• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.177-181
• /
• 2013

In this paper, silicon solar cells are analyzed regarding power conversion efficiency by changed capacitance in the depletion region. For the capacitance control in the depletion region of silicon solar cell was applied for 10, 20, 40, 80, 160 and 320 Hz frequency band character and alternating current(AC) voltage with square wave of 0.2~1.4 V. Academically, symmetry formation of positive and negative change of the p-n junction is similar to the physical effect of capacitance. According to the experiment result, because input of square wave with alternating current(AC) voltage could be observed to changed capacitance effect by indirectly method through non-linear power conversion (Voltage-Current) output. In addition, when input alternating current(AC) voltage in the silicon solar cell, changed capacitance of depletion region with the forward bias condition and reverse bias condition gave a direct effect to the charge mobility.

• 자원ㆍ환경경제연구
• /
• 제27권2호
• /
• pp.363-397
• /
• 2018

We study the impact of loss-aversion and the threat of critical damages from insufficient pollutant abatement, which we jointly call threshold concerns, on the outcome of international environmental agreements. We aim to understand whether concerns for a critical level of damages induce cooperation among countries faced with the well-known free-riding problem, and yield sufficient emission reductions to avoid exceeding the threshold. Specifically, we focus on loss-averse countries negotiating under the threat of either high or low environmental damages. Under symmetry, when countries display identical degrees of threshold concern, we show that such beliefs have a positive effect on reducing the emission levels of both signatories to the treaty and non-signatories, leading to weakly larger coalitions of signatories than in the absence of reference dependence. We then introduce asymmetry, by allowing countries to differ in the degree of concern about the damages. We show that stable coalitions are mostly formed by the countries with higher threshold concerns. When enough countries exhibit standard preferences, the coalition size may diminish, regardless of the degree of concern by the others.

• 한국광학회지
• /
• 제12권3호
• /
• pp.230-234
• /
• 2001

반전대칭이 없는 광굴절결정에 있어 위상접합이 만족되지 않은 상태에서 발생된 제2고조파의 세기가 외부전기장에 의존한다는 사실을 이용하여 광굴적결정의 광굴절율 변형현상에 관한 중요상수를 측정할 수 있는 방법을 개발하였다. 마커무늬의 전기장의존도에 관한 근사식을 구하였고 이를 이용하여 제2고조파의 세기변화로부터 공간전하장의 크기를 측정할 수있었다. 실험적으로 congruent $LiNbO_3$에 빛을 두가지 다른 세기로 비추어 유도되는 공간저하장의 시간의존성을 조사하였고 측정결과를 근사식과 비교분석하여 $LiNbO_3$의 광기전력상수, 암전도상수 및 광전도상수를 결정할 수 있었다.

• Computers and Concrete
• /
• 제8권1호
• /
• pp.43-57
• /
• 2011

Force-deformation modelling of cracked reinforced concrete is essential for a displacement-based seismic assessment of structures and can be achieved by fibre-element analysis of the cross-section of the major lateral resisting elements. The non-linear moment curvature relationship obtained from fibre-element analysis takes into account the significant effects of axial pre-compression and contributions by the longitudinal reinforcement. Whilst some specialised analysis packages possess the capability of incorporating fibre-elements into the modelling (e.g., RESPONSE 2000), implementation of the analysis on EXCEL is illustrated in this paper. The outcome of the analysis is the moment-curvature relationship of the wall cross-section, curvature at yield and at damage control limit states specified by the user. Few software platforms can compete with EXCEL in terms of its transparencies, versatility and familiarity to the computer users. The program has the capability of handling arbitrary cross-sections that are without an axis of symmetry. Application of the program is illustrated with examples of typical cross-sections of structural walls. The calculated limiting curvature for the considered cross-sections were used to construct displacement profiles up the height of the wall for comparison with the seismically induced displacement demand.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 추계 총회 및 학술발표회
• /
• pp.39-45
• /
• 1997

Introduction : Polyimides are one of the most important classes of the high performance polymers due to their excellent electrical, thermal, and high-temperature mechanical properties. But their uses are limited because of their poor solubility. Most polyimide derivatives are processed in the form of polyamic acids, which are subsequently converted into the imide structures.Recently, it has been found that the soluble polyimides with large molecular weight sufficient to application. For enhancing processability, the majority of approaches have involved the following factors. As much as, the separation of the imide ring along the back-bone, that is to say, reducing the density of imide ring in the repeat structure. The introduction of bulky substituents along the back-bone, in order to enhance the free volume of main-chain. The incorporation of flexible or thermally stable linkages in the main-chain, reducing the packing force. The disruption of symmetry or recurrence regularity through copolymerization in order to reduce crystallnity.The objectives of this investigation are the synthesis and characterization of soluble polyimides as membrane materials by the single-step polymerization and the preparation of the asymmetric polyimide membrane by using phase inversion technique. In the present study, three series of polyimide derivatives are synthesized; H series is homopolyimides, A series is prepared from single dianhydride and two diamines, B series is yielded from two dianhydrides and a diamine. The dope solution was directly prepared from the PI solution via one step polymerization from monomers.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.230-235
• /
• 2000

The extrusion process for long-length multi-filaments of BSCCO 2223 superconductor tape has been investigated with aids of Finite Element Method and experimental inspection. Since the arrangement of filaments in matrix material has characteristic of rotational symmetry, a 2-dimensional commercial FEM package, DEFORM-2D, was adopted to simulate extrusion process with different variables such as hardness of sheath material, lengths of each filament and arrangement. From the FEM analysis, since the inner filaments move faster than the outer one, distribution of filaments is needed to be optimized. In the case of pure Ag matrix, undesirable non-uniform distribution of filament was obtained due to low hardness of sheath material. Dummy sample(brass (sheath) and talc powder(filament)), however, which has relatively high hardness of sheath material, had been produced with desirable results. Therefore, it is necessary to optimize hardness of sheath material, extrusion temperature and billet design.

• 한국광물학회지
• /
• 제1권1호
• /
• pp.15-19
• /
• 1988

In the process of re-checking the phase relations of the Pt-Sb system the previously reported Pt4+Sb phase did not occur. Instead, Pt34Sb7 phase with an average chemical composition (wt%) Pt 89.3, Sb 11.4, total 100.7, has been newly found to exist, and the formula Pt34Sb7 has been tentatively assigned to it, It is pale brownish grey to yellowish grey under refloecting microscope and non-bireflectant, VHN100=225 (206-243). X-ray powder patterns are (d(I/Io)): 2.318(100), 2.293(100), 2.110(30), 1.440(50), 1.390(15), 1.283(5), 1.203(70) and 1.192(40)$\AA$. They are indexable on the basis of tertragonal cell with $\alpha$=3.948(3), c=16.85(1)$\AA$. A question whether the tetragonal Pt34Sb7 is the new phase or a polymorph of the cubic Pt4+Sb phase remains unclear and awaits better X-ray diffraction, electron microprobe analysis and DTA for the Pt4+Sb phase. The Pt3Sb phase reported to be of tetragonal symmetry has been confirmed to exist. It is greyish yellow in air and in oil, very weakly bireflectant, and weakly anisotropic. VHN25=216 (183-240). Its X-ray powder data have been successively indexed on a tetragonal cell with $\alpha$=3.9455(7), c=16.959(5)$\AA$.

• 대한방사선치료학회지
• /
• 제7권1호
• /
• pp.15-31
• /
• 1995

The radiosurgery treatment is one time, non surgical approach to the treatment of patients with intracranial disorders whose conditions would be difficult or dangerous to treat with conventional sugical procedures. The LINAC based radiosurgery is based on the combination of multiple isocentric arc irradiation with small fields centered in the stereotactic target. The absorption of the beam in a tissue equivalent medium, such as water, as well as the uniformity, or profile, of the beam must be precisely documented. The beam characteristics and dosimetric measurememts of the 6MV X-ray beam from a ML-6M linear accelerator are examined. The percent depth dose (PDD) and beam profile (including flatness, symmetry and penumbra) is calibrated with the radiosurgery cone in water phantom. The cone is made of lead which size is from $10{\times}10mm{\phi}$ to $30{\times}30mm{\phi}$ All of these dosimetric measurements sufficiently characterized the beam to permit safe clinical use.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.446-449
• /
• 2000

A direct RTI(Rotation and translation invariant) fingerprint identification is proposed using the GCMs(generalized complex moments) and Gabor filter-based features from the grey level fingerprint around core point. The core point is located as reference point for the translation invariant matching. And its symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then, fingerprint is divided into non-overlapping blocks with respect to the core point and, in contrast to minutiae-based method using various processing steps, features are directly extracted from the blocked grey level fingerprint using Gabor filter, which provides information contained in a particular orientation in the image. The Proposed fingerprint identification is based on the Euclidean distance of the corresponding Gabor features between the input and the template fingerprint. Experiments are conducted on 300 ${\times}$ 300 fingerprints obtained from the CMOS sensor with 500 dpi resolution, and the proposed method could obtain 97% identification rate.

• Journal of the Korean Data and Information Science Society
• /
• 제20권3호
• /
• pp.475-483
• /
• 2009

본 연구에서는 한국종합주가지수 데이터를 이용하여 다양한 비선형 시계열 모형들을 소개하였다. 조건부 평균의 선형 모형으로는 상수항 모형, 자기회귀 모형을 살펴보았으며, 비선형 모형으로는 분계점 자기회귀 모형, 지수적 자기회귀 모형을 살펴보았다. 조건부 분산 모형으로는 일반 자기회귀 이분산 모형과 지수적 일반 자기회귀 이분산 모형, Glosten 등 (1993)의 모형 그리고 일반화 이항멱변환 분계점 일반 자기회귀 이분산 모형을 살펴보았다. 한편, 일반화 이항멱변환 분계점 일반 자기회귀 이분산 모형은 대표적 비대칭성 이분산성 모형인 Zakoian (1993) 모형과 Li와 Li (1996) 모형을 효과적으로 통합할 수 있는 변형된 모형이다. 본 연구에서는, 한국종합주가지수 데이터를 분석하여 새로운 모형의 효율성을 증명하였다.