• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.89-102
• /
• 2001

Using a multiproduct translog cost function model, this paper examines the existence or absence of scale and scope economies in Seoul's urban bus industry. The Paper then conceptualizes that the bus firm produces three outputs (city, seat and local bus-kilometers) using low input factors(labor, capital, fuel and maintenance). Using 1996 annual observations for 81 Seoul's bus firms, the equation system consisting of a cost function and three input share equations is estimated with the nonlinear iterative Zellner method. The findings show that the cost function corresponding to a non-homothetic production technology with separability between local bus outputs and inputs adequately represents the structure of cost for Seoul's bus firms, and that the demand lot all input factors is quite inelastic with respect to their own price. On the other hand, nearly all firms experience mild overall economies or scale, but rather marked product-specific economies of scale with respect to all the three outputs. In addition, there appear to be substantial economies or scope associated with the joint production of city and seat bus services, while considerable diseconomies of scope associated with that of city and local bus services. These results indicate that the merger of smaller firms into larger firms with a fleet of approximately 200 buses would result in more cost-efficient bus services.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.375-381
• /
• 2018

The monitoring of phytoplankton biomass and community structure is essential as a first step to control the harmful cyanobacterial blooms in freshwater systems, such as seen in rivers and lakes, due to the process of eutrophication and climate change. In order to quantify the biomass of phytoplankton with a wide range in size and shape, the measurement of cell biovolume along with cell density is required for a comprehensive review on this issue. However, most routine monitoring programs preserve the gathered phytoplankton samples before analysis using chemical additives, because of the constraint of time and the number of samples. The purpose of this study was to investigate the cell biovolume change characteristics of six cyanobacterial species, which are common bloom-causing cyanobacteria in the Nakdong River, after the preservation with Lugol's iodine solution. All species showed a statistically significant difference after the addition of Lugol's iodine solution compared to the live cell biovolume, and the cell biovolume decreased to the level of 34.0 ~ 56.3 % at maximum in each species after the preservation. The nonlinear regression models for determining the shrinkage ratio by a preservation period were derived by using the cell biovolume measured until 180 days preservation of each target species, and the equation to convert the cell biovolume measured after preservation for a certain period to the cell biovolume of viable cell was derived using that formula. The conversion equation derived from this study can be used to estimate the actual cell biovolume in the natural environment at the time of sampling, by using the measured biovolume after the preservation in the phytoplankton monitoring. Moreover this is expected to contribute to the final interpretation of the water quality and aquatic ecosystem impacts due to the cyanobacterial blooms.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1003-1009
• /
• 2021

A study on the associative properties of sodium hyaluronate (NaHA) and Alkane-bis (dimethylalkylammonium bromide) surfactants in aqueous solution was investigated in relation to the chemical structure of surfactants. As a result of measuring the interfacial tension, a parabolic graph showing the minimum value (c_min) at a specific concentration was shown. Above this minimum concentration the increase in interfacial tension is thought to be related to the formation of aggregates of NaHA chains and dimeric surfactants. The plot of viscosity vs surfactant concentration shows a slight maxium at c_min and a viscosity decrease at high surfactant concentrations. Viscosity nonlinear behavior is related to the size increase due to the complex growth and to the size shrinkage following from the interaction with electrolyte ions and free micelles. The results of surface tension measurements show a broad region of surface tension decrease, indicating the NaHA-surfactant interaction. The increase in surface tension above c_min may be related to the adsorption of clusters, consisting of free NaHA chains and dimeric surfactant. The strong adsorption of surfactant is observed at high concentrations.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.7
• /
• pp.13-23
• /
• 2021

If roads, bridges, buildings, etc. are built on the ground with soft clay or organic soil, there may be a lot of problems in geotechnical engineering such as settlement and stability due to the large settlement and lack of bearing capacity. In extreme cases, it may appear due to shear failure or collapse of the constructed structure, so a ground improvement method is indispensable to increase the strength of the ground and to suppress settlement. In this study, the settlement according to each groundwater level condition was analyzed using the measurement results for the groundwater level conditions, one of the important factors in predicting the settlement in dredged and reclaimed ground, and the groundwater level conditions applied to the settlement analysis were proposed by comparing it with settlement generated 5 years after construction. As a result of the analysis, it is judged that it is reasonable to apply the measured groundwater level during construction and the low water ordinary neap tide (L.W.O.N.T) during load application for the groundwater level in the settlement analysis. In addition, in the case of the dredged and reclaimed ground, it is estimated that the water pressure acting on the clay layer is nonlinear, as the result of the observations of the head of water at the observation points above and below the in-situ clay layer were different.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.419-426
• /
• 2020

The structural design of the steel eccentrically braced frame (EBF) was developed and analyzed in this study through multiobjective optimization (MOO). For the optimal design, NSGA-II which is one of the genetic algorithms was utilized. The amount of structure and interfloor displacement were selected as the objective functions of the MOO. The constraints include strength ratio and rotation angle of the link, which are required by structural standards and have forms of the penalty function such that the values of the objective functions increase drastically when a condition is violated. The regulations in the code provision for the EBF system are based on the concept of capacity design, that is, only the link members are allowed to yield, whereas the remaining members are intended to withstand the member forces within their elastic ranges. However, although the pareto front obtained from MOO satisfies the regulations in the code provision, the actual nonlinear behavior shows that the plastic deformation is concentrated in the link member of a certain story, resulting in the formation of a soft story, which violates the capacity design concept in the design code. To address this problem, another constraint based on the Eurocode was added to ensure that the maximum values of the shear overstrength factors of all links did not exceed 1.25 times the minimum values. When this constraint was added, it was observed that the resulting pareto front complied with both the design regulations and capacity design concept. Ratios of the link length to beam span ranged from 10% to 14%, which was within the category of shear links. The overall design is dominated by the constraint on the link's overstrength factor ratio. Design characteristics required by the design code, such as interstory drift and member strength ratios, were conservatively compared to the allowable values.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2020

A CFRP sheet has been applied as a structural reinforcement in the field, and various studies are conducted to evaluate the effect of CFRP sheets on reinforced concrete. Although many experiments were performed from previous studies, there are still limitations to analyze structural behaviors with various parameters in experiments directly. This study shows the FEA on structural behaviors of RC beams reinforced with CFRP sheets using ABAQUS software. To simulate debonding failure of CFRP sheets which is a major failure mode of RC beam with CFRP sheets, a cohesive element was applied between the bottom surface of RC beam and CFRP sheets. Both quasi-static method and 2-D symmetric FE model technique were performed to solve nonlinear problems. Results obtained from the FE models show good agreements with experimental results. It was found that reinforcement level of CFRP sheets is closely related to structural behavior of reinforced concrete including maximum strength, initial stiffness and deflection at failure. Also, as over-reinforcement of CFRP sheets could give rise to the brittle failure of RCstructure using CFRP sheets, an appropriate measure should be required when installing CFRP sheets in the structure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.45-55
• /
• 2022

Because boundary confinement details proposed in the current design standards are significantly inferior in workability and production quality, it is necessary to develop boundary confinement details of RC structural walls that are capable of ensuring seismic performance and workability. With the recent development of the wire rod manufacturing technology, various pre-fabricated continuous hoop details can be manufactured. In this study, an analysis was conducted on the moment-curvature relationship of RC structural walls to which the pre-fabricated continuous hoop details were applied. According to the nonlinear cross-section analysis, the RC structure wall to which the details of the pre-fabricated continuous hoop details are applied can ensure seismic performance as the area of the pre-fabricated continuous hoop increases. Based on these research results, when applying the pre-fabricated continuous hoop in detail, it is necessary to secure the area of the pre-fabricated continuous hoop as much as the area of the existing boundary confinement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.473-482
• /
• 2009

This study numerically discusses wave forces acting on a vertical wall such as breakwaters or revetments, subjected to incident undular or turbulent bores. Due to the complex hydrodynamics of bore, its wave forces have been predicted, mainly through laboratory experiments. Numerical simulations in this paper were carried out by CADMAS-SURF(CDIT, 2001), which is based on Navier-Stokes momentum equations and VOF method (Hirt and Nichols, 1981) for tracking free water surface. Its original source code was also partly revised to generate bore in the numerical water channel. Numerical raw data computed by CADMAS-SURF included great strong spike phenomena that show the abrupt jumps of wave loads. To resolve this undesired noise of raw data, the band-pass filter with the frequency of 5Hz was utilized. The filtered results showed reasonable agreements with the experimental results performed by Matsutomi (1991) and Ramsden (1996). It was confirmed that CADMASSURF can be applied to the design of coastal structures against tsunami bores. In addition, the transformation process and propagation speed of bores in the same 2-d water channel were discussed by the variations of water level for time and space. The numerical results indicated that the propagation speed of bore was changed due to the nonlinear interactions between negative and reflected waves.

• Asia Marketing Journal
• /
• v.14 no.4
• /
• pp.143-165
• /
• 2013

Sales force automation (SFA) technologies are increasingly used to support customer relationship management (CRM) strategies. However, the popular press reports mixed results among companies incorporating SFA technologies and the previous studies have less interested in relationship quality between sales person and customer as an outcome of SFA. Actually the improved quality of the salesperson-customer relationship may be the most important outcome of SFA usage. This outcome is especially meaningful in today's marketplace given the increasing focus placed on customer retention and other customer related performance such as customer lifetime value. Therefore, this study seeks to further examine the impact of SFA usage within two different firms using SFA technologies to examine the impact of SFA usage on both customer relationship quality and sales performance. Additionally, the moderating roles of perceived managerial support and salesperson experience on the outcomes of SFA usage are examined. The results shows that direct effect of SFA usage on performance was not significant but highlight the mediating role of customer relationship quality in the SFA usage - sales performance relationship. Also, this research examines a number of moderating effects of both management supports for SFA and salesperson's sales work experience. The results indicate that management support has a significant direct influence on relationship quality and salesperson performance, but not a significant moderating effect on the relationship between SFA usage and the outcomes (relationship quality and performance). Thus moderating effects were not supported but find significant main effects. First of all, finding of this study suggest that a formula for successful SFA implementation must be one that highlights a SFA usage → relationship quality → sales performance sequence. This means when sales person use SFA they must build relationship with customer first then will return some long term performance. Second, the implications of not considering the introduction of big technology initiatives in terms of fit within the company's culture, strategy, structure, and environment may in many cases be quite noteworthy. Therefore, the launching of a new technology in the firm, such as SFA, may have a nonlinear impact upon overall firm performance, depending on the presence of other complimentary resources and capabilities. Finally the authors offer a number of implications for research and practice, and suggest directions for future SFA research that may further improve our understanding of this increasingly relevant topic.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.1-22
• /
• 2023

Purpose - Southeast Asia has been the focus of Korea's foreign investment. Korea has been helping developing countries in Southeast Asia achieve economic growth and win-win cooperation through capital exports. FDI is an important channel for technology diffusion. However, the impact of FDI on the bias of technological progress in the host country is dependent on the host country's own endowment structure and capital-labor factor substitution elasticity. Therefore, the central issue of this paper is to accurately evaluate the impact of Korea's FDI to the four Southeast Asian countries in various industries on their bias of technological progress. Design/methodology - The paper uses macroeconomic data for Korea and four East Asian countries to estimate capital-labor factor elasticities of substitution using nonlinear, seemingly uncorrelated regressions (NLSUR). Then, the biased technological change index (BTCI) is calculated for each country. Finally, panel data analysis is used to explore the impact of Korean FDI in various industries in the four Southeast Asian countries on their own directed technological progress, and a robustness test is conducted. Findings - There is a substitution relationship between capital and labor factors based on their elasticity in Korea, Singapore and the Philippines. There is a complementary relationship between capital and labor factors in Indonesia and Malaysia. According to the BTCI, there is a trend toward labor-biased technological progress in all countries. Korean investments in manufacturing, wholesale and retail trade in the host country trigger capital-biased technological change in the host country; investments in the finance, insurance and information and communication sectors trigger labor-biased technological change. In addition, this paper also confirms that directed technological progress can enable cross-country transmission. Originality/value - The innovation of this paper lies in three aspects. First, we estimate the BTCI for five countries and explore the trend and situation of directed technological progress in each country from each country's own perspective. Second, we explore the impact of Korean FDI in the host country on the bias to its technological progress at the industry level. Second, we explore the impact of Korean FDI in various industries in the four Southeast Asian countries on the four countries' own directed technological progress from a national perspective. Finally, we propose corresponding countermeasures for technological progress from the perspective of inverse factor endowment. These innovative points not only expand the understanding of technological progress and cross-country technology transfer in East Asia but also provide practical references for policy-makers and business operators.