• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.246-252
• /
• 2018

A series of simulated reactivity-initiated accident (RIA) tests on irradiated fully recrystallized boiling water reactor Zircaloy-2 cladding has been performed by means of the expansion-due-to-compression (EDC) test method. The EDC method reproduces fuel pellet-clad mechanical interaction (PCMI) conditions for the cladding during RIA transients with respect to temperature and loading rates by out-of-pile mechanical testing. The tested materials had a large variation in burnup and hydrogen content (up to 907 wppm). The results of the EDC tests showed variation in the PCMI resistance of claddings with similar burnup and hydrogen content, making it difficult to clearly identify ductile-to-brittle transition temperatures. The EDC-tested samples of the present and previous work were investigated by light optical and scanning electron microscopy to study the influence of factors such as azimuthal variation of the Zr-hydrides and the presence of hydride rims and radially oriented hydrides. Two main characteristics were identified in samples with low ductility with respect to hydrogen content and test temperature: hydride rims and radial hydrides at the cladding outer surface. Crack propagation and failure modes were also studied, showing two general modes of crack propagation depending on distribution and amount of radially oriented hydrides. It was concluded that the PCMI resistance of irradiated cladding under normal conditions with homogenously distributed circumferential hydrides is high, with good margin to the RIA failure limits. To further improve safety, focus should be on conditions causing nonfavorable hydride distribution, such as hydride reorientation and formation of hydride blisters at the cladding outer surface.

• Journal of Chest Surgery
• /
• v.21 no.4
• /
• pp.672-680
• /
• 1988

Munro is generally considered the first person to have demonstrated, in 1888, in an infant cadaver, the feasibility of dissection and ligation of a persistently patent ductus arteriosus. In august, 1938, Robert Gross reported first successful division and suture of the patent ductus of 7 year old girl. Interruption of a ductus is one of the most satisfactory and curative operations in the field of surgery for congenital heart disease. Seventy-eight consecutive cases of closure of patent ductus arteriosus were operated from June 1980 to June 1988 in the department of thoracic and cardiovascular surgery in Maryknoll Hospital. Retrospective clinical analysis of the patients were 1. There were 24 males, 54 females. 2. The age range of the patients were from 7 months to 32 years with the mean age 9.8 years. 3. Chief complaints of the patients were frequent URI[70.5%], dyspnea on exertion[36.9%], palpitation[10.3%], but 15 patients[19.2%] had no subjective symptoms. 4. Continuous machinery murmur could be heard at the 2nd or 3rd intercostal space on the left sternal border in 66 patients[84.6%]. The other 12 patients made systolic murmur. 5. Radiographic findings of the Chest P-A were cardiac enlargement in 55 patients[70%], enlargement of pulmonary conus and/or increasing density of pulmonary vascularity in 68 patients[87%]. 6. Electrocardiographic findings of the patients were within normal limit in 23 patients[36%], LVH in 38 patients[48.7%], RVH in 7 patients[9%], biventricular hypertrophy in 5 patients[6%]. 7. Cardiac catheterization performed in 62 patients. Mean Qp/Qs=2.5, mean pulmonary arterial pressure=45 mmHg. 8. 73 patients were operated through left posterolateral thoracotomy: Closure of the ductus by ligation in 64 cases, division with suture in 6 cases, and division with aortopatch in 3 cases. Ligation through median sternotomy under cardiopulmonary bypass were 5 cases. 9. There was no death associated with operation, but one case was experienced with intraoperative tearing of ductus resulting in massive bleeding. The other complications were transient hoarseness in 2 patients, chylothorax in 2 patients.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.235-239
• /
• 2004

Drosophila melanogaster heat shock protein 70 gene promoter (Dhsp70p) is widely used in transgenic insect to drive exogenous gene, and the homologous region 3 from Bombyx mori nucleopolyhedrovirus (BmNPVhr3) functions as an enhancer for several promoters. To test whether BmNPVhr3 can enhance the Dhsp70ps transcriptional activity, the reporter plasmids, which contain the Dhsp70p, the reporter $\beta$-galactosidase gene with SV40 terminator and BmNPVhr3 fragment, are constructed and transfected into the insect cell lines (Bm-N cells and Sf-21 cells) by lipofectin-mediated method. The results from the transient expression assay show that BmNPVhr3 significantly increases transcriptional activity of Dhsp70p both under the normal condition and under the heat-shock treatment, although the effects are significantly different between in Bm-N cells and in sf-21 cells. The enhancing behavior of BmNPVhr3 on the Dhsp70p is in an orientation-independent manner. Meanwhile, the effects of heat-shock treatment on Dhsp70p alone or Dhsp70p/BmNPVhr3 combination present no significant difference, indicating that BmNPVhr3 only enhances the transcriptional activity of Dhsp70p, but cant alter its characteristic of the response to the heat-shock stress. The above results suggest that the Dhsp70p/BmNPVhr3 combination is more effective one to drive exogenous gene for transgene or stable cell expression system in insects.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.347-360
• /
• 1998

Numerical simulations for fluid flow and solute transport in a fracture rock masses are performed by using a transient flow model, which is based on the three-dimensional stochastic and discrete fracture network model (DFN model) and is coupled hydraulic model with mechanical model. In the numerical simulations of the solute transport, we used to the particle following algorithm which is similar to an advective biased random walk. The purpose of this study is to predict the response of the tracer test between two deep bore holes (GPK1 and GPK2) implanted at Soultz sous Foret in France, in the context of the geothermal researches.l The data sets used are obtained from in situcirculating experiments during 1995. As the result of the transport simulation, the mean transit time for the non reactive particles is about 5 days between two bore holes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1103-1108
• /
• 2012

A main steam pipe system is a branch pipe that connects a boiler with a turbine. Water hammering analysis is very important for limiting the damage caused to pipe systems by operation conditions. Water hammering created by an unsteady flow in pipeline systems can cause excessive change in pressure, vibration, and noise. The main steam pipe structure should be designed to safely maintain the pressure pulsation and several vibrations under operation environments. This study evaluated the structural integrity of a main steam pipe during suspended and normal operation by using the ASME fatigue life methodology and finite element analysis. In the analysis, water hammering was used for transient analysis. The calculated alternating stress and fatigue stress were compared with the applicable limits of ASME fatigue life. All the evaluation results satisfied the requirements of the ASME fatigue life.

• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.251-261
• /
• 2006

The objective of this work is to apply artificial neural networks for solving inverse problems in the structural optimization of a fiber optic pressure sensor. For the sensor under investigation to achieve a desired accuracy, the change in the distance between the tips of the two fibers due to the applied pressure should not interfere with the phase change due to the change in the density of the air between the two fibers. Therefore, accurate dynamic analysis and structural optimization of the sensor is essential to ensure the accuracy of the measurements provided by the sensor. To this end, a normal mode analysis and a transient response analysis of the sensor were performed by combining commercial finite element analysis package, MSC/NASTRAN, and MATLAB. Furthermore, a parametric study on the design of the sensor was performed to minimize the size of the sensor while fulfilling a number of constraints. In performing the parametric study, the need for a relationship between the design parameters and the response of the sensor was fulfilled by using a neural network. The whole process of the dynamic analysis using commercial finite element analysis package and the parameter optimization of the sensor were automated within the MATLAB environment.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.320-328
• /
• 2017

In order to analyze the influence on derailment safety according to the aging of primary rubber springs widely applied to railway vehicles, characteristic tests were carried out on aged primary rubber spring samples. To analyze the effect of primary rubber spring aging on derailment safety, a vehicle dynamic analysis was carried out. The results of the vertical characteristics test for the rubber spring specimens with 17 years of service life revealed that the displacement restoration function was degraded due to rubber aging and the spring stiffness significantly increased. The results of the running dynamic analysis simulating the twist track running in accordance with the EN14363 standard, compared with the normal vehicle model (Case 1), showed that the derailment coefficient and the wheel unloading of the vehicle model (Case 2) using the aging primary spring characteristic increased, and the derailment safety was degraded. IN particular, it was found that the derailment safety due to the reduction of the wheel load is weak in the transient section where a steep slope change occurs.

• Nuclear Engineering and Technology
• /
• v.22 no.1
• /
• pp.66-74
• /
• 1990

The thermal-hydraulic characteristics of the 17$\times$17 OFA (Optimized Fuel Assembly) used in the KNU 7&8 are analyzed and compared with that of the 17$\times$17 SFA (Standard Fuel Assembly) loaded in the KNU 5&6. The thermal-hydraulic characteristics analyzed are minimum DNBR, fuel centerline temperature and exit void fraction at normal operation and design over power transient. Additionally, local linear rod power, which will cause fuel centerline melting, is calculated. The DNBR sensitivity calculations are performed with respect to the reactor operating parameters. COBRA-IV-I code is used for these calculations. The modified W-3 correltion and the drift-flux model are applied for the critical heat flux calculation and the void fraction calculation, respectively. From the calculated results, it has been found that the possibility of DNB occurrence is higher in the OFA than in the SFA. The other hand, the local linear power resulting in fuel centerline moiling of the OFA is nearly equal to that of the SFA.

• Korean Journal of Acupuncture
• /
• v.36 no.1
• /
• pp.52-62
• /
• 2019

Objectives : The objective of this study was to investigate the effects of Zingiberis Rhizoma Pharmacopuncture(ZP) at GB30 and ST36 in neuropathic pain induced SD rats by the block of Transient Receptor Potential Vanilloid 1(TRPV1). Methods : Neuropathic pain in rats was induced by tibial and common peroneal nerve transection of right leg. The rat subjects were divided into 6 groups : normal(Nor, n=5), control(Con, n=5), neuropathic pain plus 2 mg/kg ZP injection at GB30 and ST36(ZP-A, n=5), 10 mg/kg ZP(ZP-B, n=5), 20 mg/kg ZP(ZP-C, n=5) and 0.45 mg/kg Tramadol(Tra, n=5). Three days after the surgery, injections were administered once a day for 17 days. Withdrawal response of neuropathic rats' legs were measured by stimulating the paw of Right leg with von frey filament, acetone and radient heat on day 3, 7, 11, 15, 19 after surgery. After all treatments were completed, c-Fos in the midbrain central gray and TRPV1 & TRPA1 of DRG(L5) were analyzed. Results : Groups ZP-B and ZP-C showed a meaningful decrease in the withdrawal response of mechanical allodynia, thermal hyperalgesia and cold allodynia compared to the control group(p<0.05, p<0.01, p<0.001). Groups ZP-B and ZP-C showed a meaningful decrease in the expression of c-fos and TRPV1 protein level compared to the control group(p<0.05, p<0.01, p<0.001). Conclusions : These results suggest that Zingiberis Rhizoma Pharmacopuncture at GB30 and ST36 could decrease mechanical & cold allodynia and thermal hyperalgesia by block the TRPV1 on the model of neuropathic pain.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.338-341
• /
• 2014

Recently, many research efforts have paid attention to spectrum pooling meshanism that provides efficient way to manage transient spectrum requests of secondary users in cognitive radio networks. Spectrum pooling is maintained by WSP (wireless service provider). WSP leases the spectrums stored in her spectrum pool to secondary users with being paid for it. It is natural that WSP tries to get profits as much as possible, which implies the WSP tries to minimize the cost required for maintaining her spectrum pool. In this paper, we model the spectrum pool into a probabilistic inventory model. Assuming secondary users' spectrum requests follow normal distribution, we give a strategic way that minimizes the maintenance cost of the spectrum pool. By a series of simulations, we show that WSP can reduce the total maintenance cost through our inventory model-based spectrum pooling than maintaining fixed inventory level.