• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.42-43
• /
• 1994

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.2
• /
• pp.9-14
• /
• 1979

As the fabric merchandises become more diversified and the pre-condensates of resin are used in increasing amount to enhance the quality of so-called 'easy care' in such fabric goods, form-aldehyde, which is extricated from nonwoven fabrics, has posed problems. The result of the study conformed, firstly that the fusible bonded webs sold in the current market contained a considerable amount of formaldehyde, i.e. the minimum of 552$\mu$g/g and the maximum of 2,123$\mu$g/g. Secondly, formaldehyde fond in many of such fabric goods was unable to be removed completely even after washed for, three times. Thirdly, the degree of permeation of HCHO into other part of the fabric proved to be high and. when kept in a poly bag over 10days. the amount of formaldehyde tended to increase. Such experiment, therefore, demonstrates that the methods of delivery and storage employed in the current distribution structure must be thoroughly re-examined. The conclusion of this study shows that we should be more concerned with the adverse effects of formaldehyde for the health of consumers. let alone the increase of export of such merchandises.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.128-137
• /
• 2000

A range of suede-like samples were collected including woven fabric type, nonwoven fabric type, and natural suede(sheep). The surface textures of these suede-like fabrics are rather diverse and different from the plain filament type fabrics since there are a lot of fine surface free fiber ends. Physical and mechanical measurements were carried using the KES equipments. Based on the Kawabata-Niwa translational equation, primary hand values and THV were calculated. Uniaxial tensile tests were performed. Using glossmeter, the reflectance pattern was analyzed at different incidence and receiving angles. In order to capture the surface images of the specimens, a CCD camera and frame grabber connected to a PC were employed. The reflectance uniformity of the images was measured with line-profile analysis and standard deviation values of the profile of the images were calculated. After the multiscale wavelet transfermation, correlation among the transformed image was analyzed at each scale. The reflectance uniformity of the natural suede was better than that of nonwoven type suede, while that of woven type suede was the last among the selected three samples(natural suede, nonwoven type, woven type). The correlation analysis among images has shown the possibility of using the wavelet transformation of the images as one of the measures to detect similarities among the textured specimens.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.44-50
• /
• 2020

In this study, pre-treatment was performed on kapok, a hydrophobic fiber, to compare dyeability by hydrophilization. The pretreatment conditions of kapok fiber were used with different amounts of sodium oleate(NaO), a fatty acid-based anionic surfactant, and xanthan gum(XG) as a natural thickener. At this time, NaO and XG were separately or mixed treated with 0.01%, 0.1%, 1% aqueous solution at 80℃ for 30 min. Hydrophilicity through dyeing was confirmed using Sappan wood extract. Therefore, SEM observation was performed to investigate the surface change of kapok fiber according to the conditions. The surface color difference was also analyzed. Pretreated kapok fibers were made from nonwoven fabrics and the contact angles were measured to determine their hydrophilization. The surface of the fiber after pretreatment was found to be cracked when NaO and NaO were mixed with XG. The surface color was the highest in a^⁎ and K/S values after the simultaneous treatment of NaO and XG, followed by NaO pretreatment and XG pretreatment. The contact angle of kapok fiber made of nonwoven fabric was slightly lower at 300g/㎡ than the fabric weight of 150g/㎡. Such hydrophilized nonwoven kapok fiber are expected to be used in various fields.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.50-56
• /
• 1998

Nonwoven fabric was treated with chitosan solution to impart antimicrobial activities by pad-dry method. Antimicrobial activity was measured by Shake Flask Method. Two chitosans of different molecular weight(Mw) with similar degree of deacetylation(DDA) were used : ca. 1,800(chitosan oligomer : DDA 84%) and 180,000(DDA 86%). Chitosan oligomer displayed high antimicrobial activity against P. vulgaris at 0.01%, S. aureus and E. coli at 0.05% treatment concentration, shelving above 90% of reduction rate. Chitosan of Mw 180,000 was effective against S. aureus, E. coil and P. vulgaris at 0.05% treatment concentration, showing almost 100% reduction rate. While chitosan of Mw 180,000 shelved reduction rate above 75% against K. pneumoniae and P. aeruginosa at 0.5% treatment concentration, chitosan oligomer was not effective against them. Fabrics become stiffer and less air permeable as treatment concentration increases. Liquid strike-through time of the sample treated with 0.5% chitosan oligomer solution (3.0 sec) was comparable with a hydrophilic finished sample commercially available(2.6 sec).

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.464-469
• /
• 2005

In the nonwoven fabric filter bioreactor (NFBR), both the construction and the operation costs could be saved because a high concentration of microorganism can be maintained in the reactor as in the membrane bioreactor. However, the NFBR process has been investigated only under aerobic and/or anoxic conditions, In this research, a basic anaerobic treatment experiment was performed at $35^{\circ}C$ by feeding an airtight NFBR with a concentrated synthetic organic wastewater. The organic loading rate (OLR) of the NFBR was increased stepwise from $0.25kg\;COD/m^3-day$ to $0.77kg\;COD/m^3-day$ by gradually decreasing the hydraulic retention time from 20 days to 13 days. The results of the research showed that the best COD removal efficiency achieved at the OLR of $0.67kg\;COD/m^3-day$ with a value of 99.3%. The methane content of the produced gas was highest with a value of 61.2% at the OLR of $0.33g\;COD/m^3-day$. The highest methane production rate was $0.89g\;COD/m^3-day$ at the same OLR. The operation was terminated at the OLR of $0.77kg\;COD/m^3-day$ because of the deterioration in COD removal efficiency, gas production rate, and the methane content of the gas. Further researches are recommended for the NFBR to be employed for anaerobic treatment of organic wastewaters.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.156-160
• /
• 1997

The combination of biological wastewater treatment process and membrane separation has many advantages such as better effluent quality and system stability over the conventional biological wastewater treatment process. In this study, direct membrane separation using nonwoven fabric was applied to biological wastewater treatment. A nonwoven fabric module was submerged in the aerated bioreactor. And accumulated biomass in the bioreactor was separated by suction. The system was operated with various condition to investigate pollutant removal efficiencies and flux. After formation of biomass layer on nonwoven fabric surface, a day, the stable effluent water quality was obtained. The flux decreased at a high suction pressure faster than a low pressure. The stable flux was obtained at the pressure of $21{\sim}25cmHg$. In spite of variation of hydraulic retention time, organic loading rate, the removal efficiencies of BOD, $COD_{Cr}$. $COD_{Mn}$ were very high as follows : $95.2%(0.14{\sim}0.97\;BODKg/m^3/day)$, $86.0%(0.17{\sim}1.39\;COD_{Cr}Kg/m^3/day)$, $90.0%(0.097{\sim}0.61\;COD_{Mn}Kg/m^3/day)$.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.783-792
• /
• 2007

To investigate the effects of alkalinity on the nitrification capability of the nonwoven fabric filter bioreactor(NFBR), an experiment was performed for 641 days at a hydraulic retention time of approximately 11 hours by changing the influent concentration of $NH_3-N$ from 54 mg/L to 1,400 mg/L and alkalinity from 43 mg/L to 10,480 mg/L. The MLSS concentration reduced from an initial value of 2,650 mg/L down to 830 mg/L, then increased up to 8,340 mg/L. Though the volumetric loading rate varied in a range of $0.120\sim3.130$ kg $NH_3-N/m^3-day$, the F/M ratio showed a narrow range of $0.067\sim0.414$ kg $NH_3-N/kg$ MLSS-day. The average nitrification efficiency at each experimental stage resulted in the range of $35.2\sim100%$, and the maximum nitrification rate was 2.970 kg $N/m^3-day$ or 0.489 g N/g MLVSS-day. The nitrifiers' fraction of the MLVSS increased up to 100% from an initial value of 7.1% and the biofilm formed on the nonwoven fabric filter showed a very low nitrifiers' fraction of mere 2.2%. The growth yield of the MLSS and the alkalinity consumption rate were computed to be 0.117 g VSS/g N removed and 7.08 g alkalinity/g $NO_x^--N$ produced, respectively. Results of the research suggest that NFBR could be an adequate process for nitrification of wastewaters with high ammonia concentrations.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.88-96
• /
• 2006

Among the various methods for minimization of waste activated sludge, maintaining a low F/M ratio in the bioreactor is known to be the most effective reliable one. In this research, various experiments were performed to check the capability of the nonwoven fabric filter bioreactor, which has been proved able to maintain a low F/M ratio by maintaining a high MLSS concentration, for excess sludge minimization. The reactor was intermittently fed with a synthetic wastewater having a COD concentration of approximately 300 mg/L and no SS. Results of the experiments showed that the F/M ratio in the reactor decreased to a minimum value of 0.02 g COD/g MLSS-day as the MLSS concentration increased to a maximum value of 31,010 mg/L. However, the measured endogenous decay coefficients and oxygen uptake rates of the MLSS confirmed that the activity of the MLSS decreased as the MLSS concentration increased. Based on the increase of MLSS in the reactor and the mass balance during the whole experimental period, the average microorganism yield coefficients were computed to be low values of 0.148 and 0.139 g MLSS/g COD, respectively. These results indicate that the nonwoven fabric filter bioreactor employed in this research is effective for minimization of excess sludge production.

• Horticultural Science & Technology
• /
• v.16 no.4
• /
• pp.517-519
• /
• 1998

This experiment was carried out to find out the effects of heat conservation materials (burying in soil, lagging, lagging +straw, nonwoven fabric, nonwoven fabric+straw) on freezing damage, labor saving, and crown gall occurrence of 'Kyoho' grapes. Temperature differences in burying in soil and lagging with $2.8^{\circ}C$ and $6.4^{\circ}C$, respectively and were considered favorable for over-wintering of grapevines. Heat conservation index in lagging +straw and burying in soil calculated from degree-hours below $-10^{\circ}C$ was 5 to 7 times higher than that of open field. Budbreak started earlier in lagging with+straw and nonwoven fabric+straw covering, and percent budbreak was increased by 22% and 7%, respectively, as well as higher than burying in soil. Diameter of bearing mother branch and length of internode and daughter branch were gross or long with soil and lagging straw and nonwoven fabric+straw. Cane growth was enhanced by burying in soil and lagging with+straw treatment. Crown gall occured higher in soil covered grape vines Labor saving was obtained in lagging with as much as 44% compared to burying in soil.