• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.264-269
• /
• 2013

Since MFC(macro-fiber composite) transducer has been developed, many researchers have tried to apply this transducer on SHM(structural health monitoring), because it is so flexible and durable that it can be easily embedded to various kinds of structures. The objective of this paper is to figure out the benefits and feasibility of applying MFC transducers to guided wave technique. For this, we have experimentally tested the performance of MFC patches as transmitter and sensors for excitation and reception of guided waves on the thin aluminum alloy plate. In order to enhance the signal accuracy, we applied the FIR filter for noise reduction as well as used STFT(short-time Fourier transform) algorithm to image the guided wave characteristics clearly. From the results, the guided wave generated based on MFC showed good agreement with its theoretical dispersion curves. Moreover, the ultrasonic Lamb wave techniques based on MFC patches in pitch-catch manner was tested for detection of surface notch defects of which depths are 10%, 20%, 30% and 40% of the aluminum plate thickness. Results showed that the notch was detectable well when the notch depth was 10% of the thickness or greater.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.317-321
• /
• 1989

The fully digitalized inverter has some difficulties in implementation because of the limitation of available memory capacity and computation time. In this paper schemes suitable for a one-chip microprocessor-based realization, which linearize notch angles of selected harmonic elimination (SHE) PWM, are presented. Also the detailed description of the scheme along with the realization is described. The simulation and experiment results show that proposed schemes have the predicted advantages such as good voltage waveforms and a memory-saving.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.40-42
• /
• 2005

In this paper, thrust ripple is minimized using notch and slot-aperture width adjustment in a slotted PMLSM and then optimal design was achieved by using a neural network. This paper has used the moving model node technique to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of optimal model is decreased from 9.44[N] to 0.97[N] greatly compare with it of basic model. The thrust is decreased 1.3[%] from 342.07[N] to 337.48[N] a little.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권3호
• /
• pp.343-348
• /
• 2013

This experiment was conducted to evaluate the development of T cells in intrauterine growth retarded (IUGR) piglets at different gestational stages, and tentatively explore the relationship between T cells development and the Notch signaling pathway. A total of 18 crossbred (Landrace${\times}$Large white) primiparous sows were mated at similar weights and estruses and euthanized at d 60, 90 and 110 of gestation with six replicates for each time point. One IUGR and one normal fetus were picked from each litter. The T-cell subsets, mRNA expression of Delta-like1, Delta-like4, Jagged1, and Notch2 genes in the thymus were investigated. Compared to normal piglets, $CD3^+CD4^-CD8^+$ cells in IUGR fetuses at d 90 was 0.13% lower (p<0.05). At d 110 of gestation $CD8^+$ T cells in IUGR fetuses was 0.19% lower (p<0.05). The percentage of $CD8^+$ T cells was 3.14% lower (p<0.05) of the total T cells in IUGR pigs at d 60. The abundance of Notch2 and Delta-like4 mRNA at d 110 was 20.93% higher and 0.77% (p<0.05) lower, and Delta-like1 mRNA at d 90 was 0.19% (p<0.05) higher compared to normal pigs. These results suggested that normal fetuses had a greater proportion of T-cell subsets at earlier gestation periods, and the Notch signaling pathway was likely partially responsible for these differences to some degree.

• 대한한의진단학회지
• /
• 제17권1호
• /
• pp.63-76
• /
• 2013

The aims of this study are to investigate a logisitic regression equation of the vacuous pulse and the replete pulse for efficacy evaluation of clip-type pulsimeter by using magnetic Hall device. To evaluate the efficacy of clip-type pulsimeter by using magnetic Hall device as sensing the minute movement of a radial artery, one research clinical trial have been performed. The number of subject was 120, the clinical data of patients did treated with a normal statistical method. The systolic peak amplitude, the reflective peak amplitude and time, and the notch peak amplitude and time are analyzed major efficacy parameters to discern the vacuous pulse and the replete pulse. The equations included of five parameters such as systolic peak amplitude, the reflective peak amplitude and time, and the notch peak amplitude and notch amplitude time for determination of the vacuous pulse and the replete pulse were deducted by statistical logistic regression method. It suggests that the logistic regression equations are possible to develop the oriental algorithm for pulse diagnosis.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.344-351
• /
• 2016

열차 운영사의 관점에서, 열차 운행에 관한 주요 관심사는 정해진 운행시간의 준수뿐만 아니라, 그와 동시에 열차 운행을 위해 소비되는 에너지 량을 최소화하는 것이다. 일반적인 수동 운전시, 기관사는 운행 노선의 특성에 따라 미리 규정된 최대 속도 프로파일을 기준으로, 노치를 제어함에 따라 규정 속도를 넘지 않도록 열차의 가감속을 조절한다. 이때 규정 속도를 준수하면서 동시에, 전체 운행 중에 소요되는 에너지 량의 절감을 위해, 기관사가 적절한 노치를 선택할 수 있는 구간별 노치 지정 가이드가 있어야 하며, 이는 운행구간에서의 노치 단계 최적화라는 절차를 통해 가능하다. 본 논문에서는 일반적인 운행 환경뿐만 아니라, 열차가 운행 중에 일시적으로 잔여구간의 트랙 정보 또는 규정속도 정보가 변경되는 이벤트 발생시에도 변화된 정보들을 기반으로 실시간으로 잔역구간의 노치 단계를 최적화 할 수 있는 유전 알고리즘을 활용한 실시간 노치 최적화 방안을 제안하였다. 또한 유전 알고리즘을 통해 얻어진 최적해를 적용할 때 에너지 절감 효과와 최적해 수렴특성에 관하여 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2152-2154
• /
• 2004

A robust bending frequency tracker is proposed to design the adaptive notch filter which removes the time-varying missile structural mode from the sensor measurements. To design the bending frequency tracker, firstly, the signal model is derived from the input-output relationship of Nehorai notch filter structure. Also, the time-varying nature of the bending frequency is modelled as the norm-bounded uncertainty. Based on the uncertain signal model, it is shown that the design problem of robust bending frequency tracker can be casted into that of adaptive robust $H_{\infty}$ filter or equivalently robust LMS filter.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.427-427
• /
• 2021

During the rainy season, heavy downpours are always a source of concern for the world. Flooding and heavy rains can devastate communities, disrupt agriculture, and contribute to traffic accidents.. Weir and flow hall effect sensors are the conventional analytical methods for measuring flow rate; in this paper, we analyzed manhole flowrate statistics. The measurement of the flow rate of a notch/weir is a time-consuming task that necessitates continuous mathematical analysis. . We created three types of IoT sensors in this study: (HC-SR04 ultrasonic, YF-S201 magnetic, and HB100 radar), which take the sensor's real-time input signal and estimate the flow using a notch equation and a previously calibrated optimized coefficient of discharge. The proposed systems are cost-effective, but in terms of accuracy, we found that the HC-SR04 ultrasonic sensor is the best of the three systems

• 융합신호처리학회논문지
• /
• 제20권1호
• /
• pp.45-50
• /
• 2019

모바일 헬스케어 디바이스에서 가장 많이 사용되는 PPG 신호는 디바이스 사용자의 움직임의 영향에 따라 심박수 측정의 정확도가 떨어진다. 그 이유는 사용자의 동잡음의 주파수 대역이 PPG 신호의 주파수 대역과 겹쳐 있기 때문이다. 이러한 동잡음을 제거하기 위해 주파수 분석법, 가속도 센서 적용 등의 다양한 방법들이 연구되어 우수한 성능을 제시하였지만, 저가의 헬스케어 디바이스에 이들 필터법을 적용함에 있어 많은 연산처리 시간과 센서 가격 측면 때문에 적용하기가 어렵다. 이러한 문제점을 해결하기 위해 본 연구에서는 실시간으로 보다 정확한 심박수를 추출하기 위해 퍼지추론 시스템과 적응노치 필터를 이용한 PPG 신호처리 기법을 제안하고 그 성능을 평가하였다. 그 결과, 기존의 방법보다 우수한 결과를 보였으며, 이 결과를 토대로 제안된 방법을 모바일 헬스케어 디바이스 설계에 적용한다면 실시간으로 보다 정확한 심박수 측정이 가능할 것이다.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.526-531
• /
• 2014

Thermal shock resistance property has recently been considered to be one of the most important basic properties, in the same way that the transverse-rupture property is important for sintered hard materials such as ceramics, cemented carbides, and cermets. Attempts were made to evaluate the thermal shock resistance property of 10 vol% TaC added Ti(C,N)-Ni cermets using the infrared radiation heating method. The method uses a thin circular disk that is heated by infrared rays in the central area with a constant heat flux. The technique makes it possible to evaluate the thermal shock strength (Tss) and thermal shock fracture toughness (Tsf) directly from the electric powder charge and the time of fracture, despite the fact that Tss and Tsf consist of the thermal properties of the material tested. Tsf can be measured for a specimen with an edge notch, while Tss cannot be measured for specimens without such a notch. It was thought, however, that Tsf might depend on the radius of curvature of the edge notch. Using the Tsf data, Tss was calculated using a consideration of the stress concentration. The thermal shock resistance property of 10 vol% TaC added Ti(C,N)-Ni cermet increased with increases in the content of nitrogen and Ni. As a result, it was considered that Tss could be applied to an evaluation of the thermal shock resistance of cermets.