• Horticultural Science & Technology
• /
• v.35 no.3
• /
• pp.373-380
• /
• 2017

Amaryllis ($Hippeastrum{\times}johnsonii$) is commonly propagated by three methods: seeds, offset bulblets, and twin scaling. Since the number and size of bulblets produced by these methods are low, we conducted an experiment to evaluate different bulb cutting methods for propagation. For this purpose, bulbs (circumference of 30 - 35 cm) were sectioned or notched into 8, 12, or 16 segments or twin-scaled into 48, 72, or 96 segments for bulblet formation. Our results show that the largest number of bulblets was produced by the twin scaling method, but they take longer to grow to a final, commercial size. Sectioning and notching resulted in larger, but fewer bulblets than twin-scaling. Compared to notching, sectioning provided more space for the bulblets to grow, and is therefore the recommended method. While increasing the number of sections cut from a single bulb resulted in a larger number of bulblets, the diameter of the bulblets decreased. Therefore, sectioning the bulb into 8 segments was the best method for producing an acceptable number of vigorous bulblets.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.7-11
• /
• 2015

In order to protect the patterned mask from contamination during lithography process, pellicle has become a critical component for Extreme Ultraviolet (EUV) lithography technology. According to EUV pellicle requirements, the pellicle should have high EUV transmittance and robust mechanical property. In this study, silicon nitride, which is well-known for its remarkable mechanical property, was used as a pellicle membrane material to achieve high EUV transmittance. Since long silicon wet etching process time aggravates notching effect causing stress concentration on the edge or corner of etched structure, the remaining membrane is prone to fracture at the end of etch process. To overcome this notching effect and attain high transmittance, we began preparing a rather thick (200 nm) $SiN_x$ membrane which can be stably manufactured and was thinned into 43 nm thickness with HF wet etching process. The measured EUV transmittance shows similar values to the simulated result. Therefore, the result shows possibilities of HF thinning processes for $SiN_x$ EUV pellicle fabrication.

• Archives of Craniofacial Surgery
• /
• v.18 no.4
• /
• pp.277-281
• /
• 2017

Traumatic cleft earlobes are a common problem encountered by plastic and reconstructive surgeons. Various techniques have been reported for the repair of traumatic cleft earlobes. Usually, the techniques of split earlobe repair are divided into two categories, namely straight- and broken-line repairs. Straight-line repair is simple and easy, but scar contracture frequently results in notching of the inferior border of the lobule. It can be avoided by the broken-line repair such as Z-plasty, L-plasty, or a V-shaped flap. Between April 2016 and February 2017, six patients who presented with traumatic cleft earlobe underwent surgical correction using a combination of the inverted V-shaped excision technique and vertical mattress suture method. All the patients were female and had a unilateral complete cleft earlobe. No postoperative notching of the inferior border the lobule occurred during 6-16 months of follow-up. Without the use of a broken-line repair, both the patients and the operators attained aesthetically satisfactory results. Therefore, the combination of the inverted V-shaped excision technique and vertical mattress suture method is considered useful in the treatment of traumatic cleft earlobes.

• Clinics in Shoulder and Elbow
• /
• v.24 no.1
• /
• pp.42-52
• /
• 2021

Reverse shoulder arthroplasty is an ideal treatment for glenohumeral dysfunction due to cuff tear arthropathy. As the number of patients treated with reverse shoulder arthroplasty is increasing, the incidence of complications after this procedure also is increasing. The rate of complications in reverse shoulder arthroplasty was reported to be 15%-24%. Recently, the following complications have been reported in order of frequency: periprosthetic infection, dislocation, periprosthetic fracture, neurologic injury, scapular notching, acromion or scapular spine fracture, and aseptic loosening of prosthesis. However, the overall complication rate has varied across studies because of different prosthesis used, improvement of implant and surgical skills, and different definitions of complications. Some authors included complications that affect the clinical outcomes of the surgery, while others reported minor complications that do not affect the clinical outcomes such as minor reversible neurologic deficit or minimal scapular notching. This review article summarizes the processes related to diagnosis and treatment of complications after reverse shoulder arthroplasty with the aim of helping clinicians reduce complications and perform appropriate procedures if/when complications occur.

• Clinics in Shoulder and Elbow
• /
• v.17 no.2
• /
• pp.68-76
• /
• 2014

Background: Recently, reverse total shoulder arthroplasty (RTSA) has been accepted as a main treatment option in irreparable massive rotator cuff tear with cuff arthropathy. The purpose of this study was to evaluate the early complication incidence and the preliminary clinical results of RTSAs performed in single institute. Methods: Fifty-seven RTSAs (56 patients) were performed between April 2011 and March 2013. The indications for RTSA were cuff tear arthropathy and irreparable massive rotator cuff tear with or without pseudoparalysis. Exclusion criteria were revision, preoperative infections and fractures. At final follow-up, 45 shoulders were enrolled. Mean follow-up duration was 12.5 months (range, 6-27 months). The mean age at the time of surgery was 73.6 years (range, 58-87 years). All the patients were functionally accessed via Constant score, American Shoulder and Elbow Surgeons (ASES) score, pain and functional visual analogue scale (VAS) scores and active range of motion. Complications were documented as major and minor. Major complications include fractures, infections, dislocations, nerve palsies, aseptic loosening of humeral or glenoid components, or glenoid screw problems. Minor complications include radiographic scapular notching, hematomas, heterotopic ossification, algodystrophy, intraoperative dislocations, intraoperative cement extravasation, or radiographic lucent lines of the glenoid. Results: The mean Constant score increased from 31.4 to 53.8 (p < 0.001). The pain and functional VAS scores improved (5.2 to 2.7, p < 0.001, 4.0 to 6.7, p < 0.001) and active forward flexion improved from $96.9^{\circ}$ to $125.6^{\circ}$ (p = 0.011). One or more complications occurred in 16 (35.6%) of 45 shoulders, with one failure (2.2%) resulting in the removal of implants by late infection. The single most common complication was scapular notching (9 [20%]). There were 4 (8.9%) axillary nerve palsies postoperatively (n=3: transient n. palsy, n=1: Symptom existed at 11 months postoperatively but improving). Conclusions: In a sort term follow-up, RTSA provided substantial gain in overall function. Most common early complications were scapular notching and postoperative neuropathy. Although overall early complication rate was as high as reported by several authors, most of the complications can be observable without compromise to patients' clinical outcome. Long term follow-up is required to clarify the clinical result and overall complication rate.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.87-88
• /
• 2014

The paper presents a novel phase locked loop(PLL) control method for robust three-phase thyristor dual converters under sag, notch, and phase loss conditions. This method is applied to three line to line voltages of grid to derive three phase angle errors from three separated single-phase PLLs. They can substitute for abnormal phase to guarantee the synchronization in the various grid fault conditions. The performance of novel PLL with moving average method is verified through simulations.

• Proceedings of the KSLP Conference
• /
• 1998.11a
• /
• pp.189-189
• /
• 1998

점막하 구개열(submucous cleft palate)은 특징적인 임상적 해부학적 기형을 나타내는데 이분 구개수(bifid uvula), 근육의 분리(muscular diastasis), 경구개 후연의 절흔(frank notching of the posterior hard palate)등이다. 결국 이러한 기형을 교정하지 않으면 과비음과 공명장애로 인한 조음장애는 사회생활에 중요한 영향을 미치고, 사람의 인상에 나쁜 영향을 주게되어 개인의 인성 형성의 장애와 삶의 질의 저하를 초래하게 된다. (중략)

• Clinics in Shoulder and Elbow
• /
• v.18 no.4
• /
• pp.242-247
• /
• 2015

Background: The size of the baseplate used in reverse total shoulder arthroplasty (RTSA) tends to be larger than the average size of the glenoid in the Korean population. The mismatch between the sizes of the baseplate and the patient's glenoid may result in improper fixation of the glenoid baseplate. This in turn may lead to the premature loosening of the glenoid component. Thus, we evaluated the short-term results of using a 25-mm baseplate in RTSA. Methods: Seventeen patients with cuff tear arthropathy underwent RTSA with a 25-mm baseplate. The mean age of the patients was 70.1 years, and the mean follow-up period was 14.0 months. We evaluated clinical outcomes preoperatively and postoperatively: the range of shoulder motion, the American Shoulder and Elbow Surgeons (ASES) score, and the Korean Shoulder Society (KSS) score. Results: We found that the mean ASES score and KSS improved from 35.0 to 74.4 (p<0.001) and from 46.9 to 71.8 (p<0.001) with RTSA. The mean forward elevation and abduction, external rotation also improved from $78.6^{\circ}$ to $134.3^{\circ}$ (p<0.05) and from $66.6^{\circ}$ to $125.0^{\circ}$ (p<0.05), from $20.2^{\circ}$ to $28.4^{\circ}$ (p=0.43). Postoperative complications were seen in 12% of patients, but neither the loosening of the glenoid baseplate nor inferior scapular notching were observed. Conclusions: In sum, the results of using a 25-mm baseplate in RTSA were similar to those of previous reports. Even though the outcomes are those of a short-term follow-up, neither the loosening of the glenoid baseplate nor the scapular notching were observed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.163-168
• /
• 2001

Purpose : This study is conducted to evaluate the clinical success of secondary alveolar bone grafting using autogenous iliac particulate cancellous bone marrow in cleft maxilla. Materials and methods : We evaluated 107 cleft patients who had been admitted to the Dept. of Oral and Maxillofacial Surgery of Pusan National University Hospital from January 1, 1991 to January 31, 1999 and had been performed secondary alveolar bone grafting with autogenous particulated cancellous bone marrow from iliac crest. Results : 1. Men were 70 and women were 37, which shows 65.4% and 34.6% and the proportion of males to females was 1.9:1. Unilateral cases were 89(83.2%) and bilateral cases were 18(16.8%). 2. Age of bone grafting is widely distributed from 7 to 29, and the average was 13.2. 3. Success rate was 97.8% in unilateral cases, 94.4% in bilateral cases. Overall success rate was 96.7%. 4. We evaluated the bone graft contour by the percentage of bone attachment level adjacent to the alveolar cleft and the menial side showed 82.4% and the distal 87.7%. 5. The amount of notching the alveolar ridge at the grafted site through the ratio of notching length up to the most apical base to the length of proximal segment anatomic root was 0.19.

• Archives of Plastic Surgery
• /
• v.39 no.5
• /
• pp.470-476
• /
• 2012

Background The whistle deformity is one of the common sequelae of secondary cleft lip deformities. Santos reported using a crossed-denuded flap for primary cleft lip repair to prevent a vermilion notching. The authors modified this technique to correct the whistle deformity, calling their version the cross-muscle flap. Methods From May 2005 to January 2011, 14 secondary unilateral cleft lip patients were treated. All suffered from a whistle deformity, which is characterized by the deficiency of the central tubercle, notching in the upper lip, and bulging on the lateral segment. The mean age of the patients was 13.8 years and the mean follow-up period was 21.8 weeks. After elevation from the lateral vermilion and medial tubercle, two muscle flaps were crossed and turned over. The authors measured the three vertical heights and compared the two height ratios before and after surgery for evaluation of the postoperative results. Results None of the patients had any notable complications and the whistle deformity was corrected in all cases. The vertical height ratios at the midline on the upper lip and the affected Cupid's bow point were increased (P<0.05). The motion of the upper lip was acceptable. Conclusions A cross muscle flap is simple and it leaves a minimal scar on the lip. We were able to reconstruct the whistle deformity in secondary unilateral cleft lip patients with a single state procedure using a cross-muscle flap.