• Journal of Animal Science and Technology
• /
• v.62 no.1
• /
• pp.21-30
• /
• 2020

This study was conducted to evaluate effects of dietary protease (PR) on growth performance, nutrient digestibility, and intestinal morphology of weaned pigs. A total of 75 weaned pigs [7.06 ± 0.18 kg of average body weight (BW); 28 day old] were randomly allotted to 3 dietary treatments in a randomized complete block design (blocks = BW and sex): a diet based on corn and soybean meal to meet the requirement of crude protein (CP) as a positive control (PC; CP = 24.49%), a low protein diet as a negative control (NC; CP = 22.51%), and NC + 0.02% PR. The PR used in this study was a commercial product containing 75,000 protease units/g derived from Nocardiopsis prasina produced in Bacillus licheniformis. Pigs were fed the dietary treatments for 6 weeks and the diets containing 0.2% chromic oxide for the last week of this study. Blood, feces, ileal digesta, and ileum samples were collected from randomly selected two pigs in each pen on respective time points. Measurements were growth performance, apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of dry matter (DM), CP, and energy, frequency of diarrhea, packed cell volume (PCV), and ileal morphology of weaned pigs. Pigs fed PC and PR had higher (p < 0.05) final BW, average daily gain (ADG), and gain to feed ratio (G:F) during overall experimental period than those fed NC. Pigs fed PC and PR had higher (p < 0.05) AID or ATTD of DM, CP, or energy than those fed NC. Moreover, pigs fed PR had higher ratio between villus height and crypt depth (p < 0.05) and number of goblet cells (p < 0.05) than those fed NC. Addition of PR decreased (p < 0.05) frequency of diarrhea for the first two weeks after weaning compared with PC and NC. In addition, pigs fed PR had lower (p < 0.05) PCV on d 14 after weaning than those fed PC and NC. In conclusion, addition of PR in nursery diets with a low protein level significantly improved growth performance, nutrient digestibility, and intestinal morphology of weaned pigs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.545-549
• /
• 2010

Low-frequency noise (1/f noise) has been measured in order to analyze the Vth instability of ZnO TFTs having two different active layer thicknesses of 40 nm and 80 nm. Under electrical stress, it was found that the TFTs with the active layer thickness of 80 nm shows smaller threshold voltage shift (${\Delta}V_{th}$) than those with thickness of 40 nm. However the ${\Delta}V_{th}$ is completely relaxed after the removal of DC stress. In order to investigate the cause of this threshold voltage instability, we accomplished the 1/f noise measurement and found that ZnO TFTs exposed the mobility fluctuation properties, in which the noise level increases as the gate bias rises and the normalized drain current noise level($S_{ID}/{I_D}^2$) of the active layer of thickness 80 nm is smaller than that of active layer thickness of thickness 40 nm. This result means that the 80 nm thickness TFTs have a smaller density of traps. This result correlated with the physical characteristics analysis performmed using XRD, which indicated that the grain size increases when the active layer thickness is made thicker. Consequently, the number of preexisting traps in the device increases with decreasing thickness of the active layer and are related closely to the $V_{th}$ instability under electrical stress.

• Korean Journal of Ichthyology
• /
• v.34 no.4
• /
• pp.231-243
• /
• 2022

To investigate the taxonomic status of undescribed species Acheilognathus sp. HR from Korean Acheilognathidae discovered from the Dalcheon River, a tributary of the Hangang River, molecular phylogenetic and morphological characteristics were compared and analyzed with previous studies. As a result of molecular phylogenetic analysis, A. sp. HR formed the same genetic clade as the five subspecies of Acheilognathus tabira, but formed a separate monophyletic group based on the unique genotype, showing clear differences. As a result of morphological analyses, the dorsal fin color in males is grayish and the nuptial coloration of the outer edge of the anal fin is white. The outer edges of the dorsal and anal fins are convexly rounded. A black blotch is present on the dorsal fin of the juvenile, but there is a black blotch absent on the dorsal fin of the small adult female. In the counts, the number of branched dorsal rays is 12~13. In the measurements, the length of the barbels is short and the body depth is deep. Therefore, the A. sp. HR of Hangang River is considered at the level of a distinct species distinguished from each other by the five subspecies of A. tabira by molecular phylogenetic, morphological, and limited distributional characteristics.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.575-583
• /
• 2022

Magnetic resonance diffusion tensor imaging (DTI) has revealed the disruption of brain white matter microstructure in normal aging and alcoholism undetectable with conventional structural MR imaging. we plan to analyze the FA measurements of the ROI of dangerous drinkers selected from Alcohol Use Disorders Identification Test (AUDIT) and Tract-Based Spatial Statics (TBSS) tool was used to extract FA values in the ROI from the image acquired through the pre-processing process. TBSS has a higher sensitivity of the FA value and MD value in the white matter than the brain gray matter, and has the advantage of quantitatively deriving the unlimited degree of brain nerve fibers, and more specialized in the brain white matter. We plan to analyze the fractional anisotropy (FA) measurement value for damage by selecting the center of the anatomical structure of the white matter region of the brain with high anisotropy among the brain neural networks that are particularly vulnerable to alcohol as the region of interest (ROI). In this study, we expected that alcohol causes damage to the brain white matter microstructure from FA value in various areas including both Choroid plexus. Especially, In the case of the moderate drunker, the mean value of FA in Lt, Rt. Choroid plexus was 0.2831 and 0.2872, whereas, in the case of the severe drunker, the mean value of FA was 0.1972 and 0.1936. We found that the higher the score on the AUDIT scale, the lower the FA value in ROI region of the brain white matter. Using the AUDIT scale, the guideline for the FA value of DTI can be presented, and it is possible to select a significant number of potentially severe drinkers. In other words, AUDIT was proved as useful tool in screening and discrimination of severe drunker through DTI.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.23-30
• /
• 2014

Purpose - The purpose of this study is to analyze the efficiency of retail businesses by dividing domestic retailers into discount stores, super supermarkets (SSMs), and department stores. It suggests retail-business investment strategies by using data environment analysis (DEA) to analyze how input elements such as store area, parking lot area, number of employees, and sales management expenses for the convenience of customers positively affect business performance measurements such as sales and visiting customers per day. Research Design, Data, and Methodology - The DEA model calculates a ratio of the weighted mean of various inputs to the weighted mean of various outputs and measures the efficiency of a specific decision making unit (DMU). The study included 19 companies (five discount store DMUs, ten SSM DMUs, and four department store DMUs). Because the business elements and sizes of retail store DMUs used in this analysis are different, average per-store input and output variables were used. Data were collected from "The Yearbook of Retail Industry in Korea (2012)." DEA analysis was used to determine differences in efficiency among discount stores, SSMs, and department stores in terms of the business elements of each retail business. It was also used to determine what business elements were excessively invested in by comparing and analyzing efficiency by business elements using SPSS software's ANOVA (Analysis of Variance). Results - The CCR and BCC efficiency analysis found that the efficiency of discount stores is low. We believe that the saturation state of discount stores is a major factor. The ANOVA analysis confirms the VRS hypothesis with a statistically significant difference among the three groups, based on an analysis confidence interval of 95%. CRS and SE were not found to be significantly different among the three groups. As for the post hoc test, which concretely shows differences by group, the Scheffe's multiple comparison analysis test found the average differences between group 1 (discount stores) and group 2 (SSM) to be statistically significant. Conclusions - The DEA efficiency analysis implies that investment in input elements, including store area, parking lot area, and sales management expenses, were excessive in the case of discount stores, while SSMs need to invest more in promotion activities such as gifts, events, and coupons for customer management. Department stores have found that small companies invest excessively in input elements. Department stores need to invest in differentiated shopping mall complexes. This study was limited in acquiring statistical data; various input variables which might have shown more secure customer management and promotional expenses could not be applied. As the study was limited in various aspects of the efficiency analyses because financial analyses of the companies and of causal relationships, including satisfaction and loyalty of visiting customers, were not done, these aspects will be examined in the next study.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.31-38
• /
• 2015

In order to achieve a high speed and high quality silicon wafer bonding, the room-temperature direct bonding using atmospheric pressure plasma and sprayed water vapor was developed. Effects of different plasma fabrication parameters, such as flow rate of $N_2$ gas, flow rate of CDA (clear dry air), gap between the plasma head and wafer surface, and plasma applied voltage, on plasma activation were investigated using the measurements of the contact angle. Influences of the annealing temperature and the annealing time on bonding strength were also investigated. The bonding strength of the bonded wafers was measured using a crack opening method. The optimized condition for the highest bonding strength was an annealing temperature of $400^{\circ}C$ and an annealing time of 2 hours. For the plasma activation conditions, the highest bonding strength was achieved at the plasma scan speed of 30 mm/sec and the number of plasma treatment of 4 times. After optimization of the plasma activation conditions and annealing conditions, the direct bonding of the silicon wafers was performed. The infrared transmission image and the cross sectional image of bonded interface indicated that there is no void and defects on the bonded wafers. The bonded wafer exhibited a bonding strength of average $2.3J/m^2$.

• Journal of Korean Biological Nursing Science
• /
• v.8 no.2
• /
• pp.61-72
• /
• 2006

Purpose: This study was to examine the frequency, distribution and characteristics of researches using biological measurement published from 2000 to 2004 in 10 major nursing journals in Korea, Design: Literature analysis. Method: Journals including papers using biological measurements, publishing year, research design and outcome variables were analyzed. Results: 1. Researches using biological measurement were 318(13.3%). 2. Researches using biological measurement in the Korean Academy of Nursing were highest(97papers, 17.5%) among the nursing journals. The proportion of papers using biological measurement to total number of papers was the highest in the Journal of Korean Biological Nursing Science as 77.3%(51papers). 3. The 233 papers(73.3%) were experimental researches among 318 papers using biological measurement which showed the highest proportion. 4. Patients were highest subjects of researches using biological measurement(197papers, 61.9%). 5. Blood test was most frequently used as physiological variables from 2001 to 2004. Conclusion: Researches using biological measurement of 10 Korean Nursing Journals in year 2000-year 2004 were very low. We need more researches using biological measurement to provide more objective evidence for nursing practice.