• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.602-606
• /
• 2014

In this study, we observed changes in the physical properties of norbornene dialkyl ester applied to a PVC. The PVC specimens were prepared by blending PVC, norbornene dialkyl ester and stabilizers. Then, the hardness, tensile strength, elongation, tearing strength, transmittancy, haze and yellowness index of these specimens were measured, and were compared with DOP. The hardness of compounds except dicyclohexyl-5-norbornene-2,3-dicarboxylate (DCHN) were an equal to or higher than that of DOP. The tearing strength and tensile characteristic of DCHN could not be analyzed due to its high hardness. Tensile properties such as the tensile strength and elongation were improved for six compounds except diisononyl-5-norbornene-2,3-dicarboxylate (DINN). All compounds measured showed better tearing strength and transmittancy than those of DOP. Also all norbornene derivatives except DDN showed good haze indices. The yellowness index of DON and DPN showed similar values as DOP.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.259-264
• /
• 2016

In this study, we applied six different norbornene dialkyl esters as a plasticizer to an isoprene rubber (IR) and evaluated replaceability of DEHP which is an endocrine disruptor. IR test sheets were prepared by blending IR, norbornene dialkyl ester, vulcanizing agent, etc. and processing properties of the IR were evaluated by measuring Toque, scorch time, cure time and mooney viscosity. Mechanical properties of IR test sheet including hardness, tensile strength, 100% modulus and elongation were also measured and the physical properties of norbornene dialkyl ester applied as a plasticizer were compared to those using DEHN. Both the maximum and minimum toque for the norbornene dialkyl ester as a plasticizer were similar to those of using DEHP. In addition, the scorch and cure time of the former were slightly longer than those of the latter. The mooney viscosity for the case of DEHN was slightly lower than that of the latter. DEHN was also superior to DEHP in terms of processing. The hardness and thermal properties of all IR test sheets were measured to be similar to each other. The linear alkyl chain of norbornene compounds also exhibited good tensile characteristics.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.185-190
• /
• 2007

Poly(norbornene dimethyl dicarboxylate)s, (PNDMD)s, were prepared by addition polymerization with palladium(II) catalyst from pure exo-monomers, and their structure and properties were compared with those of poly(norbornene dicarboxylic acid dialkyl ester)s, (PNDADA)s. Both polymer series exhibited good solubility in general organic solvents and excellent thermal stability up to $330^{\circ}C$. Wide-angle X-ray scattering (WAXS) study indicated the presence of nano-scale layer-like order in amorphous PNDADAs, while PNDMDs showed random amorphous structure. The glass transition temperatures and dielectric constants of solid polymers were found to decrease as the alkyl side-chain length increases for both polymer series. However, PNDMDs showed lower glass transition temperatures and higher dielectric constants, as compared with those of PNDADAs containing the same alkyl substituents. This difference, caused by the higher side-group mobility of PNDMDs, may be closely related to the nano-scale order in amorphous PNDADAs and its absence in PNDMDs.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.225-228
• /
• 2018

Plasticizers added to thermoplastic polymers are known to shorten the life of products due to the elution to outside, and some of them are harmful to our environment and human body. Since the use of phthalate plasticizers suspected of being carcinogens has been gradually prohibited, there is a need for environmentally friendly plasticizers that can replace them. Most of the substances have a low compatibility with resin, high cost and lack of safety verification. Therefore, in this study, four kinds of norbornene dialkyl ester compounds possessing excellent physical properties, which are also reported as safe compounds from the toxicity evaluation, were added to PVC resin to evaluate the possibility of human exposure by leaching, and also the potential usage as plasticizer candidates alternative to commercial ones including DEHP, DINCH and DOTP. The test was carried out according to the American standard test method (ASTM). The results showed that di-2-ethylhexyl-5-norbornene-2,3-dicarboxylate (DEHN) in aqueous solvents and diisopentyl-5-norbornene-2,3-dicarboxylate (DIPN) compounds in oil solvents were superior or equivalent to DEHP. In addition, all four norbornene compounds showed lower values than 100 ppm, which is considered to have an influence on the environment, indicating that the polar norbornene structure affects the elution.