p인 영역(여기에서, p는 전파흡수체의 배열주기, λ는 관심주파수 상한에서의 파장)에서 유효하다. 따라서 높은 물성을 갖거나 물리적 크기가 큰 구조의 전파흡수체는 흔히 이러한 조건을 만족치 않으며, 전자파 산란을 직접 수치해석적으로 계산해야 한다.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.211-235
• /
• 2013

An incompressible smoothed particle hydrodynamics (ISPH) method based on the incremental pressure projection method is developed in this study. The Rayleigh-B$\acute{e}$nard convection in a square enclosure is used as a validation case and the results obtained by the proposed ISPH model are compared to the benchmark solutions. The comparison shows that the established ISPH method has a good performance in terms of accuracy. Subsequently, the proposed ISPH method is employed to simulate natural convection from a heated cylinder in a square enclosure. It shows that the predictions obtained by the ISPH method are in good agreements with the results obtained by previous studies using alternative numerical methods. A rotating and heated cylinder is also considered to study the effect of the rotation on the heat transfer process in the enclosure space. The numerical results show that for a square enclosure at, the addition of kinetic energy in the form of rotation does not enhance the heat transfer process. The method is also applied to simulate forced convection from a circular cylinder in an unbounded uniform flow. In terms of results, it turns out that the proposed ISPH model is capable to simulate heat transfer problems with the complex and moving boundaries.

• 설비공학논문집
• /
• 제29권5호
• /
• pp.220-230
• /
• 2017

In this study we apply and compare a variety of numerical methods for calculating residence time distribution in decay tanks, a major design component in the for reducing N-16 radioactivity. Our research group has used a streamlined method using user-defined particle numbers. However, this streamlined method has several problems, including low exiting particle ratios, particle diminishing, and unphysical time distribution, among others. We utilize three numerical methods to establish residence time and time distribution (streamlined, discrete phase method [DPM], and user defined scalar [UDS]) and subsequently compare the averaged results of each. The three tests demonstrate the flow features within the decay tanks, which are then numerically simulated to enable comparison. We conclude that although each simulation predicts similar time averages, the UDS methodology provides a smoother time distribution and tracer contour plots at specific times.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.749-757
• /
• 1999

Holographic interferornetric tomography can provide reconstruction of instantaneous three dimensional gross flow fields. The technique however confronts ill-posed reconstruction problems in practical applications. Experimental data are usually limited in projection and angular scanning when a field is captured instantaneously or under the obstruction of test models and test section enclosures. An algorithm, based on a series expansion method, has been developed to improve the reconstruction under the ill-posed conditions. A three-dimensional natural convection flow around two interacting isothermal cubes is experimentally investigated. The flow can provide a challenging reconstruction problem and lend itself to accurate numerical solution for comparison. The refractive index fields at two horizontal sections of the thermal plume with and without an opaque object are reconstructed at a limited view angle of 80" The experimental reconstructions are then compared with those from numerical calculation and thermocouple thermometry. It confirms that the technique is applicable to reconstruction of reasonably complex, three-dimensional flow fields.elds.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.425-432
• /
• 1996

Integrated performance test of Chemical and Volume Control System (CVCS) was successfully performed in 1994. However, an extensive effort to correct hardware and software problems in the letdown line was required mainly due to the lack of adequate simulation code to predict the test accurately. Although the LTC computer code was used during the YGN 3'||'&'||'4 NSSS design process, the code can not satisfactorily predict the test due to its insufficient letdown line modeling. This study developed a numerical model to simulate the letdown test by modifying the current LTC code, and then verified the model by comparing with the test data. The comparison shows that the modified LTC computer code can predict the transient behavior of letdown system tests very well. Especially, the model was verified to be able to predict the "Stiction" phenomena which caused instantaneous fluctuations in the letdown backpressure and flowrate. Therefore, it is concluded that the modified LTC computer code with the ability of calculating the "Stiction" phenomena wi11 be very useful for future plant desist and test predictions.predictions.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.69-83
• /
• 2023

Analytical solutions to problems are crucial because they provide high-quality comparison data for assessing the accuracy of numerical solutions. Benchmark analytical solutions for the vibrations of cracked functionally graded material (FGM) plates are not available in the literature because of the high level of complexity of such solutions. On the basis of first-order shear deformation plate theory (FSDT), this study proposes analytical series solutions for the vibrations of FGM rectangular plates with side or internal cracks parallel to an edge of the plates by using Fourier cosine series and the domain decomposition technique. The distributions of FGM properties along the thickness direction are assumed to follow a simple power law. The proposed analytical series solutions are validated by performing comprehensive convergence studies on the vibration frequencies of cracked square plates with various crack lengths and under various boundary condition combinations and by performing comparisons with published results based on various plate theories and the theory of three-dimensional elasticity. The results reveal that the proposed solutions are in excellent agreement with literature results obtained using the Ritz method on the basis of FSDT. The paper also presents tabulations of the first six nondimensional frequencies of cracked rectangular Al/Al2O3 FGM plates with various aspect ratios, thickness-to-width ratios, crack lengths, and FGM power law indices under six boundary condition combinations, the tabulated frequencies can serve as benchmark data for assessing the accuracy of numerical approaches based on FSDT.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.74-80
• /
• 2009

In this study, the static and modal analyses to find the characteristic of eigenvalues for a towed cable were with a free boundary condition at the bottom end carried out with numerical study. The resulting numerical code with finite element method was used to study sample problems for a cable with towing speeds. After tracing the equilibrium state with a towing speed through the static analysis, modal analysis on the basis of static results was performed. The static top tension for a critical towing speed is nearly 50 percent of what it was for a free hanging pipe. From static analyses, it is found that towing speed has a noticeable effect on top tension of a towed pipe. At a high towing speed, differences between the first and second periods become larger. Compared to the fundamental period for a free hanging pipe, that for a towed pipe with a critical towing speed is approximately 1.4 times larger. This result is very important point in that the lock in condition and tension of the towed cable system with top excitation can be predicted. The corrected close form solution to solve natural periods for a towed cable was presented in this study. The code is validated by comparison of the results of theoretical and numerical studies. Two results were in very good agreement. This study can contribute to predicting the lock-in condition and tension for a towed cable or pipe with top excitation.

• 한국지반공학회논문집
• /
• 제30권2호
• /
• pp.77-85
• /
• 2014

3상으로 이루어진 다공성 매질 내에서 공기의 흐름을 확인하기 위해 실내시험과 수치해석 알고리즘의 비교분석을 하였다. 불포화 지반내의 유체의 흐름을 확인하는 연구는 이산화탄소 지중저장을 위한 안정성 예측을 위해 중요한 기초연구이다. 일반적으로 대기압에 노출되어 있는 지반공학적인 문제들은 3상 다공성 매질 내부에서 발생할 수 있는 공기압을 '0'으로 가정하고 해석하지만, 지중 1km 지점에서의 불포화토의 거동은 기체압력을 고려하여 지반의 변형과 연계해석이 필수적이다. 본 연구는 이러한 지중 깊숙한 곳에서 발생할 수 있는 불포화 지반의 거동을 해석하고자 공기압의 확산과 소산에 대한 수치해석과 실내배수시험을 비교분석하여 유한요소해석 알고리즘을 검증하고자 한다.

• 물과 미래
• /
• 제29권6호
• /
• pp.141-154
• /
• 1996

열 유동 현상을 규명하기 위한 연구로서 2차원 연직 좌표계의 수체 유동 컴퓨터 프로그램을 개발하였다. 이러한 연구의 구체적인 목적은 일차침전조 같은 폐수나 용수처리 및 상수원 호소에서의 수체유동에 대한 기작을 파악하고자 함이다. 이렇게 개발한 컴퓨터 프로그램 성능을 문헌에 나타난 수치해석 및 실험 자료와 성공적으로 비교, 검증하였다. 첫 번째 검증 문제는 응축열 방출에 따른 수체유동해석에 대한 것이며 두 번째 문제는 캐나다 온타리오주 사리나시에 있는 일차침전조에 대한 수치해석 실험 결과이다. 이렇게 개발된 컴퓨터 프로그램은 2차원 호소의 전도와 같은 특성규명에 응용하였으며 주요 변수로는 유량, 바람의 속도 그리고 온도 분포 등을 고려하였다. 나아가서 호소의 전도 현상과 같은 유동 특성을 규명하기 위한 연구의 일환으로서 바람의 속도나 온도 분포에 따른 수치해석을 시도하였다. 결과는 물리적으로 일관성 있게 나타났으며 수체 유동 특성 규명을 위한 유용한 도구로서 가능성을 보였다.

• 대기
• /
• 제26권3호
• /
• pp.445-459
• /
• 2016

Air temperature deviation (ATD) is one of major indicators to represent spatial distribution of urban heat island (UHI), which is induced from the urbanization. The purpose of this study is to evaluate the accuracy of air temperature deviation about Climate Analysis Seoul (CAS) workbench, which had developed by National Institute Meteorological Science and TU Berlin. Comparison and correlation analysis for CAS ATD including meso-scale air temperature deviation, local-scale air temperature deviation, total air temperature deviation, surface heat flux deviation, cold air production deviation among meso-scale numerical modelling variable in 'Seoul Region', micro-scale numerical modelling in 'Detail Region', and CAS workbench variable using observation data in ground stations. Comparison between night time OBS ATD and CAS ATD show that have most close values. Most of observations ($dT_{max}$ and $dT_{min}$) have highly positive ($dT_{SHP}$, $dT_{CA}$, MD, TD, $f_{BS}$, $f_{US}$, $f_{WS}$, $h_B$) and negative ($f_{VS}$, $f_{TV}$, $h_V$, Z) correlations. However, CAS workbench needs further improvement of both observational framework and analytical framework to resolve the problems; (1) night time OBS ATD of has closer values in compare with at high rise mountain area and (2) correlations are very dependable to meteorological scale.