• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.295-300
• /
• 2010

Metal bipolar plate applied to Polymer Electrolyte Membrane Fuel Cell is getting most attractive due to their good feasibility of mass production and low cost. But it is one of the immediate causes of performance decline because it is difficult to reduce channel pitch of metal bipolar plate. In this study, mesh was inserted in between bipolar plate and GDL to obtain uniform contact pressure without reducing channel pitch. The section measuring and performance test were carried out to confirm the mesh structure distributes contact pressure equally in reacting area. The performance of 3 type mesh structures developed in this study were higher than the normal cell at all over the current range. Especially, it showed that the mesh cell performance was increased and pressure drop was decreased with diminishing mesh gap size. The Mesh structure was more sensitive to humidification and contact pressure change than the normal cell.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.57-72
• /
• 1999

Traditional theories of the tensile failure of paper have assumed that uniform strain progresses throughout the sheet until an imperfection within the structure causes a catastrophic break. The resistance to tensile elongation is assumed to be elastic , at first, throughout the structure, followed by an overall plastic yield. However, linear image strain analysis (LISA) has demonstrated that the yield in tensile loading of paper is quite non-uniform throughout the structure, Traditional theories have failed to define the flaws that trigger catastrophic failure. It was assumed that a shive or perhaps a low basis weight area filled that role. Studies of the fracture mechanics of paper have typically utilized a well-defined flaw around which yield and failure could be examined . The flaw was a simple razor cut normal to the direction of tensile loading. Such testing is labeled mode I analysis. The included fla in the paper was always normal to the tensile loading direction, never at another orientation . However, shives or low basis weight zones are likely to be at random angular orientations in the sheet. The effects of angular flaws within the tensile test were examined. The strain energy density theory and experimental work demonstrate the change in crack propagation from mode I to mode IIas the initial flaw angle of crack propagation as a function of the initial flaw angle is predicted and experimentally demonstrated.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2173-2180
• /
• 1995

This paper presents free vibration analysis method using the characteristics of the rotationally periodic structures and includes the analysis results of a tire as an example. The normal modes of the rotationally periodic structures are the kind of standing waves, so all sectors have the same deflection shapes, and only different phases. This property makes it possible to derive the analysis method called sector method. The sector method can give the accurate natural frequencies and the corresponding mode shapes of the rotationally periodic structure with information of only one sector. When the free vibration analysis is performed to find the dynamic characteristics of the rotationally periodic structure by using the sector method, the computer memory spaces and the CPU times can be saved. We obtained much economic benefits by using the sector method in the analysis of dynamic characteristics of a tire made of non-linear materials.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.112-117
• /
• 2002

메탄-공기의 비예혼합 대향류 확산화염 차폐가스가 화염구조에 미치는 영향을 수치적으로 조사하였다. 20 $s^{-1}$의 저변형율, 메탄가스 19%와 질소 79%의 혼합가스 연료와 공기의 확산화염을 대상으로 하였다. 질소차폐가스의 속도의 차폐가스의 유무에 따른 화염의 형태와 중심선상의 온도 및 축방향 속도의 분포를 비교하였다. 정상중력에서 $V_{S}/V_{F}{\leq}2$일 때 차폐가스의 유동이 화염구조에 미치는 영향은 무시할 수 있었다. 정상중력에서 차폐가스가 없는 경우의 화염형태와 그 위치는 차폐가스가 있는 경우와 다르지만, 무중력에서는 중심선상에서 차폐가스의 영향이 거의 없었다.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.175-183
• /
• 2020

Fly ash has become an important component of concrete as supplementary cementitious material with the development of concrete technology. To make use of fly ash efficiently, four types of fly ash with particle size distributions that are in conformity with four functions, namely, S.Tsivilis, Andersen, Normal and F distribution, respectively, were prepared. The four particle size distributions as functions of the strength and pore structure of concrete were thereafter constructed and investigated. The results showed that the compressive and flexural strength of concrete with the fly ash that conforming to S.Tsivilis, Normal, F distribution increased by 5-10 MPa and 1-2 MPa, respectively, compared to the reference sample at 28 d. The pore structure of the concrete was improved, in which the total porosity of concrete decreased by 2-5% at 28 d. With regarding to the fly ash with Andersen distribution, it was however not conducive to the strength development of concrete. Regression model based on the grey multiple linear regression theory was proved to be efficient to predict the strength of concrete, according to the characteristic parameters of particle size and pore structure of the fly ash.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.69-75
• /
• 2014

서울지역 28개 지하구조물에 대한 정밀안전진단 결과를 활용하여 제안된 균열집중구간 및 탄산화 기반 한계상태함수를 산정하여 우선적인 보수구간을 선별하고자 하였다. 상태평가를 위해 분할된 503개 쉬트에 대한 균열밀도는 로그정규분포, 탄산화 및 피복은 정규분포의 현장조사 결과를 얻었다. 각 구간별 실시한 강도, 초음파속도, $CO_2$농도, 철근부식도, 염화물함유량 등을 고려할 수 있도록 환경지수를 도입하여 합리적인 보수 우선순위를 제안하고자 하였다.

• 한국CDE학회논문집
• /
• 제2권2호
• /
• pp.77-84
• /
• 1997

This paper is concerning the development of multiple neural networks system of problem domains where the complete input space can be decomposed into several different regions, and these are known prior to training neural networks. We will adopt oblique decision tree to represent the divided input space and sel ect an appropriate subnetworks, each of which is trained over a different region of input space. The overall architecture of multiple neural networks system, called the federated architecture, consists of a facilitator, normal subnetworks, and tile networks. The role of a facilitator is to choose the subnetwork that is suitable for the given input data using information obtained from decision tree. However, if input data is close enough to the boundaries of regions, there is a large possibility of selecting the invalid subnetwork due to the incorrect prediction of decision tree. When such a situation is encountered, the facilitator selects a tile network that is trained closely to the boundaries of partitioned input space, instead of a normal subnetwork. In this way, it is possible to reduce the large error of neural networks at zones close to borders of regions. The validation of our approach is examined and verified by applying the federated neural networks system to the configuration design of a midship structure.

• 대한화학회지
• /
• 제55권2호
• /
• pp.251-255
• /
• 2011

3,4,5-Trimethoxybenzaldehyde과 p-nitrotoluene을 출발물질로 하여 두 단계 반응으로 (E)-4'-amino-3,4,5-trimethoxystilbene을 합성할 수 있는 합성 방법을 개발하였으며, 이 화합물에 대한 결정 구조를 X-ray 회절분석법으로 결정하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.610-615
• /
• 2003

This experiment has been carried out to find the structure of turbulent boundary layer with instantaneous velocity fields obtained in stream-wall-normal planes using a stereo-PIV (Particle Image Velocimetry) method. And it has been measured perpendicular plane and horizontal plane with hairpin vortex structure by Reynolds number change and made third dimension shape for section of horizontal plane through stereo-PIV. In the outer layer hairpin vortices occur in streamwise-aligned packets that propagate with small velocity dispersion. A streaky structure is composed of counter-rotating vortex. According as y+ increases, streaky structure's interval space decrease, and it shows that hairpin shape of prior research is vertified. The objective of the present research is to gain a better understanding of coherent structures in the outer of wall turbulence by experimentally examining coherent structures.

• BMB Reports
• /
• 제40권2호
• /
• pp.232-238
• /
• 2007

The p13 gene is uniquely present in Group II nucleopolyhedroviruses (NPVs) and some granuloviruses, but not in Group I NPVs. p13 gene was first described by our laboratory in Leucania separatamultiple nuclear polyhedrosis virus (Ls-p13) in 1995. However, the functions of Ls-P13 and of its homologues are unknown. When Ls-p13 was inserted into Autographa californica nucleopolyhedrovirus, a Group I NPV, polyhedra yield was inhibited. However, this inhibition was prevented when the leucine zipper-like domain of Ls-p13 was mutated. To determine the cause of this marked difference between Ls-P13 and leucine zipper mutated Ls-P13 (Ls-P13mL), oligomerization and secondary structure analyses were performed. High performance liquid chromatography and yeast two-hybrid assays indicated that neither Ls-P13 nor Ls-P13mL could form oligomers. Informatics and circular dichroism spectropolarimetry results further indicated marked secondary structural differences between Ls-P13 and Ls-P13mL. The LZLD of Ls-P13 has two extended heptad repeat units which form a hydrophobic surface, but it is short of a third hydrophobic heptad repeat unit for oligomerization. However, the mutated LZLD of Ls-P13mL lacks the above hydrophobic surface, and its secondary structure is markedly different. This difference in its secondary structure may explain why Ls-P13mL is unable to inhibit polyhedra yield.