• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.29-33
• /
• 2008

As the measures of nuclear power plant utilities and manufacturers to reduce the defects of tube expansion region during manufacturing steam generators, many types of NDEs(Non-Destructive Examinations) are conducted to inspect the expansion region. The expansion region of tube is subject to degrade because of stress concentration induced by tube expansion, sludge pile and high temperature. So the inspections for tube expansion region have been reinforced. Liquid penetrant test, helium leak test, Bobbin profile test and hydraulic test are performed to confirm the integrity of tube expanded by hydraulic expansion method. Liquid penetrant test and helium leak test are used to inspect seal weld region on tubesheet end part. Bobbin Profile test is used to inspect fully the expanded region of steam generator tube. Hydraulic test finally verifies the integrity of seal weld region on tubesheet end part.

• 한국연초학회지
• /
• 제6권1호
• /
• pp.51-62
• /
• 1984

The chemical components of non-blended and blended cigarettes and their smoke have been analyzed to investigate the correlation between them. Some regression of linear equations were obtained based on the simple correlation data(r), for the various smoke components such as tar, nicotine, nitrogen dioxide, steam volatile phenols, formaldehyde, acetaldehyde, acrolein and hydrogen cyanide. Chi-square tests were carried out to observe the probabilities of the values estimated by the regression of linear equations. The probabilities of the greater values were 0.900-0.999 to tar, nicotine, formaldehyde, acetal dehyde, acrolein, steam volatile phenols, nitrogen dioxide and hydrogen cyanide of the non-blended cigarettes, and 0.900-0.999 to tar, nicotine, nitrogen dioxide, steam volatile phenols and static burning rate (SBR) of the blended cigarettes.

• 한국표면공학회지
• /
• 제35권6호
• /
• pp.363-370
• /
• 2002

Empirical equations for the oxide thickness and the weight gain of Zircaloy-4 cladding during the oxidation in high temperature, high pressure steam have been developed. Firstly, the empirical equations for oxide thickness in 1 atm steam in 700~100$0^{\circ}C$ were made, then, the enhancement factor for the steam pressure effects on Zircaloy-4 cladding oxidation in high temperature steam was added. Based on the analysis of the weight fraction of dissolved oxygen in metal layer, empirical equations for the weight gain of Zircaloy-4 in high pressure, high temperature steam were developed. We compare the developed empirical equations with the Baker-Just correlation. The Baker-Just correlation can give a non-conservative estimation of oxidation of Zircaloy-4, depending on the steam pressure. These developed empirical equations can be used for the correct estimation of oxidation of Zircaloy-4 during accident analysis.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.211-222
• /
• 2017

In this study, we investigated the dyeing properties of the ultra-fine nylon suede non-woven fabric with Sulphur black dye regarding to the effect of dye concentrations, reducing agent contents, sodium carbonate contents, antioxidant contents, immersion temperature and exposure time in air by pad-steam process. The optimal conditions of dyeing for the ultra-fine nylon suede non-woven fabric were determined with dye concentration of 30% o.w.f., reducing agent content of $9{\sim}13g/{\ell}$, sodium carbonate content of $1{\sim}4g/{\ell}$, antioxidant content of $1{\sim}5g/{\ell}$, immersion temperature of $70^{\circ}C$, exposure time of 20 minutes in air and immersion time of 1 minute, respectively. Meanwhile, the colorfastness to washing, the colorfastness to light, and the colorfastness to perspiration for dyed ultra-fine nylon suede non-woven fabric were achieved in the range of 4-5 grades. The formaldehyde and arylamine were not detected on the ultra-fine nylon suede non-woven fabric by KC tests.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.31-37
• /
• 2016

In the steam system, a stream trap valve discharges a condensate and a non-condensable gas. It also prevents stream from being leaked. The free float stream trap valve is a mechanical type of stream trap. The valve is opened when a hallow ball is floated due to the density of the condensate through the condensate flows into the valve. On the other hand, when the flow of the condensate is completed, the valve is closed as the float subsides due to the weight of the structure and the stream is blocked. In addition, the bimetal lifts the hallow ball, which discharges the non-condensable gas. In this study, the performance of the properties of the free float stream trap valve, the method of support for three points, and the orifice design are researched. Moreover, the condensate discharge capacity of the free float stream trap valve is calculated from the experiment.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.302-307
• /
• 2017

An electric steam boiler equipped with a condensate recovery system, which stores the condensate generated after using steam in steam washers, steam cookers, steam irons, and steam cleaners in a condensate tank and supplies compressed air to the condensate tank so that the condensate is recovered to the boiler by the pressure of the compressed air, was studied. In the results of this study, the heat energy balance between the quantity of the heat generated by the non-metallic surface heating element and the quantity of the heat absorbed by the water was good in a range of ${\pm}5%$. In addition, the heat transfer rate increased in proportion to the electric power of the surface heating element heater, the waste heat energy was normally recovered by the recovery of the condensate of the steam boiler equipped with the high compression waste heat recovery system, and the recovery rate of the waste heat exhibited 23%.

• 공학교육연구
• /
• 제23권5호
• /
• pp.68-75
• /
• 2020

In order to cultivate the talents acquired in the fourth industrial revolution, developed countries' government are actively engaged in the campaigns encouraging K-12 students to participate in the maker movement. Maker education is regarded as one possible solution based on high tech in the era of the 4th Industrial Revolution, and it is spreading widely along with STEM education. In South Korea, STEAM education was actively conducted nationwide, and since 2017, STEAM and maker education have been linked showing mutual development. However, compared to STEAM education linked to the curriculum, comparison and activity-based research on maker education for teenagers is still insufficient. Therefore, this study aimed to suggest implications for STEAM education and maker education by analyzing the motivation of Korean youth to participate in maker activities. The subjects of this study are high school students who participated in maker education programs in student community for the first time in Korea. In this study, students were classified into engineering-related career group and non-engineering-related career groups based on their career intentions, and the motivation and understanding of participation in maker activities were compared. As a result of the study, male students participated more in maker education community activities than female students, and the engineering-related career group had a higher intention to participate in games, outdoor activities, IT equipment, digital production, and electrical/electronic production activities than the non-engineering-related career group. In addition, in the fields of handicraft/art, home baking, installing, and horticultural agriculture, there was no difference in the intention of participate in the engineering-related career group and the non-engineering-related career group. It was found that the engineering-related career group believed that there was a strong relationship between the maker education community activity, career exploration and future career choice, while the non-engineering-related career group believed that the relationship is less strong. It was also found that the engineering-related career group was participating more actively in the maker activity than the other group.

• 한국식품저장유통학회지
• /
• 제22권3호
• /
• pp.385-391
• /
• 2015

부추를 활용한 가용성 분말 제조에 적합한 공정 개발의 일환으로, 부추원료의 증숙처리 유무와 착즙액의 분무건조 부형제 종류에 따른 분말제품의 품질특성을 조사하였다. 생부추를 세척, 탈수, 절단 후 증숙처리($100^{\circ}C$, 3분)하거나 무처리한 다음 착즙하여 액을 얻고 여기에 부형제로 dextrin(DE=10)이나 ${\beta}$-cyclodextrin를 5% 첨가하고 분무건조하여 분말을 각각 제조하였다. 부추의 증숙처리는 착즙액 분무건조 분말의 $L^*$값은 높게 하였지만 $-a^*$값, $b^*$값, $C^*$값, $h^o$값은 낮게 하는 효과를 보였다. 분말의 수분함량과 수용성지수는 증숙처리와 부형제의 영향을 받지 않았지만, 입자크기는 증숙처리와 dextrin 첨가구에서 가장 적은 것으로 나타났다. 분말의 클로로필, 총페놀, 비타민 C 함량은 증숙처리구보다 무처리구에서 유의적으로 높은 수준을 보였으나 부형제 종류별로는 유의적인 차이를 보이지 않았다. DPPH 유리기 소거능은 증숙처리에 의해 낮아지며 무처리구에서는 ${\beta}$-cyclodextrin 첨가구가 다소 높은 경향을 보였다. 증숙처리구의 관능적 색, 냄새, 종합 기호도는 무증숙처리구보다 유의적으로 높게 평가되었으며 부형제의 영향은 크게 보이지 않았다. 이로써 부추 착즙액의 분무건조 분말의 품질은 착즙 전 증숙처리의 영향을 크게 받는 것으로 확인되었고, 부추 고유의 이화학적 품질 특성유지에는 무처리가, 관능적 기호도를 고려할 경우에는 증숙처리가 유효한 방법으로 판단되었다.

• 한국건축시공학회지
• /
• 제21권2호
• /
• pp.97-104
• /
• 2021

본 연구에서는 산업부산물을 전량 활용하여 포틀랜드 시멘트를 대체할 수 있는 비소성 시멘트 개발을 목표로 하였다. 이를 위해 고로슬래그 미분말과 F급 플라이애시, C급 플라이애시를 사용하여 양생방법에 따른 비소성 시멘트 모르타르의 물리적 특성에 대해 파악하였다. 연구 결과, 증기양생 후 열처리 과정을 통해 강도성능과 흡수율이 향상되는 것으로 나타났다. 결정상 분석을 통해 열처리 후 수화물의 촉진을 확인하였으며, 결합재는 치밀한 내부구조를 형성하게 된다.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.12-17
• /
• 2006

원자력발전소의 증기발생기는 수천 개의 매우 얇은 두께의 튜브로 구성되어 있다. 이러한 증기발생기의 튜브는 원자력발전소의 1차 계통과 2차 계통의 압력경계를 유지하는 데에 매우 중요한 역할을 하고 있으며, 고온 고압의 열 수력적 상호작용으로 인한 가혹한 운전조건으로 인하여 손상되기 쉽다. 따라서 증기발생기의 구조적 건전성을 평가하기 위하여 많은 시간과 노력이 투입되고 있다. 와전류 검사 방법이 증기발생기 튜브의 건전성을 평가하기 위한 가장 보편적인 비파괴 방법이지만, 와전류 검사의 특성상 결함의 전체 체적에 의하여 신호의 특성이 나타나게 되어 정확한 결함의 크기를 평가하기에는 한계가 있다. 본 연구에서는 증기발생기 튜브의 결함 검출과 정확한 측정을 위하여 초음파 검사기법의 적용 가능성을 확인하였으며, 연구결과를 증기발생기 튜브 검사에 적용 할 경우 검사결과가 크게 향상 될 것으로 기대된다.