• 열처리공학회지
• /
• 제7권2호
• /
• pp.118-128
• /
• 1994

Five alloys were selected randomly in the composition range showing the best shape memory effect in Fe-Mn-Si system reported by Murakami. The shape memory effects of those alloys were mainly investigated through the training treatment which consisted of the repetition of 2% tensile deformation at room temperature and subsequent annealing at $600^{\circ}C$ above $A_r$ temperature. At the same deformation degress in rolling $600^{\circ}C$-annealing for 1 hr. showed the best shape memory effect, and 10%-deformation degrees represented maxima of the shpae memory effects at all annealing temperatures, $500^{\circ}C$, $600^{\circ}C$ and $700^{\circ}C$. The shape memory effects of the alloys were increased by increasing training cycle up to 5 cycles. This was because a large number of dislocations introduced by training process gave rise to increase in the austenite yield stress, and acted as nucleation sites for stress induced ${\varepsilon}$ martensite. The thermal cycling treatment, repetition of cooling in nitrogen at $-196{\circ}C$ and heating to $300^{\circ}C$ for 5 min., did not improve the shape memory effect.

• 대한금속재료학회지
• /
• 제46권5호
• /
• pp.304-309
• /
• 2008

Magnesium alloys containing $Mg_2Si$ particles, as a promising cheap heat-resistant magnesium alloy for automobile power train parts applications, are attracting more attention of both material scientists and design engineers. Modification of the Chinese script shape $Mg_2Si$ particle is a key for using this alloy in sand or permanent mould casting. In the present work, the modification effect of Sr and Sb on the corrosion properties of the Mg-5Al-2Si alloy was investigated. Sr or Sb addition promoted the formation of fine polygonal shape $Mg_2Si$ particles by providing the nucleation sites. Sr was more effective element than Sb for shape modification of Chinese script shape $Mg_2Si$. Such improved microstructure of the modified alloy resulted in large improvement in corrosion resistance as compared to unmodified Mg-5Al-2Si alloy.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.343-348
• /
• 2019

Structural and mechanical effects of the dynamical precipitation in two copper-base alloys have been investigated over a wide range of deformation temperatures. Basing upon the information gained during the experiment, also some general conclusion may be formulated. A one concerns the nature of dynamic precipitation(DP). Under this term it is commonly understood decomposition of a supersaturated solid solution during plastic straining. The process may, however, proceed in two different ways. It may be a homogeneous one from the point of view of distribution and morphological aspect of particles or it may lead to substantial difference in shape, size and particles distribution. The effect is controlled by the mode of deformation. Hence it seems to be reasonable to distinguish DP during homogeneous deformation from that which takes place in heterogeneously deformed alloy. In the first case the process can be analyzed solely in terms of particle-dislocation-particle interrelation. Much more complex problem we are facing in heterogeneously deforming alloy. Deformation bands and specific arrangement of dislocations in form of pile-ups at grain boundaries generate additional driving force and additional nucleation sites for precipitation. Along with heterogeneous precipitation, there is a homogeneous precipitation in areas between bands of coarse slip which also deform but at much smaller rate. This form of decomposition is responsible for a specially high hardening rate during high temperature straining and for thermally stable product of the decomposition of alloy.

• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.1-12
• /
• 2022

Bentonite is the most probable candidate to be used as a buffer in a deep geological repository with high swelling properties, hydraulic conductivity, thermal conductivity, and radionuclide sorption ability. Among them, the radionuclide sorption ability prevents or delays the transport of radionuclides into the nearby environment when an accident occurs and the radionuclide leaks from the canister, so it needs to be strengthened in terms of long-term disposal safety. Here, we proposed a surface modification method in which some inorganic additives were added to form NaP zeolite on the surface of the bentonite yielded at Yeonil, South Korea. We confirmed that the NaP zeolite was well-formed on the bentonite surface, which also increased the sorption efficiency of Cs and Sr from groundwater conditions. Both NaP and NaX zeolite can be produced and we have demonstrated that the generation mechanism of NaX and NaP is due to the number of homogeneous/heterogeneous nucleation sites and the number of nutrients supplied from an aluminosilicate gel during the surface modification process. This study showed the potential of surface modification on bentonite to enhance the safety of deep geological radioactive waste repository by improving the radionuclide sorption ability of bentonite.

• 대한설비공학회지:설비저널
• /
• 제6권1호
• /
• pp.1-8
• /
• 1977

This paper describes an experimental investigation which has been carried out with distilled water with the range of heat flux and pressure covering 7,400-28,000kcal/$m^2/h$ and 0.42-1.0332kg/$cm^{2}abs$, respectively. In this experiment, Nickel coated mirror surface heater of 5 cm O.D. was used as a heating source. The conclusions summerized as follows;1. The useful correlation of the test data for the heat transfer coefficient is presented as a function of the pressure. $$a/a_{s}=c{\times}p\;0.18$$ where a is the heat transfer coefficient and $a_s$ is the heat transfer coefficient at atmospheric pressure and p is the pressure, C is constant. 2. The bubble diameter near the heating surface and rising velocity increased with the heat flux. 3. A decrease in pressure results in the decrease of the number of nucleation sites and the increase of the bubble volume. 4. Bubble rising velocity differences are incrased maximumly up to $200\%$ of that at atmopheric pressure.

• BMB Reports
• /
• 제55권12호
• /
• pp.595-601
• /
• 2022

Polycomb Repressive Complex 2 (PRC2) exhibits key roles in mammalian development through its temporospatial repression of gene expression. EZH1 or EZH2 is the catalytic subunit of PRC2 that mediates the mono-, di- and tri-methylation of histone H3 lysine 27 (H3K27me1/2/3), H3K27me2/me3 being a hallmark of facultative heterochromatin. PRC2 is a chromatin-modifying enzyme that is recruited to a limited number of "nucleation sites", spreads H3K27 methylation and fosters chromatin compaction. EZH1 and EZH2 exhibit differences in their expression patterns, levels of histone methyltransferase activity (HMT) in the context of PRC2, and DNA/nucleosome binding activity. This suggests that their roles in heterochromatin formation are disparate. Dysregulation of PRC2 activity leads to aberrant gene expression and is implicated in cancer and developmental diseases. In this review, we discuss the distinct function of PRC2/EZH1 and PRC2/EZH2 in the early and late developmental stages. We then discuss the cancers associated with PRC2/EZH1 and PRC2/EZH2.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2742-2746
• /
• 2023

The corrosion behavior of copper immersed in dilute oxychloride solution (100 mM) was studied through surface investigation and in-situ monitoring of open-circuit potential. The copper corrosion was initiated with copper dissolution into a form of CuCl^-₂, resulting in mass decrease within the first 40 h of immersion. This was followed by a hydrolysis reaction initiated by the CuCl^-₂ at the copper surface, after which oxide products were formed and deposited on the surface, resulting in a mass increase. The formation of nucleation sites for copper oxide and its lateral extension during the corrosion process were examined using focused ion beam (FIB)-scanning electron microscopy (SEM). The presence of metastable compounds such as atacamite (CuCl₂·3Cu(OH)₂) on the corroded copper surface was revealed by X-ray photoelectron spectra (XPS) and transmission electron microscopy (TEM)-energy dispersive spectrometry (EDS) analysis.

• 열처리공학회지
• /
• 제36권5호
• /
• pp.285-297
• /
• 2023

The effects of aging treatment sequence, specifically pre-aging and post-aging, on the microstructure and mechanical properties of Al-Zn-Mg-Cu aluminum alloys has been studied in comparison to symmetrically rolled specimens. In symmetrically rolled specimens, a straight-band precipitation distribution was observed, whereas asymmetrically rolled specimens exhibited a curved-band microstructure of fine precipitates. Notably, the asymmetrically rolled specimens displayed higher strengths. In the case of post-aging, the aging process occurred after rolling, and the dislocations generated during rolling acted as nucleation sites for precipitates during aging. This resulted in the formation of fine precipitates, contributing to improved mechanical properties compared to symmetric rolling. To enhance strength of the Al-Zn-Mg-Cu aluminum alloys, asymmetric rolling proves to be more effective than symmetric rolling, with post-aging showing greater efficacy than pre-aging.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.9-23
• /
• 1994

Multitarget bias cosputter deposition(MBCD)에 의해 저온($200^{\circ}C$)에서 NaCI(100)상에 정합$CoSi_2$를 성장시켰다. X-선회절과 투과전자현미경에 의해 증착온도와 기판 bias전압에 따른 각각 silicide의 상전이와 결정성을 관찰하였다. Metal induced crystallization(MIC) 과 self bias 효과에 의해 $200^{\circ}C$에서 기판전압을 인가하지 않은 경우에도 결정질 Si이 성장하였다. MIC현상을 이론 및 실험적으로 고찰하였다. 관찰된 상전이는 $Co_2Si \to CoSi \to Cosi_2$로서 유효생성열법칙에 의해 예측된 상전이와 일치하였다. 기판 bias전압 인가시 발생한 이온충돌에 의한 충돌연쇄혼합(collisional cascade mixing), 성장박막 표면의 in situ cleaning, 핵생성처(nucleation site)이 증가로 인하여 상전이, CoSi(111)우선방위, 결정성은 증착온도에 비해 기판bias전압에 더 큰 영향을 받았다. $200^{\circ}C$에서 기판 bias전압을 증가시킴에 따라 이온충돌에 의한 결정입성장이 관찰되었으며, 이를 이온충독파괴(ion bombardment dissociation)모델에 의해 해석하였다. $200^{\circ}C$에서의 기판 bias전압증가에 따른 결정성변화를 정량적으로 고찰하기 위해 Langmuir탐침을 이용하여 $E_{Ar},\; \alpha(V_s)$를 계산하였다.

• 폴리머
• /
• 제27권4호
• /
• pp.293-298
• /
• 2003

제한공간에서 형성되는 폴리(트리메틸렌 테레프탈레이트) (PTT)의 결정구조를 광학현미경, 소각 광산란 및 X-선 회절로 조사하였다. 인자 $\delta$로 대표할 수 있는 배제 성분의 이동거리는 폴리(에틸렌 테레프탈레이트) (PET/PTT) 블렌드의 형태구조 패턴을 결정하는데 중요한 역할을 하였다. 단계 결정화할 경우, PTT 결정화는 앞서 성장한 PET 결정의 구정 사이 영역에서 시작되었으며, 구정 사이 영역이 채워질 때까지 진행하였다. PET 구정 표면은 PTT 결정화에 매우 효과적인 핵 생성 작용을 유도함으로써 transcrystalline 구조의 PTT 결정을 유도하였다. 그 결과 PTT가 많은 상에서 전형적인 구정 구조와 함께 transcrystalline구조가 혼재하는 독특한 형태구조가 관찰되었다. PET 구정의 라멜라 사이나 피브릴 사이의 영역에서는 공간적 제한으로 인하여 PTT분자들의 형태 자유도가 감소하였으며, 이러한 감소 요인은 PET구정 내ㆍ외부에서의 PTT 결정화와 용융 거동에 차이를 유발하였다.