• 한국화재소방학회논문지
• /
• 제17권4호
• /
• pp.111-116
• /
• 2003

가로, 세로, 높이가 각각 100cm, 60cm, 45cm로 내용적이 $270\ell$인 폭발 용기를 이용하여 불균일 농도 상태의 LPG-공기 혼합가스의 폭발특성을 측정하였다. 폭발은 vented-explosion과 closed explosion의 조건에서 실시하였다. 실험의 변수로는 점화원의 위치, 노즐직경 및 유속으로, 시료가스를 주입하는 노즐의 직경과 유속을 변화시키면서 용기 내에서의 불균일 혼합정도를 조절하였다. 폭발압력은 strain형 압력센사를 사용하여 측정하였고 폭발화염의 거동은 비디오카메라로 측정하여 분석하였다. 실험결과 유속과 가스 주입 시간이 용기 내 가스 혼합에 중요한 요소임을 알 수 있었으며, 불균일 정도가 심화될 수록 폭발압력과 압력상승속도가 감소하였으나 용기 내 폭발화염의 체류시간은 크게 증가하였으며 이로 인하여 가스 폭발 후 화재로의 전이 위험성이 증가함을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.27-35
• /
• 2024

메탄, 프로판 등을 주성분으로 하는 연료가스는 폭발위험장소에서 사용될 수 있으며, 누출로 인한 공정조건의 영향으로 불균일한 혼합기를 형성할 수 있다. 균일한 혼합기를 대상으로 측정된 문헌 데이터를 이용한 화재 폭발 위험성 평가, 손상 예측은 가스 누출에 의한 실제 폭발 사고와 다른 결과를 얻을 수 있다. 본 연구에서는 가스 누출시 나타날 수 있는 농도 변화에 있어서 불균일성 혼합기의 폭발압력, 화염속도 등의 폭발특성을 조사하였다. 길이 0.82 m의 스테인리스 재질의 밀폐 배관에서 수행하였으며 컬러 초고속 카메라 및 압력 센서를 사용하여 관찰하였다. 또한 배관 내의 시간에 따른 농도차이 변화에 대해 회귀분석 모델을 사용하여 불균일 혼합물의 정량화 방법을 제안하였다. 본 연구의 농도 불균일성 조건에 있어서 메탄 폭발 시 전파화염은 불균일성 농도가 높아짐에 따라 화염 면적의 증가가 관찰되었고 이는 난류 화염의 주름진 화염 구조와 유사하였다. 메탄의 최대압력까지 걸리는 소요시간은 불균일성이 클수록 감소하였고, 폭발압력은 불균일성이 클수록 증가하였다. 농도가 불균일한 메탄의 K_G(폭연지수)의 범위는 1.30~1.58 [MPa·m/s]으로서 메탄의 농도가 균일성에서 불균일성로 변화하면서 17.7% 증가하였다.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.127-145
• /
• 1999

This paper deals with the development of an approach for evaluating the squash load and rigidity of unprotected concrete filled steel columns at elevated temperatures. The current approach of evaluating these properties is reviewed. It is shown that with a non-uniform temperature distribution, over the composite cross-section, the calculations for the squash load and rigidity are tedious in the current method. A simplified approach is proposed to evaluate the temperature distribution, squash load, and rigidity of composite columns. This approach is based on the model in Eurocode 4 and can conveniently be used to calculate the resistance to axial compression of a concrete filled steel column for any fire resistance time. The accuracy of the proposed approach is assessed by comparing the predicted strengths against the results of fire tests on concrete filled circular and square steel columns. The applicability of the proposed approach to a design situation is illustrated through a numerical example.

• 한국안전학회지
• /
• 제37권1호
• /
• pp.1-11
• /
• 2022

This numerical study investigates the effects of the size of the natural smoke vent area (10% and 1% of the floor area) and the location of the fire source (i.e., at the side and center of the stage) on the temperature distribution in the compartment and velocity distribution and mass flow rate of flow through a natural smoke vent for a reduced-scale model of a theater stage. Then, the mass flow rate of outflow through the natural smoke vent in the event of a fire for a real-scale theater stage was examined. The case with the larger natural smoke vent area and central fire source location showed lower temperature distributions and higher mass flow rates of outflow and inflow than the case with the smaller natural smoke vent area and side fire source location. The trends of the temperature distributions were closely related to those of the mass flow rates for the outflow and inflow. Additionally, the case with the larger natural smoke vent area and central fire source location exhibited the most non-uniform flow velocity distribution in all cases tested. A bidirectional flow, in which the outflow and inflow occur simultaneously, was observed through the natural smoke vent. In the event of a fire situation in a real-scale theater stage, it was predicted that the case with the larger natural smoke vent area and central fire source location would have a mass flow rate of outflow that is 43.53 times higher than that of the case with the smaller natural smoke vent area and side fire source location. The present results indicate that the natural smoke vent location should be determined by considering the location in a theater stage where a fire can occur.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.184-191
• /
• 2016

In recent years, there are a number of studies that have been carried out to explore the alternative for Mineral Oil (MO) as dielectric insulating fluid in transformers due to the increasing tight regulation on safety and environment. Vegetable oils have been identified as suitable candidate since it is biodegradable, non-toxic and high flash/fire points which ensure more in-service safety. Among the types of vegetable oils considered for transformers application are Palm Oil (PO) and Coconut Oil (CO). This paper presents an experimental study on the lightning breakdown voltages of PO and CO under non-uniform electric field based on needle-sphere electrodes configuration at 3 small gap distances. The type of PO used in this study is Refined Bleached and Deodorized Palm Oil (RBDPO) Olein. The main focus of this study is to examine the lightning breakdown performance of RBDPO and CO under different test conditions and assess its suitability as dielectric insulating fluid in transformers. The effect of voltage polarities (positive and negative) and testing methods (rising-voltage, up-and-down and multiple-voltage) were investigated. The data obtained from all tests were analysed by Weibull distribution in order to determine the withstand voltages for each type of oils. It was found that the breakdown voltages of RBDPO and CO are comparable with MO under positive lightning impulse. Under negative lightning impulse, the breakdown voltage of MO is slightly higher than RBDPO and CO. There is no significant effect of testing methods and voltage polarities on lightning breakdown voltages of RBDPO and CO. Based on the statistical analysis, it is found that the breakdown voltages of RBDPO and CO at 1% probability are slightly lower than MO.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 산업계
• /
• pp.135-141
• /
• 2009

This technology is able to construct with hardening UREPALT adhesives and TPO URE-Sheet simultaneously using automatic equipments. the benefit of this construction method is that The layer of waterproofing is uniform and defect of construction would be reduced because of no construction joints between UREPALT adhesives and TPO URE-Sheet. Furthermore, this new method could accomplish shortening of construction period, quality control and saving of labor costs. Also the non-exposure waterproofing method would be protected from fire and safe for workers without using a torch.

• 한국시뮬레이션학회논문지
• /
• 제19권2호
• /
• pp.63-72
• /
• 2010

미래전장에서 대화력전(Counter Fire)의 중요성은 더욱 부각되고 있다. 대화력전은 적 화력자산과 이를 지휘통제하는 모든 요소를 타격하여 적의 화력자산의 능력과 전투지속능력 및 전의를 약화시키는 화력전투를 말한다. 대화력전은 크게 공세적 (Proactive) 대화력전과 대응적(Reactive) 대화력전으로 구분된다. 지금까지의 연구들을 보면 공세적 대화력전의 탐지수단인 UAV(Unmanned Aerial Vehicle:무인항공기)에 대한 운용효과 연구는 지속적으로 발전되고 있지만, 대응적 대화력전 탐지수단인 포병 표적탐지 레이더에 대한 운용효과를 계량적으로 분석한 결과는 없는 실정이다. 이에 본 연구에서는 운용중인 포병 표적탐지 레이더의 운용효과를 C2(Command & Control : 지휘통제)이론과 행위자 기반 시뮬레이션인 MANA(Map Aware Non-uniform Automata)모델을 이용하여 계량적으로 분석 제시함으로써 표적탐지레이더 운용 효과를 구체적으로 보여주었다.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.127-136
• /
• 2017

우리나라는 1994년 "응급의료에 관한 법률"이 제정되면서 응급처치 교육이 본격적으로 시행되는 계기가 마련되었다. 현재 일반인 대상 AED내용이 포함된 응급처치 교육이 이루어지고 있으나 일반인의 AED사용 실적은 매우 미흡한 실정이다. 이에 대한 원인으로 획일화된 BLS교육에 문제점이 있는 것으로 판단하였다. 선행연구를 통해 AED사용 의향을 저해하는 개인적 사회적 요인을 파악하였으며 이를 개선된 BLS교육에 반영하였다. 연구 결과로 대상자 총 481명 중 기존 AED사용 의향이 없던 대상자는 200명(41.6%)이었으며, 개선된 BLS교육 후 43명(8.9%)으로 감소하였다. AED사용 의향을 높이기 위한 구체적 방안으로 교육 후에는 AED위치 교육에 대한 필요성이 가장 높게 나타났으며, 이를 토대로 AED교육 시 정확한 내용의 전달이 무엇보다도 중요하고, 더불어 생활 주변 AED의 위치인식에 대한 교육도 함께 이루어져야 하겠다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권10호
• /
• pp.3475-3489
• /
• 2014

Here we present a simple flame detection method for an infrared (IR) thermal camera based real-time fire surveillance digital signal processor (DSP) system. Infrared thermal cameras are especially advantageous for unattended fire surveillance. All-weather monitoring is possible, regardless of illumination and climate conditions, and the data quantity to be processed is one-third that of color videos. Conventional IR camera-based fire detection methods used mainly pixel-based temporal correlation functions. In the temporal correlation function-based methods, temporal changes in pixel intensity generated by the irregular motion and spreading of the flame pixels are measured using correlation functions. The correlation values of non-flame regions are uniform, but the flame regions have irregular temporal correlation values. To satisfy the requirement of early detection, all fire detection techniques should be practically applied within a very short period of time. The conventional pixel-based correlation function is computationally intensive. In this paper, we propose an IR camera-based simple flame detection algorithm optimized with a compact embedded DSP system to achieve early detection. To reduce the computational load, block-based calculations are used to select the candidate flame region and measure the temporal motion of flames. These functions are used together to obtain the early flame detection algorithm. The proposed simple algorithm was tested to verify the required function and performance in real-time using IR test videos and a real-time DSP system. The findings indicated that the system detected the flames within 5 to 20 seconds, and had a correct flame detection ratio of 100% with an acceptable false detection ratio in video sequence level.

• 한국멀티미디어학회논문지
• /
• 제18권10호
• /
• pp.1197-1204
• /
• 2015

Smoke detection plays an important role for the early detection of fire. In this paper, we suggest a newly developed method that generated LBPV(Local Binary Pattern Variance)s as special feature vectors from RGB contrast images can be applied to detect smoke using SVM(Support Vector Machine). The proposed method rearranges mean value of the block from each R, G, B channel and its intensity of the mean value. Additionally, it generates RGB contrast image which indicates each RGB channel’s contrast via smoke’s achromatic color. Uniform LBPV, Rotation-Invariance LBPV, Rotation-Invariance Uniform LBPV are applied to RGB Contrast images so that it could generate feature vector from the form of LBP. It helps to distinguish between smoke and non smoke area through SVM. Experimental results show that true positive detection rate is similar but false positive detection rate has been improved, although the proposed method reduced numbers of feature vector in half comparing with the existing method with LBP and LBPV.