• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.70-75
• /
• 2000

After the patterning and probe process of wafer have been achieved, the dicing process is necessary to separate chips from a wafer. The dicing process cuts a wafer to lengthwise and crosswise direction to make many chips by using narrow circular rotating diamond blade. But inferior goods are made under the influence of complex dicing environment such as blade, wafer, cutting water and cutting conditions. This paper describes a monitoring algorithm using feature extraction in order to find out an instant of vibration signal change when bad dicing appears. The algorithm is composed of two steps: feature extraction and decision. In the feature extraction, two features processed from vibration signal which is acquired by accelerometer attached on blade head are proposed. In the decision. a threshold method is adopted to classify the dicing process into normal and abnormal dicing. Experiment have been performed for GaAs semiconductor wafer. Based upon observation of the experimental results, the proposed scheme shown a good accuracy of classification performance by which the inferior goods decreased from 35.2% to 12.8%.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.71
• /
• pp.1-36
• /
• 2016

Unlike continental European legal systems (civil law systems), specific performance in common law refers to an equitable remedy requiring exactly the performance that was specified in a contract. It usually granted only when money damages would be an inadequate remedy and the subject matter of the contract is unique. Thus, under common law specific performance was not a remedy, with the rights of a litigant being limited to the collection of damages. Consistent with the practice in civil law jurisdictions, United Nations Convention on Contracts for the International Sale of Goods (CISG) makes specific performance the normal remedy for breach of a contract for the sale of goods. Therefore, the buyer may require a breaching seller to deliver substitute goods or to make any reasonable repair. Likewise, the sellermay require the buyer to taker delivery of goods and pay for them. Despite this, Article 28 of the CISG restricts the availability of specific performance where it would be unavailable under the domestic law of the jurisdiction in which the court is located. Thus, the CISG's more liberal policy toward specific performance is restricted by common law. There are some legal issues in CISG's specific performance availability by Article 28. This paper analyzes these issues as interpreting Article 28 of CISG, by examining various theories of application to actions for specific performance and comparing CLOUT cases involving CISG Article 28.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.55
• /
• pp.95-124
• /
• 2012

Referring to Buyer's obligations, the Buyer must pay the price for the goods and take delivery of them as required by the contract. There are vital importances to the Buyer's Fundamental Breach. The legal effects of a breach of contract do not depend on the nature of the obligation broken, but on the consequences of the breach the detriment to the other party. The obligations mentioned to Article 53 are primary obligations which are to be fulfilled in the normal performance of the contract. They include a number of different acts which could be seen as the subject-matter of different obligations. CISG gives further details for the payment of the price in Articles 54 to 59 and for taking delivery in Article 60. The buyer has to take delivery at the respective place within a reasonable period after this communication since he cannot be required to take delivery immediately. Refusing to take delivery in case of delay not constituting a ground for avoiding the contract makes no sense, since this would lead to even later delivery. For the understanding of Buyer's Fundamental Breach, We need to search the Cases referring to the breach of buyer's main obligations.

• 대한한약학회:학술대회논문집
• /
• 2007.11a
• /
• pp.129-144
• /
• 2007

In order for stable demand-supply and regularity of distribution, "The regulations for management of demand-supply and distribution of medicinal herbs" were established on 1995. Therefore, the medicinal herbs of good quality have been controled to be distributed in the market. However, to be wide of the purpose, the standardized sound distribution system was caused due to the governmental control on demand-supply to protect domestic farmers who produce the material for medicinal herbs, which results in the over distribution of non-standardized or illegally imported medicinal herbs. In addition, because of the distribution of faulty or poor medicinal herbs, there are chances of affecting bad effects on public health. The standardized medicinal herbs cover 514 different kinds in total, of which 69 products are specified to be standardized in the oriental medicine product companies. Also, in order to protect farmers who produce the materials for medicinal herbs, the amount of imported materials are regulated in normal times. The 14 different materials for medicinal herbs, which are allowed to be imported to a certain amount only when the shortage of goods or sudden rise of prices is to happen, are frequently introduced into domestic market as food not as medical usage, and the origin of those illegally changes to home cropped one for the distribution in the market. In addition, the system of distribution are to be disordered and the condition for the distribution of medicinal herbs of good quality can not be made since they illegally changes the usage of the materials for medicinal herbs from their original one and can not be regulated by the domestic laws.

• Journal of Distribution Science
• /
• v.19 no.10
• /
• pp.43-54
• /
• 2021

Purpose: The restrictions posed by the COVID-19 pandemic have affected the normal functioning of the economy. A country like India is facing a lot of concerns in all its sectors especially, in its fiscal system. This paper makes an attempt to examine the impact of COVID-19 first wave on Goods and Service Tax revenue collection and distribution in India and also studies the impact of COVID-19 first wave on the state wise GST revenue of the country. Research Design, Data and Methodology: Our study is based on published GST revenue data. Tools such as Paired Sample t-test, Wilcoxon signed rank test are employed to analyze the data. Results: Our results provide evidence that there is a sharp decline in the GST revenue in the months after the lockdown announcement. The large states show no significance impact of COVID-19 pandemic on GST collection. Whereas, small states like Manipur and Goa show significant difference in GST revenue collection & distribution between the pre and post lockdown period. Conclusion: The outcome of this study will help the policymakers to analyze the extent of the GST revenue loss to the government treasury and will allow them to take appropriate measures in the future.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.7-14
• /
• 2015

This study suggests basic data for fire-resistant compartments to prevent fires from spreading in a traditional markets. As representative combustible goods handled in traditional markets, bedding and bags were chosen. The fire loads could be calculated using the porosity of the materials based on a standard normal distribution. The bedding and bag porosity were 98.7%, and 94.39%, respectively. The the fire load of bedding is $29.9kg/m^2$, and that of bags is $65.61kg/m^2$.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.657-664
• /
• 2020

We investigate the impact of roads and highways within the provinces on the regional trade of China using the augmented Gravity Model and theory of modeling trade. We take a panel data covering 31 provinces of China over 20 years period (1998-2017) for the estimations. We apply ARMA-OLS model, fixed and random effects, and robust findings by Hausman test. The results imply that road and highway lengths within the provinces have a significantly positive impact on the value of the province-wise exports. The positive impact is due to the fact the increased coverage of roads and highways increase accessibility to resources and mobility of goods and services within the regions. Moreover, employment in the transportation sector, per capita GDP and population of the provinces also illustrate positive and significant influence on regional exports and trade. The impact of China's WTO accession on regional exports has been positive, while the financial crisis has had a negative impact. The year dummies show that, in the years following the financial crisis, China was able to regress from the external shock as trade within the provinces increased. The increase in exports after financial crisis is mainly due to the government policies and support to every province.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.111-121
• /
• 2006

The aim of this study was to investigate the possibility of producing goods evaluating the preservation of DSG, PSG, DST and PST, all of which were the most preferred according to the results of sensory evaluation of some sauces made of Demi-glace sauce and a Teriyaki-applied sauce. The pH of normal Demi-glace sauce, at 5.2, was the highest among these sauces. The Teriyaki-applied Demi-glace sauce was the second with pH 5.12 DSG was the lowest. The pH didn't change significantly according to preservation. However, the degree of PSG's pH was lowered by the time period of preservation. DGST didn't changed a lot apart from being a bit morewatery (12.40) after three-week storage. It seemed that the viscosity of the normal sauces, checked after 10 sec, decreased. At 20 sec there were no differences among these sauces. After making 10 applied sauces and evaluating them, DSG, PSG, DST and PST gained the highest preference and the application of Teriyaki sauce was evaluated favorably. According to the preservation test. the sensory evaluation didn't seem to decrease within 2 weeks which demonstrated that the other physicochemical products were unaffected. Therefore, an improvement following more than two-week preservation is expected in t case of rigid store regulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.9-16
• /
• 2017

This study describes the development of a 1-inch cryogenic glove valve for an LNG pumping system and localization development achieved through the performance test. The cryogenic valve used in the LNG pumping system plays an important role in maintaining a flow rate by LNG transportation. This trial manufactured goods, which was achieved through reverse engineering and developing the assembly process. The result of the leak test satisfied the internal pressure condition using the 78-bar normal temperature test and maintained the anti-leakage condition. Also, the result of the cryogenic leak test (BS 6364: low temperature test procedure) maintained anti-leakage at -196 and 52 bar, which satisfied the test standards.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.66
• /
• pp.219-240
• /
• 2015

Developing countries have faced serious difficulties in implementing customs procedures. For example, they have experienced heavy administrative constraints such as lack of qualified personnel and non-computerization. Some importers in developing countries have tried to undervalue or overvalue the imported goods and misclassify them with the target of lowering the incidence of customs duties. In order to address these problems many of developing countries often require the exporter to get a Clean Report of Findings(CRF) issued by a preshipment inspection entity. This study tries to reply to the following questions with which the exporters are faced in the process of issuance of CRF. First, what are the provisions and regulations that the exporters have to note in the event a CRF is issued by the inspection entity? Second, how do the exporters safeguard their own rights in case of price verification? Third, how to protect the confidential business information to be submitted by the exporters in order to get a CRF? Fourth, how can the exporters respond to the improper conducts that the inspection entities have done?