• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.

• Korean Institute of Interior Design Journal
• /
• v.17 no.3
• /
• pp.86-93
• /
• 2008

The purpose of this study is to find out how the otherness philosophy reveals itself in the principle of F.O.A construction space creation. The traditional philosophy of totality is self-centered and thoughts are based on the subject. It couldn't escape from the world associated with the self, and has subordinated the other to the main body. But the philosophy of otherness transcends the subject, to the open, creative way of thinking which acknowledges deconstruction, decentralization, and non-hierarchy. This is very similar to contemporary architecture, which pursuits change, and also to the current state of society. In construction by the construction group F.O.A, which is doing notable activity this generation, there is an attempt to transcend the fixed subject which is seen in the otherness discussion, and realize recategorization by overcoming the boundaries of subject and object. First, by the realization of landscape architecture using a topographical folding technique, boundaries of the subject and object are demolished in the relationship of the landscape construction, and recategorization. Second, by breaking up the meaning of the surface which is a visual and physical boundary for both the internal and external, recategorization is being done. Third, by making the boundary between the interior and exterior indistinct, cognitive threshold is dissolved, and the relationship between the subject and object is being recategorization. In conclusion, we can see that the many recategorization phenomenons that are happening in the F.O.A construction show the otherness that escapes from the conventional and stationary relationship, and recognizes each other at the same time, forming new relationships.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.161-171
• /
• 2006

paper presents the results of a three-dimensional study of the natural vibration of laminated composite rectangular plates with various combinations of clamped and free boundaries. The Ritz method was used to obtain the stationary values of the associated Lagrangian, with displacements approximated using mathematicaly complete, characteristic orthogonal polynomials. The correctness of the three-dimensional model was established through a convergence study of the non-dimensional frequencies, followed by a comparison of the analytical findings in the existing literature. The wide scope of additional three-dimensional frequency results explains the influence of a number of geometrical and material parameters for angle-ply and cross-ply laminated plates, namely aspect ratio (${\mathcal{a/b}}$), thickness ratio (${\mathcal{a/h}}$), orthotropy of material, number of plies (${\mathcal{N}}$), fiber orientation angle (${\theta}$), and stacking sequence.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.703-703
• /
• 2012

대규모 하천이 많은 미국과 유럽 등은 정상 침투해석을 실시하여 제방을 설계하지만, 우리나라의 경우 상류 지역은 하천경사가 급하여 홍수지속시간이 짧고, 하류 지역은 하천경사가 완만하여 홍수지속시간이 길어 비정상 침투해석을 통해 제방을 설계한다. 설계 홍수파형을 정상상태로 해석하면 대상지점의 홍수파형이 갖는 홍수지속시간과 감수부 경사가 고려되지 않아, 상류 지역은 과대한 외력이 설정될 수 있으며, 하류 지역은 과소한 외력조건으로 과소 설계될 우려가 있어 시간에 따른 수위 변화를 고려한 비정상 침투해석이 필요하다. 비정상 침투해석을 위해서는 제방에 대한 외력조건으로 적용될 하천의 홍수파형이 필요하지만 국내에서는 홍수위와 지속시간 등 홍수파형의 시간분포에 대한 명확한 기준이 없어서 실무에서는 설계하고자하는 대상지점의 계획홍수량에 사용된 홍수파형의 계획홍수위와 홍수지속시간을 이용하여 설계홍수파형을 결정하여 사용하고 있다. 본 연구는 제방에 대한 부정류 침투해석을 위해 사용되는 설계홍수파형을 결정하는 방법을 소개하고, 우리나라 5대강 유역에 위치한 수위관측소 중 수위자료가 충분히 구축된 지점을 대상으로 과거 홍수사상 기간의 수위수문곡선과 계획홍수량 산정에 사용되었던 설계수문곡선을 이용하여 홍수파형을 결정하였다. 제방의 비정상 침투해석을 위한 설계홍수파형은 홍수지속시간과 감수부 경사로 결정된다. 본 연구에서 산정한 설계홍수파의 홍수지속시간은 대부분의 지점에서 계획홍수파의 지속시간보다 크게 산정되었으며, 실무에서 사용되는 계획홍수파의 지속시간이 과소산정되었음을 알 수 있었다. 홍수파의 감수부 경사의 경우, 본 연구에서 산정한 설계홍수파의 감수부 경사가 계획홍수파의 감수부 경사보다 비교적 완만한 것으로 나타났으며, 이는 지속시간이 긴 실제 홍수사상이 반영된 결과로 판단된다. 현재 비정상 침투해석을 위해 외력으로 설정되는 홍수파형은 계획홍수량 산정시 이용한 계획 홍수파형만을 사용한다. 이 경우 과거 홍수사상의 홍수지속시간이 반영되지 않아 안정성 측면에서 계획홍수파형과 과거 홍수를 모두 고려한 본 연구의 방법이 더 타당할 것으로 판단된다.

• Journal of Life Science
• /
• v.7 no.2
• /
• pp.107-111
• /
• 1997

To remove dissolved $NH_{4}$$^{+}$ in the aquaculture system, one ammonia oxidizing bacterium, Nitrsomonas sp. PK1, was isolated from samples collected in many aquacultural place and sludges of waste water. The stationary phase of this atrain was reached after 9 days, and the maximum $NO_{2}$ production was shown from 3 days to 9 days. In the selective medium, 0.1% of glucose was the good carbon source for growth. However, the $NO_{2}$productivity was repressed by the addition of glucose to the medium. When $Zn^{++}$ ion was supplemented to the medium, growth and the $NO_{2}$ productivity was increased, 10mM of $ZnCl_{2}$ was the optimal concentration for growth and 1 mM of $ZnCl_{2}$ was the optimal concentration for the production of $NO_{2}$, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.312-312
• /
• 2018

우리나라의 기후 지형적 특성에 따라 연강수량의 50% 이상이 여름철에 내리며 이러한 짧은 기간에 집중적으로 내리는 강수패턴 조건하에서 수공구조물 설계시 대부분 극치빈도분석을 활용한다. 우리나라의 경우 단일 Gumbel 분포를 활용한 극치빈도분석을 많이 이용한다. 하지만, 최근 이상기후로 인하여 전세계적으로 강수패턴의 특징이 급격히 변하고 있으며, 우리나라의 강수패턴 또한 바뀌어가고 있다. 연강수량의 대부분은 태풍과 장마로 인한 강수량으로 이루어져 있고, 일반적으로 두 개의 모집단으로 이루어진 형태를 보인다. 앞선 연구에서 두 개 이상의 첨두를 가지는 형태의 연최대강수량 자료에 대해 8개의 지속시간별(1, 2, 3, 6, 9, 12, 18, 24hr)로 Bayesian 기법의 단일 Gumbel 분포형과 혼합 Gumbel분포형 기반의 극치빈도분석 결과를 비교하였고, 혼합 Gumbel 분포형이 이중첨두 부분의 거동을 효과적으로 모의하는 것을 확인하였다. 본 연구에서는 이상기후로 인한 강수량의 특징의 급격한 변화에 일정한 패턴이 있음을 가정하고 이중첨두의 연 최대일강수량 자료에 대해 혼합 Gumbel 분포형 기반 비정상성 빈도분석을 실시하였다. 정상성 빈도분석과의 비교를 위해 확률분포의 매개변수 산정시 우도함수를 Bayesian 기법을 통해 산정하여 각 분포형의 Bayesian information criterion(BIC) 값을 비교하였다. 비정상성일 경우의 BIC 값이 정상성일 경우 보다 작게 산정되었고, 강수패턴이 경향성을 가지는 것으로 판단할 수 있었다. 비정상성 혼합 Gumbel 분포형 모델은 최근 급격한 강수패턴의 변화에 대한 대응책으로서 활용성이 높을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.17-17
• /
• 2019

IPCC (Intergovernmental Panel on Climate Change) 기후변화 전망보고서에 따르면 RCP 4.5 시나리오 기준, 21세기 전 지구 평균기온은 $2.5^{\circ}C$ 상승(한반도 $+3.0^{\circ}C$)하며, 전 지구 평균강수량은 4.1% 증가(한반도 +16.0%)할 것이라 전망하고 있다(기상청, 2012). 최근 기후변화와 기상이변에 따른 도심지 폭우특성이 변화하고 있음을 많은 연구결과에서 말해주고 있으며, 그 발생 빈도와 강도가 점차 증가하고 있는 추세이다. 특히, 서울시의 경우 인구와 재산이 밀집해 있어 폭우 발생에 의한 시민의 인명과 재산 피해 우려가 크다. 따라서 본 연구에서는 서울시를 대상으로 근미래(~2050년) 기후변화 하에서의 재현기간에 따른 확률강우량 변화 특성을 분석하여 비교 평가한 후 설계 강우량 산정에 활용하고자 하였다. 관측자료 기반 강수량의 변동 특성 분석과 Non-stationary GEV방법을 이용한 비정상성 빈도해석을 수행하였으며, 근미래 폭우특성 변화분석을 위하여 CMIP5 (Coupled Model Intercomparison Project 5)에 참여한 GCMs(General Circulation Models)을 활용한 강우빈도해석을 수행하였다. Mann-Kendall Test와 Quantile Regression을 통한 서울지점 여름철 강수량(June to September)과 기준강수량 초과 강수(30, 50, 80, 100mm/hr), 연간 10th 최대 강수량(Annual Top 10th Precipitation) 등을 분석한 결과 최근 증가 경향이 뚜렷하게 나타났으며, 비정상성 빈도해석에 의한 확률강우량 분석의 가능성과 신뢰성을 확인하였다. 또한 19-GCMs을 통하여 모의된 일(Daily) 단위 강수량자료를 비모수통계적 상세화(Nonparametric Temporal Downscaling) 기법을 적용하여 시간(Hourly) 강우로 다운스케일링하였으며, 서울시 미래 확률강우량에 대한 IDF 곡선(Intensity-Duration-Frequency Curve)을 작성하여 비교?분석한 결과 지속시간 1시간 강우에 대하여 재현기간 30년, 100년 조건에서 확률강우량이 약 4%~11% 수준에서 증가하고 있음을 확인하였다. 본 연구의 결과는 도심지 수공구조물의 설계빈도 영향을 진단하고, 근미래 발생가능한 확률강우량 변화에 따른 시간당 목표 강우량설정의 방법론을 제시하였다는데 의의가 있으며, 서울시의 방재성능목표 설정과 침수취약지역 해소를 위한 기후변화에 따른 수공구조물 설계 시 활용이 가능할 것으로 기대된다.

• Wind and Structures
• /
• v.23 no.3
• /
• pp.211-229
• /
• 2016

In recent years, the frequency and duration of supply interruption in electric power transmission system due to flashover increase yearly in China. Flashover is usually associated with inadequate electric clearance and often takes place in extreme weathers, such as downbursts, typhoons and hurricanes. The present study focuses on the wind-induced oscillation of conductor during the process when a downburst is passing by or across a specified transmission line. Based on a revised analytical model recently developed for stationary downburst, transient three-dimensional wind fields of moving downbursts are successfully simulated. In the simulations, the downbursts travel along various motion paths according to the certain initial locations and directions of motion assumed in advance. Then, an eight-span section, extracted from a practical 500 kV ultra-high-voltage transmission line, is chosen. After performing a non-linear transient analysis, the transient displacements of the conductors could be obtained. Also, an extensive study on suspension insulator strings' rotation angles is conducted, and the electric clearances at different strings could be compared directly. The results show that both the variation trends of the transient responses and the corresponding peak values vary seriously with the motion paths of downburst. Accordingly, the location of the specified string, which is in the most disadvantageous situation along the studied line section, is picked out. And a representative motion path is concluded for reference in the calculation of each string's oscillation for the precaution of wind-induced flashover under downburst.

• Steel and Composite Structures
• /
• v.21 no.6
• /
• pp.1183-1210
• /
• 2016

Viscoelastic sandwich structures (VSSs) are widely used in mechanical equipment, but in the service process, they always suffer from aging which affect the whole performance of equipment. Therefore, aging state recognition of VSSs is significant to monitor structural state and ensure the reliability of equipment. However, non-stationary vibration response signals and weak state change characteristics make this task challenging. This paper proposes a novel method for this task based on adaptive second generation wavelet packet transform (ASGWPT) and multiwavelet support vector machine (MWSVM). For obtaining sensitive feature parameters to different structural aging states, the ASGWPT, its wavelet function can adaptively match the frequency spectrum characteristics of inspected vibration response signal, is developed to process the vibration response signals for energy feature extraction. With the aim to improve the classification performance of SVM, based on the kernel method of SVM and multiwavelet theory, multiwavelet kernel functions are constructed, and then MWSVM is developed to classify the different aging states. In order to demonstrate the effectiveness of the proposed method, different aging states of a VSS are created through the hot oxygen accelerated aging of viscoelastic material. The application results show that the proposed method can accurately and automatically recognize the different structural aging states and act as a promising approach to aging state recognition of VSSs. Furthermore, the capability of ASGWPT in processing the vibration response signals for feature extraction is validated by the comparisons with conventional second generation wavelet packet transform, and the performance of MWSVM in classifying the structural aging states is validated by the comparisons with traditional wavelet support vector machine.