• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.147-159
• /
• 2008

Objectives : In order to investigate the relation of body composition analysis and isokinetic trunk muscle strength for the screening test of low back pain. Methods : This study was carried out with the data from comprehensive medical testing. 75 subject aged 20-59 performed the segmental bioelectrical impedance analysis, isokinetic trunk muscle strength test and questionnaire. Then we analyzed the relationship of data. Results : Low back pain(LBP) prevalence in high obesity index(Body mass index(BMI), Percentage of Body Fat(PBF), Waist Hip Ratio(WHR)) group was higher than LBP prevalence in normal obesity index group(p<0.001). In LBP group, Extension Peak Torque(Ext.PT), Extension Peak Torque per Body Weight(Ext.PT/BW) were significantly lower than Non-LBP group(p<0.001). And 90% of LBP group indicated abnormal Extension-Flexion Ratio(E/F ratio)(1.0 < Normal E/F ratio <1.6). When it comes to analyze relation between obesity index and muscle strength, Ext.PT/BW was significantly decreased according to PBF, WHR score. And correlation coefficient in Flex.PT, Flex.PT/BW, Ext.PT, Ext.PT/BW and PBF showed decreasing function. Conclusions : Results from this investigation showed positive correlation between obesity and LBP prevalence. Decreased muscle strength and inbalanced E/F ratio were shown in LBP. Trunk muscle strength was changed according to body mass composition parameters. This results are expected to contribute to prevent and diagnose LBP by application the clinical index of body composition analysis.

• Journal of agricultural medicine and community health
• /
• v.38 no.2
• /
• pp.108-115
• /
• 2013

Objective: This study aimed to examine the effects of chronic disease management program based on clinics for blood pressure control or glycemic control in patients with hypertension or type 2 diabetes mellitus in Incheon. Methods: An observational follow up study was done on 11,501 patients registrated at clinics from January 1st to December 31st, 2010 in Incheon. Experience of education and mandatory laboratory tests were assessed with the registration data and income status was identified by National Health Insurance data. The odds ratio and 95% confidence intervals were derived from logistic regression models. Results: The experience of education has a positive effect for blood pressure control in the non-control group with hypertension at the time of registration (Odds ratio 1.357, confidence intervals: 1.112~1.655). The experience of mandatory laboratory tests has a positive effect for blood pressure control in the control group with hypertension at the time of registration (Odds ratio 1.738, confidence intervals: 1.387~2.178). But the effects of the experience of education and mandatory laboratory test in patients with type 2 diabetes mellitus were not identified. Conclusions: This study revealed the relationship between the experience of education or mandatory laboratory testing and blood pressure control in patients with hypertension.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.27 no.1
• /
• pp.39-47
• /
• 2016

Objectives: The aim of this study was to examine the association between current suicidal or violent behavior and deficits of specific neurocognitive variables in child and adolescent inpatient samples diagnosed with mood disorder. Methods: A retrospective review of the charts of mood disorder patients hospitalized at Samsung Medical Center between April 2004 and April 2015 was conducted. Child and adolescent patients aged between 10 and 18 years old and those who finished neurocognitive function testing during their hospitalization were included. Among them patients whose full scale IQ was between 85 and 115 were selected (N=111). Participants were first divided into two age-groups-group Y ($10{\leq}age{\leq}15$, N=54) and group O ($16{\leq}age{\leq}18$, N=57)-because neurocognitive function test tools were different according to age [Wechsler Intelligence Scale for Children (WISC) for 10 to 15-year-old patients, Wechsler Adult Intelligence Scale (WAIS) for 16 to 18-year-old patients]. They were then divided according to their suicidal or violent behavior-non suicidal/violent group (NG), suicidal group (SG), violent group (VG), and both suicidal/violent group (BG). The Child Behavior Checklist (CBCL) was checked for measurement of participants' behavior and the Gordon Diagnostic System was checked for measurement of their attention efficiency. Kruskal-Wallis Test and Tukey test was used to determine the differences in neurocognitive function between groups. Results: O-SG patients showed lower scores on the comprehension subscale of WAIS-III than O-NG patients (${\chi}^2=8.454$, p=.015). O-VG patients showed lower scores on the block design subscales of WAIS than O-SG patients (${\chi}^2=7.496$, p=.024). Y-VG patients showed higher scores in aggressive behavior, externalizing problems, and total problems scores of CBCL. Conclusion: This study showed relationship between specific neurocognitive deficits and suicidal or violent behavior. These relationships were significant in relatively older adolescents.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.206-215
• /
• 2017

Objectives: To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide ($Al_2O_3$) particles at different pressures. Materials and Methods: Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and ${\chi}^2$ tests (${\alpha}=0.05$). Results: The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure. Conclusions: CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.531-541
• /
• 2018

Purpose : To evaluate the acute cytotoxic effect of polyhexamethylene biguanide (PHMB), epigallocatechin gallate (EGCG) and PHMB/EGCG mixture on the cultured human corneal epithelial cell (HCEpiC). Methods : HCEpiCs were cultured in the media of HCEpiC containing 0.00001~0.005% PHMB, 0.001~5% EGCG and 0.00005% PHMB/0.05% EGCG mixture respectively for 30, 60, 120 and 240 min. Cultured HCEpiCs were fixed and stained with Draq5 and cell viability and apoptosis were evaluated using confocal microscope and ImageXpress $Ultra^{TM}$. Results : Cultured HCEpiC did not show cytotoxic effect at below 0.00005% PHMB and below 0.05% EGCG concentration. In the media containing 0.00005% PHMB/0.05% EGCG, acute cytototoxic effect was not found, whereas damaged HCEpiCS were increased and survival cells were decreased in the media incubated for 240 min. Conclusion : The mixture of 0.00005% PHMB/0.05% EGCG showed non acute cytotoxic effect on the cultured HCEpiCs, however it is needed to investigate its chronic cytotoxic effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.35-42
• /
• 2019

Risk assessment and analysis for a medium-to-small sized chemical plant that manufactures a polyester resin by the process of batch-type condensation reaction was conducted using K-PSR technique which is one of the risk assessment methods used to implement the Process Safety Management System (PSM). K-PSR is a risk assessment technique developed by KOSHA to compensate for difficulties caused by the lack of infrastructure of medium-to-small sized chemical plants in the re-evaluation. To apply the K-PSR technique, the entire process of a selected chemical palnt was classified in two review sections, i.e., the condensation reaction process and the dilution/filtration process, and the potential risks of the process about these review sections were identified and classified based on the four guide-words (release, fire.explosion, process trouble, and injury). As the results of the research, refer to recommend of risk rating has been confirmed that non-destructive testing of old facilities and the preparation of LOTO procedures for the electrical equipments are necessary as specific measures to prevent the risk of release and fire.explosion. It was also shown that pressure gauges and thermometers should be installed on the hot-oil supply piping to minimize the process trouble, and exhausting hood should be installed to prevent potential injury.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.648-655
• /
• 2019

This paper proposes the differential development of a Taekwondo electronic body protector. For this development, the most suitable sensor system was selected after analyzing and testing various sensor methods (magnetic sensors, electric capacity sensors, contact switch sensors, and piezo-film sensors) that could be applied in the electronic body protector, the selected sensors were distributed to the body and feet to make a more precise hit score, unlike the existing system in which all sensors are centralized on the body. Furthermore, it aims to illuminate using a lightweight film-type piezoelectric sensor on the body protector. In the case of an existing electronic body protector, all sensors and network device were concentrated on the body protector, so users need to purchase a set if they want it. On the other hand, the proposed system cloud can be used individually using a smart scoring WEP program. The effects of decreasing weight by up to 20% were compared with those of the existing system. Setting up a test facility is very difficult, so more study will be needed to analyze the effects of a hit.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.108-117
• /
• 2023

Background: When particles are absorbed into the human body, they penetrate deep into the lungs and interact with the tissues of the body. Heavy metals in PM_2.5 can cause various diseases. The main source of PM_2.5 emissions in South Korea's atmosphere has been surveyed to be places of business. Objectives: The concentration of heavy metals in PM_2.5 near the Ulsan Industrial Complex was measured and a health risk assessment was performed for residents near the industrial complex for exposure to heavy metals in PM_2.5. Methods: Concentrations of heavy metals in PM_2.5 were measured at four measurement sites (Ulsan, Mipo, Onsan, Maegok) near the industrial complexes. Heavy metals were analyzed according to the Air Pollution Monitoring Network Installation and Operation Guidelines presented by the National Institute of Environmental Research. Among them, only five substances (Mn, Ni, As, Cd, Cr⁶⁺) were targeted. The risk assessment was conducted on inhalation exposure for five age groups, and the excess cancer risk and hazard quotient were calculated. Results: In the risk assessment of exposure to heavy metals in PM_2.5, As, Cd, and Cr⁶⁺ exceeded the risk tolerance standard of 10^-6 for carcinogenic hazards. The highest hazard levels were observed in Onsan and Mipo industrial complexes. In the case of non-carcinogenic hazards, Mn was identified as exceeding the hazard tolerance of 1, and it showed the highest hazard in the Ulsan Industrial Complex. Conclusions: This study presented a detailed health risk from exposure to heavy metals in PM_2.5 by industrial complexes located in Ulsan among five age groups. It is expected to be utilized as the basis for preparing damage control and industrial emission reduction measures against PM_2.5 exposure at the Ulsan Industrial Complex.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.71-83
• /
• 2009

Shotcrete is an important primary support for tunnelling in rock. The quality control of shotcrete is a core issue in the safe construction and maintenance of tunnels. Although shotcrete may be applied well initially onto excavated rock surfaces, it is affected by blasting, rock deformation and shrinkage and can debond from the excavated surface, causing problems such as corrosion, buckling, fracturing and the creation of internal voids. This study suggests an effective non-destructive evaluation method of the tunnel shotcrete bonding state applied onto hard rocks using the impact-echo (IE) method and ground penetration radar (GPR). To verify previous numerical simulation results, experimental study carried out. Generally, the bonding state of shotcrete can be classified into void, debonded, and fully bonded. In the laboratory, three different bonding conditions were modeled. The signals obtained from the experimental IE tests were analyzed at the time domain, frequency domain, and time-frequency domain (i.e., the Short- Time Fourier transform). For all cases in the analyses, the experimental test results were in good agreement with the previous numerical simulation results, verifying this approach. Both the numerical and experimental results suggest that the bonding state of shotcrete can be evaluated through changes in the resonance frequency and geometric damping ratio in a frequency domain analysis, and through changes in the contour shape and correlation coefficient in a time-frequency analysis: as the bonding state worsens in hard rock condition, the autospectral density increases, the geometric damping ratio decreases, and the contour shape in the time-frequency domain has a long tail parallel to the time axis. The correlation coefficient can be effectively applied for a quantitative evaluation of bonding state of tunnel shotcrete. Finally, the bonding state of shotcrete can be successfully evaluated based on the process suggested in this study.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1057-1065
• /
• 2023

Non-invasive liver fibrosis diagnosis is crucial for patients with chronic liver diseases. Many patients cannot undergo liver tissue biopsy, so predicting the degree of liver fibrosis early through meaningful methods can reduce complications related to chronic liver diseases, such as liver cell carcinoma and cirrhosis. This study compared and analyzed the quantitative measurement of liver fibrosis using shear wave elastography in conjunction with liver ultrasound findings and their associations with serum biomarkers (p<0.05). The results showed that the shear wave elastography measurement in the normal group was 4.55 ± 0.69 kPa, while the abnormal contrast group with echogenic patterns had a measurement of 8.27 ± 1.83 kPa. The hepatitis B carrier group exhibited higher shear wave elastography measurements, and among serum biomarkers, AST, ALT, GGT, and PT showed statistically significant positive correlations with fibrosis severity according to SWE categories (p<0.05), while ALP and TB did not demonstrate statistically significant differences (p=0.163, p=0.567). Conversely, Albumin and PLT showed significant negative correlations (p<0.05). Clinically, utilizing shear wave elastography measurements through liver ultrasound in the tracking and repeat testing of liver fibrosis in chronic hepatitis B patients without cirrhosis can assist in achieving more objective diagnoses among healthcare providers.