• Steel and Composite Structures
• /
• 제1권4호
• /
• pp.393-410
• /
• 2001

In an experimental and analytical study on the structural behavior of slender circular steel-concrete composite columns, eleven specimens were tested to investigate the effects of three ways to apply a load to a column. The load was applied eccentrically to the concrete section, to the steel section or to the entire section. Three-dimensional nonlinear finite element models were established and verified with the experimental results. The analytical models were also used to study how the behavior of the column was influenced by the bond strength between the steel tube and the concrete core and the by confinement of the concrete core offered by the steel tube. The results obtained from the tests and the finite element analyses showed that the behavior of the column was greatly influenced by the method used to apply a load to the column section. When relying on just the natural bond, full composite action was achieved only when the load was applied to the entire section of the column. Furthermore, because of the slenderness effects the columns did not exhibit the beneficial effects of composite behavior in terms of increased concrete strength due to the confinement.

• Advances in concrete construction
• /
• 제11권2호
• /
• pp.89-98
• /
• 2021

Investigations on the dynamic behavior of concrete members, incorporating steel fibers with different aspect ratios, are limited so far and do not covered comprehensively in prior studies. Present endeavor is devoted to examine the dynamic response of the steel fibrous concrete beams and slabs under the influence of impact loading. These members were reinforced with steel fibers in different length of 25 mm and 50 mm. Four concrete mixes were designed and used based on the proportion of long and short fibers. Twenty-four slabs and beams were fabricated with respect to the concrete mix and these specimens were tested in impact load experiment. Testing observations revealed that the maximum dynamic deflection or ductility of the member can be achieved with increasing the fiber length. Structural behavior of the tested structures was predicted using nonlinear finite element analysis with specific material constitutive relationships. Eight nodes plate elements have been considered in the present dynamic analysis. Dynamic fracture energy of the members was calculated and agreement ratio, of more than 70%, was noticed between the experimental and analysis outcomes.

• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.695-711
• /
• 2013

It is reasonable to assume that reinforced concrete (RC) structures enter the nonlinear range of response during a severe ground motion. Numerical analysis to predict the behaviour therefore must allow for the presence of nonlinear deformations if an accurate estimate of seismic response is aimed. Among the factors contributing to inelastic deformations, the influence of the degradation of the bond slip phenomenon is important. Any rebar slip generates an additional rotation at the end regions of structural members which are not accounted for in a conventional analysis. Although these deformations could affect the seismic response of RC structures considerably, they are often neglected due to the unavailability of suitable models. In this paper, the seismic response of two types of RC structures, designed according to the Iranian concrete code (ABA) and the Iranian seismic code (2800), are evaluated using nonlinear dynamic and static analyses. The investigation is performed using nonlinear dynamic and static pushover analysis considering the deformations due to anchorage slip. The nonlinear analysis results confirm that bond slip significantly influences the seismic behavior of RC structure leading to an increase of lateral deformations by up to 30% depending on the height of building. The outcomes also identify important parameters affecting the extent of this influence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.213-218
• /
• 1993

F.E.M formulation is carried out in order to determine temperature distribution in the concrete structure. According to this formulation an F.E.M. code is developed, which is capable of silmulating time varying boundary conditions and nonlinear thermal properties.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.567-568
• /
• 2009

The CAMUS 2000-1 experimental program were performed in France to investigate of the 1/3-scaled reinforced concrete bearing walls behavior on the shaking table under biaxial earthquake loading. The nonlinear 3D finite element analysis of push over test and linear dynamic analysis under biaxial earthquake loading are investigated with the concrete damaged plasticity model using ABAQUS.

• 한국강구조학회 논문집
• /
• 제22권5호
• /
• pp.497-509
• /
• 2010

고강도강재 및 고강도콘크리트를 적용한 매입형 합성기둥의 편심압축시 거동특성을 연구하기 위하여, 항복강도 $f_{ys}$=913MPa 강재와 압축강도 $f_{ck}$97.7MPa 콘크리트를 사용하여 실험연구를 실시하였다. 주요변수는 횡철근의 종류, 항복강도, 배근간격, 그리고 편심하중거리이다. 거동특성을 분석하기 위하여 구속효과와 변형률적합조건을 적용한 비선형 단면해석을 실시하였으며, 현행 설계기준들의 적용성을 판단하기 위해 실험결과와 비교하였다. 횡구속효과에 의하여 콘크리트의 연성능력은 증가하였으며, 이에 따라 단면의 휨모멘트강도가 증가하였다. 비선형해석을 통해 합성단면의 축력-모멘트 상관관계를 예측한 결과는 실험결과와 잘 일치한 반면, 강재의 완전소성강도를 사용하는 Eurocode 4는 실험체의 성능을 과대평가하였으며, 콘크리트의 횡구속효과를 고려하지 않은 ACI 318은 과소평가하였다.

• 콘크리트학회지
• /
• 제8권3호
• /
• pp.187-195
• /
• 1996

콘크리트 구조요소의 비선형거동을 예측하기 위하여 압축응력장 이론의 기본개념인 압축강도 연화 현상, 거시적 및 회전균열 모델을 고려한 유한요소해석이 제시되었다. 수치해석상의 효율성 및 최대하중 이후의 거동에 주안점을 두어 초기재료 강성을 채택한 변위증분법 논리 및 빠른 수렴을 위한 Over-Relaxation 방법이 Isoparametric계의 8-Node 요소에 포함.유도되었다. 상기에 근거하여 제작된 비선형 프로그램, NASCOM은 다조하중을 지지하는콘크리트 구조요소의 내력, 변형특성, 균열 분포 상황 및 보강근의 항복 분포를 예측하는데 사용할 수 있다. NASCOM의 성능을 검토하기 위하여 이러한 목적에 빈번히 사용되는 Bhide의 패널(PB21) 및 Leonhardt의 춤이 큰보에 대한 해석이 실시되었다. 패널에 대한 해석결과는 대체로 변형이력 및 강도가 강한 거동을 나타내는 반면에, 춤이 큰보에 대해서는 변형이력이 유연한 거동을 나타내고있어, 향후 보다 정확한 결과를 예측하기 위해서는 콘크리트의 인강강화 및 압축강도 연화현상에 대하여 좀더 향상된 재료모델의 고려가 필요한 것으로 판단되었다.

• 한국전산구조공학회논문집
• /
• 제34권6호
• /
• pp.385-392
• /
• 2021

강진 시 원자력발전시설의 비선형 응답이 중요하기 때문에 이 시설의 내진성능에 대한 관심이 증가하였다. 이 연구에서는 원자력 발전소 철근콘크리트 전단벽의 유한요소해석을 위한 재료모델의 적절한 변수를 제시하였다: 최대인장강도, 팽창각, 손상계수. 이를 위해 상용 유한요소 해석프로그램인 ABAQUS를 사용하여 낮은 형상비를 가진 철근콘크리트 전단벽의 비선형 거동과 전단 파괴모드에 대한 이 주요 변수의 효과에 대한 연구를 수행하였다. 연구결과에 기반하여 비선형 시간이력해석을 통해 강진 하의 원자로건물의 비선형 응답을 평가하였다.

• Advances in nano research
• /
• 제16권3호
• /
• pp.231-249
• /
• 2024

When the amplitude of the vibrations is equivalent to that clearance, the vibrations for small amplitudes will really be significantly nonlinear. Nonlinearities will not be significant for amplitudes that are rather modest. Finally, nonlinearities will become crucial once again for big amplitudes. Therefore, the concrete panel system may experience a big amplitude in this work as a result of the high temperature. Based on the 3D modeling of the shell theory, the current work shows the influences of the von Kármán strain-displacement kinematic nonlinearity on the constitutive laws of the structure. The system's governing Equations in the nonlinear form are solved using Kronecker and Hadamard products, the discretization of Equations on the space domain, and Duffing-type Equations. Thermo-elasticity Equations. are used to represent the system's temperature. The harmonic solution technique for the displacement domain and the multiple-scale approach for the time domain are both covered in the section on solution procedures for solving nonlinear Equations. An effective data-driven solution is often utilized to predict how different systems would behave. The number of hidden layers and the learning rate are two hyperparameters for the network that are often chosen manually when required. Additionally, the data-driven method is offered for addressing the nonlinear vibration issue in order to reduce the computing cost of the current study. The conclusions of the present study may be validated by contrasting them with those of data-driven solutions and other published articles. The findings show that certain physical and geometrical characteristics have a significant effect on the existing concrete panel structure's susceptibility to temperature change and GPL weight fraction. For building construction industries, several useful recommendations for improving the thermo-mechanics' behavior of structural concrete panels are presented.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1045-1067
• /
• 2016

Concrete bridges with corrugated steel webs and prestressed by both internal and external tendons have emerged as one of the promising bridge forms. In view of the different behaviour of components and the large shear deformation of webs with negligible flexural stiffness, the assumption that plane sections remain plane may no longer be valid, and therefore the classical Euler-Bernoulli and Timoshenko beam models may not be applicable. In the design of this type of bridges, both the ultimate load and ductility should be examined, which requires the estimation of full-range behaviour. An analytical sandwich beam model and its corresponding beam finite element model for geometric and material nonlinear analysis are developed for this type of bridges considering the diaphragm effects. Different rotations are assigned to the flanges and corrugated steel webs to describe the displacements. The model accounts for the interaction between the axial and flexural deformations of the beam, and uses the actual stress-strain curves of materials considering their stress path-dependence. With a nonlinear kinematical theory, complete description of the nonlinear interaction between the external tendons and the beam is obtained. The numerical model proposed is verified by experiments.