• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.462-468
• /
• 2010

Carbon Nanotubes (CNTs) have recently emerged as a material with outstanding properties. It has shown promising potential for applications in many engineering fields as electronic devices, thermal conductors, and light-weight composites. Researchers have investigated their use as reinforcements in themetal matrix composites of CNTs. In the present work, we decorated CNTs with Ni particles by electroless plating. The CNTs were wet-ball milled for various milling times with a nickel sulfate solution. The precipitated Ni particles were observed mainly by FESEM. In this study, the dispersion of the CNTs and Ni particles was improved with the addition of the surfactant. Also, as the CNTs were shortened and widened by an increased ball milling time, the size of the precipitated Ni particles increased. It was estimated that the CNTs were deformed and caused some defects on their surface during the ball milling process. Those defects were assumed to be heterogeneous nucleation sites for the Ni particles.

• 한국자기학회지
• /
• 제5권4호
• /
• pp.275-280
• /
• 1995

Ba-Ferrite의 높은 보자력을 제어할 목적으로 $Fe^{+3}$의 일부를 2가 이온과 4가 혹은 5가 이온인 dopants로 치환할때 치환이온의 종류와 그 치환량에 따라 자기적 물성 과 입자특성은 매우 다르게 나타난다. $co^{+2}$의 치환은 magneto-plumbite 구조중 R-block내 치환과 과잉의 S-block 생 성을 촉진시켜 Ba-ferrite의 높은 보자력을 효과적으로 감소시키고 더 높은 포화자화 값을 나타내지만, 입자크기 및 그 분포 뿐만아니라 보자력의 분포도도 불균일하게 만드는 단점이 있다. $Ti^{+4}$의 치환은 포화자화값을 감소시키지만 보자력의 감소에도 상당한 영향을 미치고 있다. 또한 $Ti^{+4}$는 비정질체내에서 핵생성 촉진제로서 입자크기 및 판상비를 효과적으로 감소시키며, $Co^{+2}$에 의한 과잉의 S-block의 생성량을 줄여 자기적 물성을 균일하게 하는 작용을 하고 있다. 따라서 2가 이온과 4가 이온의 치환량 결정은 더 높은 포화자화값을 얻기 위해서 과잉의 2가 이온을 사용한다거나 원자가 보상을 위해 동등량으로 치환하기보다는 자기적 물성과 입자특성을 고려하여 최적화되어야 한다.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.13-18
• /
• 1999

다이아몬드 박막은 RF PACVD법에 의해 수소와 메탄으로부터 실리콘 웨이퍼 상에 성장되어졌다. 박막 성장 전에 표면의 핵생성 밀도를 증가시키기 위하여 1㎛의 다이아몬드 페이스트로 기계적 흡집을 내어 사용하였다. 메탄 농도를 변화시켜 제작한 박막에 대한 평가는 XRD, SEM 및 Raman Spectroscopy에 의해 이루어졌다. 성장된 박막의 결정성은 메탄 농도가 낮을수록 증가되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.124.1-124.1
• /
• 2016

In this work, uniform thickness and good adhesion of electrodeposited copper layer were achieved on AZ91 Mg alloy in alkaline noncyanide copper solution containing pyrophosphate ion by employing appropriate zincate pretreatment. Without zincate pretreatment, the electrodeposited copper layer on AZ91 Mg alloy was porous and showed poor adhesion which was explained by small number of nucleation sites of copper due to rapid dissolution of the magnesium substrate in the pyrophosphate solution. The zincate pretreatment was found as one of the most important steps that can form a conducting layer to cover AZ91 surface which decreased the dissolution rate of AZ91 Mg alloy about 40 times in the copper pyrophosphate solution. Electrodeposited copper layer on AZ91 Mg alloy after an appropriate zincate pretreatment showed good adhesion and uniform thickness with bright surface appearance, independent of the deposition time but the surface roughness of the electrodeposited copper layer increased with increasing Cu deposition time.

• 한국결정학회지
• /
• 제3권1호
• /
• pp.53-66
• /
• 1992

Extensive research has been perform성 on the property-microstructure-process condition relations of thin films. The various proposed models are mainly based on physical vapor deposition processes. Especially the study on the surface condition of substrates in Zone 1 with low surface mobility has not been sufficient. In this study, therefore, we discussed the mochological changes of TiN films deposited by plusma enhanced chemical vapor deposition process with substrates of different composition and micro-rorghness, and compared it with the Structure Zone Model. We could find out that the growth rate of films increased and micro-grain size decreased with the increase in micro-roughness, but it does not improve the mechanical properties because of many imperfections like voids, micro-cracks, stacking faults, etc. This means that, in these deposition conditions, the increase in shadowing diffect is more effective than the increase in nucleation sites on the growth of films due to the increase in substrate roughness.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.127-134
• /
• 2002

Microporous polypropylene hollow fiber membrane was fabricated from isotactic polypropylene-soybean oil system by melt spinning process. Addition of nucleating agent accelerated the crystallization rate and elevated the crystallization temperature. Nucleating agent increased the number of nuclei and spherulites, which offered more inter-spherulitic amorphous sites for stretching. Benzoic acid, adipic acid, and dibenzylidene sorbitol were selected as nucleating agents, and their characteristics and effects were investigated by thermal and optical analyses. Spherulite growth and micropore formation characteristics were correlated with the kind of nucleating agent. Benzoic acid and adipic acid showed the remarkable nucleating effect, while dibenzylidene sorbitol was less effective than those. Nucleating agents also helped the sample have uniform microporous structure. Increase of nucleating agent composition enhanced the nucleation effect to some extent. Nucleating agents played very important roles in enhancing the membrane porosity and water flux.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1514-1515
• /
• 1998

Diamond thin films were deposited on n-type (100) Si wafers from $H_2-CH_4$ gas mixture by rf PACVD. Prior to deposition, mechanical scratching was done to improve density of nucleation sites with diamond paste of 3${\mu}m$. The microstructure of deposited diamond thin films was studied by using the following conditions : discharge power of 500W, $H_2$ flow rate of 50sccm, reaction pressure of 20torr, and $CH_4/H_2$ ratio of 0.3$\sim$1%. The deposited diamond thin films showed that the crystallite was increased at the lower methane concentration. The deposited thin films were characterized by Scanning Electron Microscopy. Raman Spectroscopy and Fourier-Transform Infrared Spectroscopy.

• 한국주조공학회지
• /
• 제5권3호
• /
• pp.19-26
• /
• 1985

This study has been carried out to examine into wettability of Cu-5%Sn alloy in $Al_2O_3$, MgO, $SiO_2$ and graphite, respectively and investigated into the change in macrostructure of Cu-5%Sn alloy according to kind and mixing rate of mold-coating. The results obtained from the experiment are summerized as follows; 1. Cu Cu-5%Sn alloy, wettabilities of $Al_2O_3$ and MgO were good, on the other hand, wettabilities of $SiO_2$ and graphite were bad. 2. The fine equiaxed zone was created because of the role of $Al_2O_3$ and MgO as preferential nucleation sites. 3. Notwithstanding change of mixing rate of $SiO_2$ in mold coating the equixed zone was not created. 4. The area of equiaxed zone was varied according to mixing rate in the case of using $Al_2O_3$ and MgO in mold-coating.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.350.2-350.2
• /
• 2014

We investigated the structural and optical evolution of Ga2O3 thin films on glass substrates deposited using radio frequency magnetron sputtering. Initially, amorphous Ga2O3 thin film is grown, and then, surface humps and nanowire (NW) bundles are gradually formed as the film thickness increases. The surface humps are Ga-rich and provide nucleation sites for NWs through a self-catalytic vapor-liquid-solid mechanism with self-assembled Ga droplets. Both the surface humps and the NWs induce variation of the optical properties such as the optical bandgap and refractive index by absorbing light in the ultraviolet region.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.262-262
• /
• 2012

Modifications of graphenes have been studied for catalytic applications due to their advantages such as high surface area, conductivity and thermal stability. In this research, individual graphene oxide (GO) sheets were exfoliated from graphite using Hummers and Offeman method. Pd nano-particles were deposited on the GO surface using Pd2+ ion exchange where hydroxyl groups on the GO act as nucleation sites of Pd nanoparticles and their dispersions. The thermal treatments of the Pd-GO in H2 flow produced Pd-Graphene nanocomposites. Their catalytic performances in Sonogashira reaction were investigated. Morphological and chemical structures of the GO, Pd-GO, and Pd-Graphene were investigated using FT-IR, XRD, TEM, STEM, and XPS. The catalytic performances have been investigated using microwave reactor.