• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2012

This study surveyed the preparation of 8oz coated fabric and the physical property of the coated fabric according to the treated condition for the sail yacht. And the coated fabrics were compared with the performance of overseas products for verification. Physical properties of the coated fabric treated with non-yellowing functional polyurethane resin were examined according to the treatment condition such as compression and ageing treatments. Finally, yellowing fastness to light for 60 hours was assessed. Considering the compression condition after coating, good physical property was obtained at $6kgf/cm^2$. Also, the performance of yellowing fastness was similar to performance of overseas goods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.409-414
• /
• 2009

In 1970's Black locust(Robinia pseudoacacia) had been widely planted Korea as an important forest greening species for erosion control afforestation. Since 2000, however, the tree's leaf-yellowing symptom has often been observed at a limited region and then spreaded out over the country in 2006. This study was conducted to study soil physiochemical properties of black locust stands with and without the leaf-yellowing symptom in Osan, Gyeonggi province. Most of soils in sampling sites were mostly slightly eroded, dry, and moderately dry. Available soil depth(16cm) and total soil depth(26cm) in leaf-yellowing (LY) site were significantly lower than in non leaf-yellowing (Non-LY) site's soil depths which were 30cm and 56cm, respectively. And solid phase proportion and bulk density in soils were lower in LY site than in non-LY site soils, while soil liquid phase proportion was also low. It could reflect that LY site soils might have a lower air and moisture movement in the rhizosphere of black locust stand compared with non-LY site soils. Soil acidity in both sites was very strong acid, soil pH (4.42) of LY site was slightly lower than non-LY site's (pH 4.54). Content of available phosphorous, exchangeable $Ca^{2+}$ and $Mg^{2+}$ and percent base saturation were less than LY site. These results indicated that soil physiochemical condition in LY site, more deteriorated than non-LY site, should adversely affect the retention and supply capacity of soil nutrients and moisture. Therefore the black locust may be more sensitive to other environmental stresses.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.49-54
• /
• 2023

For unknown reasons, a few trees in a private chestnut orchard in Icheon si, Gyunggi-do suffered leaf chlorosis and growth decline. Based on symptoms, phytoplasma was a probable cause. Leaf samples were collected from two symptomatic and non-symptomatic trees in the orchard for phytoplasma detection. An amplicon of about 1.2 bp size was obtained from both symptomatic trees by PCR with the universal 16S rDNA primers. Sequences of these amplicons were found to have 99% nucleotide sequence identity to the corresponding genomic region of 16SrIII (X-disease group). More than 100 phytoplasma isolates, such as Candidatus phytoplasma pruni, Milkweed yellows phytoplasma, Goldenrod yellows phytoplasma, Tsuwabuki witches'-broom phytoplasma, Candidatus Phytoplasma trifolii, etc. were involved in the list. Phylogenetic analysis revealed that the sequence obtained in this study closely clustered with Candidatus phytoplasma groups. While one of the amplicons shared 91% identity with the Candidatus phytoplasma castaneae, the other shared only 47%. It needs further analysis and investigation to determine the exact taxonomy. Meanwhile, based on the analysis of the sequences, chlorosis, and small leaves were associated with phytoplasma.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.44 no.1
• /
• pp.12-20
• /
• 2022

In this research, the silk web was hot-pressed for various times, the effect of press time on the structure and mechanical properties of silk non-woven fabric was also investigated. The yellowing appeared in the silk non-woven fabric and became more apparent as press time was increased. The crystallinity of silk was decreased by the hot press treatment and it did not change significantly with an increase of hot press time. The porosity of silk non-woven fabric was constantly decreased until 120 s and it did not change much after that. The thickness of silk non-woven fabric was significantly decreased by a press time of 10 s and slightly decreased with a further increase of hot press time. The hot press treatment increased the maximum stress and elongation of silk non-woven fabrics. The press time had a significant impact on the mechanical properties of silk non-woven fabric, with 90 s being the optimum condition for the best work of rupture of silk non-woven fabric.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.669-675
• /
• 2009

A study has been made on the preparation of liquid resin of non-solvent and non-discoloration type for replacement of the soft PVC at room temperature. A new synthetic process was developed by structure-control design of polyurethane synthesis using pre-polymer and polyols as curing agent. The optimum recipe was made according to macro-glycols, molecular weight and reaction conditions, and the final products indicated that the mechanical properties such as tensile strength, tear strength and flexibility was very excellent than PVC products. Also, viscosity, hardness and color operations of the final products can be controlled by this system. And yellowing property by UV and NOx gas was improved from the various additive experiment.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.2
• /
• pp.147-153
• /
• 1984

During curing of aromatic tobacco leaves, coloring temperatures were set at 26, 30, 34, 38 and $42^{\circ}C$, and also leaf drying temperatures were established at 35, 40, 45, 50, 55 and $60^{\circ}C$, respectively, to investigate the thermal effect on characteristics of cured leaves. Appearance of yellow color from green was accelerated, the contents of non-volatile organic and higher fatty acids in leaves tended to increase with the higher yellowing temperature. Quality by price per kg was best at 45-$50^{\circ}C$ and score of smoking test was highest at 40-$50^{\circ}C$ during leaf drying stage. The concentrations of non-volatile organic acids and volatile essential oil inclined to decrease, but a reverse in this trend with higher fatty acids as temperature increased during leaf drying stage. The difference of other components was discussed.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.743-747
• /
• 1994

The catalytic effects of carboxylic acid and dibutyltin dilaurate(DBTL) on the curing rate of acrylic polyol with isocyanate prepolymer were investigated. In this work reaction of a biuret type aliphatic isocyanate with acrylic polyol follows the second order reaction in the thin film state. Carboxylic acid of acrylic polyol has a strong catalytic effect on the isocyanate groups and influences greatly on curing rate, also DBTL is more effective catalysis on acrylic polyol without carboxylic acid than with carboxylic acid.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.118-118
• /
• 2003

The occurrence of Fusarium wilt in strawberry fields in Korea was assessed from 2001 to 2003. Fusarium wilt was found from June to August in nursery beds, from September to October after planting in production beds, and from January to March during harvest. The symptoms seen were root rots, discolored vascular tissue in the crown and deformation and yellowing of central leaflets. The disease occurred in up to 30％ of plants in 37 of 214 fields surveyed. Fusarium of sporum Schlecht. ex Fr. f. sp. fragariae was frequently isolated from cvs. Dochiodome, Maehyang, Redpearl, Samaberry and Akihime. Factors affecting the occurrence of Fusarium wilt were investigated; infested soils had high salt concentrations, low pH, OM, average P2O5 and exchangeable. Fusarium wilt was more frequent following conventional basal fertilization than after non-nitrogen basal fertilization and more frequent following the use of NH4-N than after NO3-N.

• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.93-97
• /
• 2011

For quarantine purpose, we selected five plant RNA viruses including Cucumber vein yellowing virus (CVYV), Cucurbit yellow stunting disorder virus (CYSDV), Potato aucuba mosaic virus (PAMV), Potato yellow dwarf virus (PYDV), and Tomato chlorosis virus (ToCV), which are not reported in Korea and cause serious economic losses to the family Cucurbitaceae or Solanaceae. To detect those viruses, we employed RT-PCR technique with specific oligonucleotide primer pairs and tested their detection efficiency for each virus. To design RT-PCR primers, coat protein was used for CVYV, CYSDV, and ToCV whereas RNA polymerase and nucleocapsid regions were used for PAMV and PYDV, respectively. The development of an RT-PCR based method proved a useful tool for rapid detection and identification of quarantine virus infections.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.