• Journal of Ship and Ocean Technology
• /
• 제6권1호
• /
• pp.27-33
• /
• 2002

Recently, the application of the electric propulsion system becomes popular because of its advantage over conventional propulsion. However, the complicated flow mechanism and interaction around the azimuth thruster are not fully understood yet, and the studies on the powering performance characteristics with azimuth/pod thrusters are now in progress. The experimental method developed in KRISO(Korea Research Institute of Ships & Ocean Engineering) is introduced and the results of the powering performance tests, consisting of resistance, self-propulsion and propeller open water tests for a cable layer with two azimuth thrusters are presented. For the analysis of powering performance with azimuth thrusters, it is necessary to evaluate the thrust/drag for components of a thruster unit, Extrapolation results could differ according to the various definitions of the propulsion unit; that is the pod, thruster leg and/or nozzle can be treated as hull appendages or as part of propulsion unit, The powering performances based on several definitions are investigated for this vessel. The results of the measurements for the 3-dimensional velocity distribution on the propeller plane are presented to understand the basis of the difference in propulsion characteristics due to the propeller rotational directions.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.107-117
• /
• 2007

A surface piercing propeller (SPP) in tunnel has been proposed recently as a new propulsion system for a high speed air cavity ship. The purpose of the present study is to investigate the characteristics of the SPP in tunnel through a series of model tests. A model propulsion system is placed on a dummy body made of Acrylics. The tunnel is divided into two regions by a guide vane extending from the inlet to the center of the propeller shaft. Air has been supplied from an air nozzle placed at the bottom of the dummy body and the changes in propeller performances caused by the air flow are investigated. The measurements are done for open water and in-tunnel conditions, both for fully and partially submerged propeller. The influence of the guide vane configurations on the propeller performance is also studied. The experiments are performed at the variable pressure circulation water channel of Inha University.

• 태양에너지
• /
• 제19권3호
• /
• pp.43-51
• /
• 1999

Axisymmetric circular water jet impinges against rectangular heated surface with uniform hear flux and wire-mesh screens are set up in the nozzle-to-heater space to augment heat transfer. In the free jet region to be used them, pressure drop and intensive turbulence flow was brought up. When water jet system is not used wire-mesh screens, maximum heat transfer appears in the stagnation point and the secondary maximum appears X/D=4 but it disappears when they are is used. In the low velocity(Vo<6.0m/s), coarse mesh-screen enhanced heat transfer but fine mesh-screens inpeded heat transfer. In the high velocity(Vo>6m/s), all of them enhanced heat transfer. Average Nusselt number of experimental system to be used wire-mesh screens was promoted $4{\sim}6$times than that of simple water jet system. The stagnation heat transfer of experimental system to be used wire-mesh screens was augmented 6times that of simple water jet system.

• 한국연소학회지
• /
• 제14권4호
• /
• pp.33-40
• /
• 2009

Waste Thermal Pyrolysis Melting process was proposed and has been studied in order to prevent air pollution by dioxin and fly ash generated from combustion process for disposal of waste. In this study, applicability as the fuel of diffusion burner of synthesis gas formed from Waste Thermal Pyrolysis process was addressed. Results showed that there is no big difference in the flame shape between MNDF and SNDF, and lift off was detected in MIDF but flame is more stable in SIDF which contains hydrogen with high combustion velocity as flow rate in first nozzle is increased. And radiation heat flux in inverse diffusion flame of synthesis gas was found to be more by 1.5 times than that in inverse diffusion flame of methane because of higher mole fraction of $CO_2$ with high emissivity in product gas.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.290-298
• /
• 2005

A study of design and analysis for the POD type waterjet is conducted. The analysis and design of waterjet system are more difficult than that of conventional propulsor because waterjet is complicatedly composed of many parts which are impeller, stator, inlet, nozzle, etc. The streamline method is traditionally used in the design of pump whose characteristics are similar to those of waterjet. This streamline method, however, has some limitation in analysis of a viscous flow as well as the interaction of inlet part of hull. In the present study, the developed CFD program is applied to the analysis of POD type waterjet. The developed program is first validated by comparing the existed experimental results. The designed waterjet system is also analyzed by the developed CFD program and analyzed results show that the performance of the present POD type waterjet is above the requirement.

• 한국추진공학회지
• /
• 제9권1호
• /
• pp.1-8
• /
• 2005

설계단계에서 수행되는 액체로켓엔진의 추력실 형상설계와 성능예측을 위하여 화학평형을 고려한 축대칭 압축성 해석코드를 개발하였다. 사용자의 편리함과 효율성에 중점을 두었으며, 형상파라미터의 입력값에 따라 자동으로 격자를 생성하고 연소실 조건은 추진제 조합, 연소압 그리고 혼합비를 지정함으로서 내부에서 계산하게 된다. 따라서 설계자는 추력실 형상 및 작동조건을 변화시켜 각각의 설계변수가 추력성능에 미치는 영향을 빠르고 손쉽게 파악할 수 있도록 하였다. CEA의 결과, JPL 노즐의 실험결과, 두 종류의 LRE 실제 엔진 자료, 그리고 KSR-III의 설계점 및 탈설계점 연소시험결과와 비교함으로서, 다양한 측면에서 해석코드의 정확도와 적용성을 평가하였다.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.97-102
• /
• 2000

Pitch precursors were synthesized from coal tar(CT) and pyrolysis fuel oil(PFO, petroleum residue oil) at relatively low temperature of $250^{\circ}$, in the presence of horontrifluorideidiethyletherate complex(BFDE) as a catalyst and nitrobenzene(NB) as a co-catalyst. The softening point, nitrogen content and carbon yield increased with an increase of concentration of NB. The pitch precursors with good spinnability were prepared by removing the volatile components through $N_2$ blowing. The precursor pitches were spun through a circular nozzle, stabilized at $310^{\circ}$ and finally carbonized at $1000^{\circ}$. The optically anisotropic structure formed at the absence of NB was changed into isotropic structure, showing a decrease in size of the flow domain. The hollow carbon fiber could be prepared in the process of stabilization. The results proposed that the morphology of carbon materials could be controlled by changing the concentration of catalyst and/or co-catalyst and/or stabilization condition that affect on the mobility of molecules during carbonization.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.37-42
• /
• 2010

재생냉각식 액체로켓엔진의 예비 설계 단계에서 연소기 형상을 결정하기 위한 설계 방안을 제안하였다. CEA에서 예측된 연소 후 가스 물성치를 이용하여 로켓의 성능 및 재생냉각 성능을 계산하였다. 요구 추력, 연소실 압력, 주위 압력, 추진제 혼합비에 대해 1차원 관계식과 경험식으로 최적 유량과 연소기 성능을 예측하고, Rao 노즐 설계 기법을 활용하여 최종적으로 연소기 형상을 결정할 수 있는 방안을 제시하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.825-828
• /
• 2010

항공용 가스터빈 엔진은 운용 범위가 넓으며 고고도에서 운용되므로 극한 환경조건에서의 운용을 요구하며 높은 신뢰성을 요구한다. 따라서 본 연구에서는 혹독한 환경에서 높은 수준의 신뢰성 있는 연소기 개발을 위한 연소기 리그시험 및 엔진 단위의 운용 안정성 평가를 수행, 최적화하였으며, 엔진개발 단계에서 수립된 시동로직을 반영하여 고고도 운전영영에서의 시동 및 운용 안정성을 검증하였다. 리그 및 엔진시험 결과, air swirler가 장착된 인젝터를 적용할 경우, 20kft Hot day 및 $-40^{\circ}C$에서 정상적인 운용 및 시동이 이루어졌다.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.49-56
• /
• 2017

본 연구에서는 환형 시스템에서 열음향 문제를 모델링하기 위하여 자체 3D 유한요소해석을 모델 개발을 통하여 음향장을 해석하였고, 다양한 음향 모드를 벤치마크 연소기의 실험 결과와 비교/검증하였다. 비교 결과, 본 해석에서 사용된 음향장 해석 코드는 환형 시스템에서 실험으로 계측된 다양한 음향모드들을 예측하는데 성공하였다. 또한 연소실의 횡방향 모드는 노즐의 음향 경계 조건의 영향을 크게 받게 되고, 노즐에서의 압력 분포 역시 연소실의 압력장과 밀접한 관련이 있는 것으로 나타났다.