• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.2
• /
• pp.15-20
• /
• 2016

Background: The purpose of this study was to compared of scapular position between operation side and non-operation side to the rotator cuff surgery. Methods: This study was carried out with a total 34 patients: male (n=14), female (n=20). Shoulder range of motion (ROM), the quadruple visual analogue scale (QVAS), the shoulder pain and disability index (SPADI), and the scapular index (SI) were used to assess shoulder posture and function. SI was the resting position of the scapular was determined by measuring the distance from the mid-point of the sternal notch (SN) to the medial aspect of the coracoid process (CP) and the horizontal distance from the posterolateral angle of the acromion (PLA) to the thoracic spine (TS) with a soft tape measure. The SI was calculated using the equation: [(SN to CP/PLA to TS) ${\times}$ 100]. Results: There were no significant difference in ROM, QVAS to rotator repair patients according to SI (p>.05). There were significant differences in SI between the operation side and the non-operation side (p<.01). Conclusions: Scapular position was operation side more internal rotation, protraction, abduction than non-operation side. Therefore, health professionals managing for rotator cuff tear repair patients should consider scapular position.

• Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.109-116
• /
• 2013

Eighteen specimens of juvenile Mugilidae were collected in October 2012 from the southern coastal waters of Jeju Island, and identified based on analysis of their mitochondrial DNA16S rRNA sequences. Seventeen specimens of Oedalechilus labiosus and a single specimen of Ellochelon vaigiensis were found, constituting a new record for these species among Korean ichthyofauna. O. labiosus is identified by the angle at the posterior end of its mouth, which contains a round notch, a darkish dorsal margin of the pectoral fin, the presence of 33-36 lateral line scales, and 23-24 vertebrae. E. vaigiensis is identified by dark dorsal and pectoral fins, the presence of 26 lateral line scales, and 25 vertebrae. The proposed Korean name for Oedalechilus is 'Sol-ip-sung-eo-sok' and that for Ellochelon is 'Nup-jeok-ggo-ri-sung-eo-sok'. The proposed Korean names for the species are 'Sol-ip-sung-eo' and 'Nup-jeok-ggo-ri-sung-eo' for O. labiosus and E. vaigiensis, respectively. We present a key for identification of the Mugilidae family of species from Korea, and include these two newly recorded species.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.297-307
• /
• 2010

Noncarious cervical lesions(NCCLs) are characterized as structural defects found on the tooth surface of the cement-enamel junction. Loss of tooth structure through noncarious mechanisms may vary in etiology and clinical presentation for each individual but presently many clinician now classify this as tooth failure of abfraction due to the stress applied in the cervical area of the tooth under oral physiological and pathological loads. In the current study, we investigated the stress distribution of maxillary premolar with NCCL using simulated 3D finite element analysis. The results were as follows: 1. In the sound maxillary premolar, the stresses were highly concentrated at cervical enamel surface of the mesiobuccal line angle, asymmetrically. 2. Once the lesion has been formed, the highest stress concentration was observed around the apex of the wedge shaped lesion. 3. In four types of NCCL, the patterns of stress distribution were similar and the peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 4. Lesion cavity modification of rounding apex, reduced stress of lesion apex. 5. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.231-238
• /
• 2006

Nondestructive examination for low pressure turbine disc in standard nuclear power plant using phased array technique was studied. For this purpose, disc mockups were made and notches were machined in the mockups. Detection and length sizing by different methods are compared. Depth of deep notches could be measured by using AATT(absolute arrival time technique) or RATT(relative arrival time technique) but shallow notches that must be detected in early stage couldn't be measured by these two methods. For this case, notch depth was estimated by using signal response angle range and preyed usefulness.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.220-227
• /
• 2016

Marine seismic data have not only primary signals from subsurface but also ghost signals reflected from the sea surface. The ghost decreases temporal resolution of seismic data because it attenuates specific frequency components. For eliminating the ghost signals effectively, the exact ghost delaytimes and reflection coefficients are required. Because of undulation of the sea surface and vertical movements of airguns and streamers, the ghost delaytime varies spatially and randomly while acquiring seismic data. The reflection coefficient is a function of frequency, incidence angle of plane-wave and the sea state. In order to estimate the proper ghost delaytimes considering these characteristics, we compared the ghost delaytimes estimated with L-1 norm, L-2 norm and kurtosis of the deghosted trace and its autocorrelation on synthetic data. L-1 norm of autocorrelation showed a minimal error and the reflection coefficient was calculated using Kirchhoff approximation equation which can handle the effect of wave height. We applied the estimated ghost delaytimes and the calculated reflection coefficients to remove the source and receiver ghost effects. By removing ghost signals, we reconstructed the frequency components attenuated near the notch frequency and produced the migrated stack section with enhanced temporal resolution.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.523-538
• /
• 1997

In order to investigate TMD prevalence in malocclusion patients and to study its relationship with occlusal factors, 205 malocclusion patients (M67, F138, 6Y1M-46Y8M) were examined. The following examinations were carried out, Questionnaire personal history, TMD symptoms, and the associated factors Clinical examination : TMJ sound and maximum mouth opening Orthopantomogram : condyle abnormalities, length of Co'-Inc' and Co'-Go', ratio Co'- Inc'/ Co'-Go', and depth of antegonial notch Transcranial view limitation of anterior movement of condyle Model Angle classification, overjet, overbite, midline discrepancy, missing of posterior teeth, posterior crossbite, attrition of palatal cusp of maxillary molars, crowding/spacing The results could be summarized as follows, 1. The prevalence of TMD showed that Helkimo Anamestic Inder(Ai) 0 was $46.8\%$, Ai I was $22.0\%$, Ai II was $31.2\%$ and subjective symptoms increased with aging (p<0.001) and were frequent in females (p<0.05). 2. Flattening ($4.4\%$) was the most frequent condyle abnormality on Orthopantomogram, and $8.3\%$ of subjects showed some abnormalities on Orthopantomogram. 3. The cases with neck and shoulder pain (p<0.001), clenching, lip biting (p<0.01), and headache (p<0.05) showed higher scores of Ai. 4. Angle class II showed high frequency of condylar abnormalities on Orthopantomogram, and subjects whose palatal cusp of maxillary molars had been attrided had the tendency to show high hi scores (p<0.05). The other occlusal factors had nothing to do with the symptoms of TMD. 5. In the cases that 1)the value of Co'-Inc', Co'-Go' or Co'-Inc'/Co'-Go' were low or 2)the differences of Co'-Go' or Co'-Inc'/Co'-Go' between the right and the left were large, condylar abnormalities were frequently obserbed on Orthopantomogram.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.947-954
• /
• 2008

The purpose of this research is to find out related factors to obtain the best collar pattern of the women's tailored jacket by analyzing the difference of the shapes between the drafted pattern and that of being stitched. The experimental conditions established are as follows. The position and angle of its break point, the notch and the width of the collar and lapel are kept unchanged. The collar decrease in neckline edge and the top collar larger than the under collar. The crossing point of gorge line is changed to make the collar's roll line straight. When the pattern is changed to make the outline of the lapel straight, the amount of cloth is changed too. According to the experimental conditions, The experimental clothes using muslin were made to. put on the manikin and the suitable methods of making the collar pattern were decided. In order to find out the influence of fabric materials on the jacket' shapes, Three kinds of wool fabrics were used and the results were evaluated. Summary of the research is as follows. When 0.5cm of the neckline edge is shortened, the standing part of the collar has less wrinkles, and its position looks natural and lastly, the material has slightly affected the collar's condition. It is desirable to make the top collar 0.2cm longer than the under collar. But the length should be different according to the fabric material. It it is thick cloth, the length has to be extended. To make the roll line straight, 0.4cm of the crossing point of gorge line should be corrected. The thick cloth needs more correction. To make the lapel's outline straight, it needs outwardly round 0.2cm more and materials make little difference to affect the shape.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.231-237
• /
• 2007

The torque ripple of the hydraulic pumps for the Electro-hydrostatic Actuators can disturb the cylinder position control under slewing speed operation condition. In principle, the periodic change of the reaction torque generated by a piston type pump is highly dependent on the waveform of its cylinder chamber pressure. In case of uni-directional pumps operating at constant speed, the transient overshoot and rising slope of the cylinder pressure can be adjusted by the precompression angle and notch shape of their valve plates. Therefore, the influence of the valve plate geometry on the torque ripple magnitude of a bent-axis type piston pump for EHA application was investigated in this study. The results showed that any improvement of the torque ripple of such a bi-directional pump can not be achieved by modifying the valve plate geometry, regardless of its operation speed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.307-314
• /
• 2004

A circumferential guided wave method was developed to detect the axial crack on the bent feeder pipe. Dispersion curves of circumferential guided waves were calculated as a function of curvature of the pipe. In the case of thin plate, i.e. infinite curvature, as the frequency increases, the $S_0$ and $A_0$ mode coincide and eventually become Rayleigh wave mode. In the case of pipe, however, as the curvature increases, the lowest modes do not coincide even in the high frequencies. Based on the analysis, a rocking technique using angle beam transducer was applied to detect an axial defect in the bent region of PHWR feeder pipe. Based on the analysis of experimenal data for artificial notches, the vibration modes of each signal were identified. It was found that the notches with the depth of )0% of wall thickness can be detected with the method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.