• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.39-45
• /
• 2008

A levitation rail is placed on the top of track structure to operate Maglev vehicles and a part of track that link up with a sleeper is applied repeated load in Maglev vehicles operation. This paper aimed to verify validity of design for levitation rail, through the fatigue analysis about load which is applied to levitation rail in Maglev vehicles operation and impact load occurring in an emergency landing. Load conditions applied design load(23kN/m) in normal operation and skid drop load(24kN/m) in vehicle drop. And boundary conditions are consider bolt fixing and welding. Through static analysis, weak point and maximum stress of levitation rail could be obtained. S-N(stress-life) method was used in oder to predict fatigue life, and Goodman relationship was applied to consider a effect of mean stress. Also damage was calculated by using Miner's. As a result of fatigue analysis, levitation rail had a fatigue life which was more than requirement ($10^6$cycle) in all analysis conditions. Assumption that $10^8{\sim}10^9$cycles is infinite life, all analysis conditions had infinite life except a case under drop load and bolt fixing($1.21{\times}10^6$).

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.250-258
• /
• 1980

Various radicals may add to isonitriles to give imidoyl radcals RN=CR'. This may be also generated via abstraction of imidoyl hydrogen from imine in the following manner: RN=CR' ＋ R"${\cdot}{\rightarrow}$ RN=CR' ＋ R"-H Imidoyl radicals would be stabilized via two pathways, ${\beta}$-cleavage and atom transfer reactions. ${\beta}$-Cleavage may occur in two directions depending upon structure of the radicals. Cyanide transfer and the "so-called" normal ${\beta}$-cleavage are the two modes of ${\beta}$-cleavage. Addition of t-butoxy radical to t-butyl isocyanide 7 generates an imidoyl radical t-Bu-N=C-O-Bu-t, which undergoes ${\beta}$-cleavage to give t-butyl isocyanate and t-butyl radical. Addition of phenyl radical to 7 forms the intermediate radical t-Bu-N=$C-C_6H_5$, which decomposes to give benzonitrile and t-butyl radical. The t-butyl radical generated from the ${\beta}$-cleavage adds to 7 giving the radical t-Bu-N=C-Bu-t, which cleaves only to pivalonitrile and t-butyl radical, inducing radical chain isomerization. Trimethylsilyl radical adds to 7 to give the intermediate t-Bu-N=$C-Si(CH_3)_3$, which collapses to $(CH_3)_3$SiCN and a t-butyl radical.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.237-244
• /
• 2017

Magnetic flux ropes, often observed during intervals of interplanetary coronal mass ejections, have long been recognized to be critical in space weather. In this work, we focus on magnetic flux rope structure but on a much smaller scale, and not necessarily related to interplanetary coronal mass ejections. Using near-Earth solar wind advanced composition explorer (ACE) observations from 1998 to 2016, we identified a total of 309 small-scale magnetic flux ropes (SMFRs). We compared the characteristics of identified SMFR events with those of normal magnetic cloud (MC) events available from the existing literature. First, most of the MCs and SMFRs have similar values of accompanying solar wind speed and proton densities. However, the average magnetic field intensity of SMFRs is weaker (~7.4 nT) than that of MCs (~10.6 nT). Also, the average duration time and expansion speed of SMFRs are ~2.5 hr and 2.6 km/s, respectively, both of which are smaller by a factor of ~10 than those of MCs. In addition, we examined the geoeffectiveness of SMFR events by checking their correlation with magnetic storms and substorms. Based on the criteria Sym-H < -50 nT (for identification of storm occurrence) and AL < -200 nT (for identification of substorm occurrence), we found that for 88 SMFR events (corresponding to 28.5 % of the total SMFR events), substorms occurred after the impact of SMFRs, implying a possible triggering of substorms by SMFRs. In contrast, we found only two SMFRs that triggered storms. We emphasize that, based on a much larger database than used in previous studies, all these previously known features are now firmly confirmed by the current work. Accordingly, the results emphasize the significance of SMFRs from the viewpoint of possible triggering of substorms.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.91-99
• /
• 1999

A high-resolution seismic profile acquired across the northeastern boundary of the Pungam Basin, one of the Cretaceous sedimentary basins in Korea, has been interpreted to delineate subsurface geological structures across the basin boundary. We identified boundary faults and unconformity surfaces of the basin and divided sediment body into three seismic depositional units (Units I, II, and III from youngest to oldest). Inferred from fault geometry and type, northeastern part of the Pungam Basin has been formed by a strike-slip fault whereas the normal faults near the boundary were formed by transtensional movement along a fault zone. A 350-400 m thick sediment layer is overlying the Precambrian gneiss. Bedding planes of Unit III are dipping westward and are closely related to an anticline in the acoustic basement. Unit II is also tilted westward, suggesting that the eastern part of the fault zone was uplifted after deposition of lower part of the sedimentary body. Afterward, the uplifted sediment layers were eroded and transported to the western part of the basin. Chaotic reflection pattern of sedimentary Units II and III may suggest that strike-slip movement along the fault zone deformed basin-filled sediments.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.190-200
• /
• 2002

Purpose; The purpose of this study was to develop an instrument to measure sexual satisfaction in Korean adults. Method: Development of items for the instrument was done by a collecting, reorganizing, reducing and selecting process based on the literature. A total of 19 items were selected in this process. For evaluation of the appropriateness of the 19 items, questionnaires were given to an expert group consisting of 18 professionals (7 men and 11 women). Eighteen items having a response of 70% in 'very good' item or 'good' item were included as items for the instrument. With these 18 items, a 5 point Likert scale was developed, and reliability and validity tests of the scale were done. The subjects for the test were 1,127 Korean adults living in 11 areas in Korea, Data were collected from Dec. 1, 2000 to Feb. 28, 2001 and analyzed with SPSS/PC+ 10.0 program. Item analysis and factor analysis were used to assess the reliability and validity of the scale. Chronbach alpha and corrected item-total correlation were obtained to verify internal consistency, and principal component analysis with the varimax rotation was used to identify structure validity of the developed tool. Result: Reliability of the scale was .9503 and corrected item-total correlations of the items were distributed from .5208 to 7899. As a result of the factor analysis, the items were categorized into three factors. The cumulative variance of the three factors was 67.1%, and all of the variances of the factors were above 5%. Because factor 1 (8 items) indicated a special feeling of psychological satisfaction with sexual activity, it was named 'psychological factor'. Factor 2 (8 items) indicated a feeling of satisfaction in the interaction with sexual partner through communication and variation, therefore it was named 'interactional factor'. Factor 3 (2 items) was about the frequency and duration of sexual intercourse and indicated physical dimensions of satisfaction, so it was named 'physical factor'. The average score for sexual satisfaction of the 1,127 subjects was 65.32 (${\pm}12.71$), and histogram of the score showed a normal distribution with skewness - .425. Conclusion: Finally, a Korean Sexual Satisfaction Scale(KSSS) was accepted as a 5 point Likert scale with 18 items after the statistical test for reliability and validity. In conclusion, KSSS is a useful instrument which is valid and reliable can be used to understand the sexuality of Korean adults.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.955-962
• /
• 2005

Still no accurate theory exists for predicting ultimate shear strength of deep reinforced concrete beams because of the structural and material non-linearity after cracking. Currently, the load capacity assesment is performed for the upper structure of the bridges and containing non-reliability in the applications and results. The purpose in this study is to evaluate analytically the complex shear behaviors and normal strength for the reinforced concrete deep beams and to offer the accuracy load capacity assesment method based on the reliability theories. This paper presents a method for the load capacity assesment of reinforcement concrete deep beams using nonlinear finite element analysis. A computer program named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. Material non-linearity is taken Into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. From the results, determine the reliability index for the failure base on the Euro Code. Then, calculate additional reduction coefficient to satisfy the goals from the reliability analysis. The proposed numerical method for the load capacity assesment of reinforced concrete deep beams is verified by comparison with the others methods.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1353-1366
• /
• 2015

These days Shewhart control chart for evaluating stability of the process is widely used in various field. But it must follow strict assumption of distribution. In real-life problems, this assumption is often violated when many quality characteristics follow non-normal distribution. Moreover, it is more serious in multivariate quality characteristics. To overcome this problem, many researchers have studied the non-parametric control charts. Recently, SVDD (Support Vector Data Description) control chart based on RBF (Radial Basis Function) Kernel, which is called K-chart, determines description of data region on in-control process and is used in various field. But it is important to select kernel parameter or etc. in order to apply the K-chart and they must be predetermined. For this, many researchers use grid search for optimizing parameters. But it has some problems such as selecting search range, calculating cost and time, etc. In this paper, we research the efficiency of selecting parameter regions as data structure vary via simulation study and propose a new method for determining parameters so that it can be easily used and discuss a robust choice of parameters for various data structures. In addition, we apply it on the real example and evaluate its performance.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.129-142
• /
• 2002

Epithelial-mesenchymal interaction plays a important role in cell growth and differentiation. This interaction is already well known to have an importance during the organ development as well as cell growth and differentiation. However, in vitro experimental model is not well developed to reproduce in vivo cellular microenvironment which provide a epithelial-mesenchymal interaction. Because conventional monolayer culture lacks epithelial-mensenchymal interaction, cultivated cells have an morphologic, biochemical, and functional characteristics differ from in vivo tissue. Moreover, it's condition is not able to induce cellular differention due to submerged culture condition. Therefore, the aims of this study were to develop and evaualte the in vitro experimental model that maintains epithelial-mesenchymal interaction by organotypic raft culture, and to characterize biologic properties of three-dimensionally reconstituted oral keratinocytes by histological and immunohistochemical analysis. The results were as follow; 1. Gingival keratinocytes reconstituted by three-dimensional organotypic culture revealed similar morphologic characteristics to biopsied patient specimen showing stratification, hyperkeratinosis, matutation of epithelial architecture. 2. Connective tissue structure was matured, and there is no difference during stratification period of epithelial 3-dimensional culture. 3. The longer of air-exposure culture on three-dimensionally reconstituted cells, the more epithelial maturation, increased epithelial thickness and surface keratinization 4. In reconstitued mucosa, the whole epidermis was positively stained by anti-involucrin antibody, and there is no difference according to air-exposured culture period. 5. The Hsp was expressed in the epithelial layer of three-dimensionally cultured cells, especially basal layer of epidermis. The change of Hsp expression was not significant by culture stratification. 6. Connexin 43, marker of cell-cell communication was revealed mild immunodeposition in reconstitued epithelium, and there is no significant expression change during stratification. These results suggest that three-dimensional oragnotypic co-culture of normal gingival keratinocytes with dermal equivalent consisting type I collagen and gingival fibroblasts results in similar morphologic and immunohistochemical characteristics to in vivo patient specimens. And this culture system seems to provide adequate micro-environment for in vitro tissue reconstitution. Therefore, further study will be focused to study of in vitro gingivitis model, development of novel perioodntal disease therapeutics and epithelial-mensenchymal interaction.

• Journal of The Korean Astronomical Society
• /
• v.47 no.2
• /
• pp.77-86
• /
• 2014

Using a cosmological ${\Lambda}CDM$ simulation, we analyze the differences between the widely-used spin parameters suggested by Peebles and Bullock. The dimensionless spin parameter ${\lambda}$ proposed by Peebles is theoretically well-justified but includes an annoying term, the potential energy, which cannot be directly obtained from observations and is computationally expensive to calculate in numerical simulations. The Bullock's spin parameter ${\lambda}^{\prime}$ avoids this problem assuming the isothermal density profile of a virialized halo in the Newtonian potential model. However, we find that there exists a substantial discrepancy between ${\lambda}$ and ${\lambda}^{\prime}$ depending on the adopted potential model (Newtonian or Plummer) to calculate the halo total energy and that their redshift evolutions differ to each other significantly. Therefore, we introduce a new spin parameter, ${\lambda}^{\prime\prime}$, which is simply designed to roughly recover the value of ${\lambda}$ but to use the same halo quantities as used in ${\lambda}^{\prime}$. If the Plummer potential is adopted, the ${\lambda}^{\prime\prime}$ is related to the Bullock's definition as ${\lambda}^{\prime\prime}=0.80{\times}(1+z)^{-1/12}{\lambda}^{\prime}$. Hence, the new spin parameter ${\lambda}^{\prime\prime}$ distribution becomes consistent with a log-normal distribution frequently seen for the ${\lambda}^{\prime}$ while its mean value is much closer to that of ${\lambda}$. On the other hand, in case of the Newtonian potential model, we obtain the relation of ${\lambda}^{\prime\prime}=(1+z)^{-1/8}{\lambda}^{\prime}$; there is no significant difference at z = 0 as found by others but ${\lambda}^{\prime}$ becomes more overestimated than ${\lambda}$ or ${\lambda}^{\prime\prime}$ at higher redshifts. We also investigate the dependence of halo spin parameters on halo mass and redshift. We clearly show that although the ${\lambda}^{\prime}$ for small-mass halos with $M_h$ < $2{\times}10^{12}M_{\odot}$ seems redshift independent after z = 1, all the spin parameters explored, on the whole, show a stronger correlation with the increasing halo mass at higher redshifts.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.201-213
• /
• 2017

Water is removed from crude oil containing water by using oil separator. This study aims to develop a three-dimensional (3D) Eulerian computational fluid dynamics (CFD) model to predict the separation efficiency of air-water-oil separator. In the incompressible, isothermal and unsteady-state CFD model, air is defined as continuous phase, and water and oil are given as dispersed phase. The momentum equation includes the drag force, lift force and resistance force of porous media. The standard k-${\varepsilon}$ model is used for turbulence flow. The exit pressures of water and oil play an important role in determining the liquid level of the oil separator. The exit pressures were identified to be 6.3 kPa and 5.1 kPa for water and oil, respectively, to keep a liquid level of 25 cm at a normal operating condition. The time evolution of volume fractions of air, water and oil was investigated. The settling velocities of water and oil along the longitudinal separator distance were analyzed, when the oil separator reached a steady-state. The oil separation efficiency obtained from the CFD model was 99.85%, which agreed well with experimental data. The relatively simple CFD model can be used for the modification of oil separator structure and finding optimal operating conditions.