• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.311-317
• /
• 1996

Background: Following peripheral nerve injury, rats will show a tactile allodynia and hyperalgesia. But the mechanism of allodynia is still obscure. Previous studies have shown this allodynia was reversed by intrathecal alpha-2 agonists and NMDA antagonists, but not by morphine. In formalin test, either the pretreatment of NMDA antagonist or morphine prevents the hyperalgesia. The present studies, using rats rendered allodynic by ligation of the left L5 and L6 nerves, aimed to investigate the effects of pretreatment of MK-801 and morphine on the development of tactile allodynia. Methods and Material: Male Sprague-Dawley rats (100~150g) were anesthetized with halothane, the left L5 and L6 spinal nerves were ligated tightly by 6-0 black silk. For sham operation muscle dissection was performed but the spinal nerve was not ligated. For pretreatment of drugs, MK-801 (NMDA antagonist; 0.3 mg/kg). CNQX (non-NMDA) antagonist; 0.3 mg/kg), morphine (1 mg/kg) or saline (placebo) was administered subcutaneously 30 minutes before operation. A second dose was administered subcutaneously 24 hours after operation and further doses were given daily for 2 days further. The volume of injection was 5 ml/kg. To assess the mechanical allodynia, paw withdrawal thresholds of ipsilateral limb were determined using 8 von Frey hairs. Results: Within 2 days saline, CNQX or morphine injected rats developed tactile allodynia (paw withdrawal threshold was about 2g), and persisted for over 2 weeks. Pretreatment of MK-801 delayed the development of tactile allodynia for 3 days comparing to that of saline injected rat. Conclusion: NMDA receptor in the central nerve system plays an important role in the development of tactile allodynia induced by peripheral nerve injury. But the mechanism may be different from hyperalgesia developed in formalin test.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.475-480
• /
• 2011

This papers were studies the effects of high $CO_2$ concentration pretreatment and ascorbic acid on the browning of fresh-cut apples. The prepared samples were dipped in 1% (w/v) ascorbic acid solution (AA). Fresh-cut apples (3 pieces) were packed in polypropylene bags (0.03 mm, $20{\times}15$ cm), and stored at $10^{\circ}C$ for 16 days. AA-treated samples showed higher L value than those of non-treated and control (dipped in water without $CO_2$ pretreatment), while non-treated samples showed higher hardness than AA-treated sample. Total soluble solids, pH, titratable acidity were not affected by high $CO_2$ pretreatment and AA treatment. These result shows high $CO_2$ concentration pretreatment with dipping in 1% ascorbic acid solution (AA) has an effects on controlling enzymatic browning during the storage of fresh-cut 'Fuji' apples.

• Korean Journal of Veterinary Research
• /
• v.50 no.2
• /
• pp.79-84
• /
• 2010

The molecule possessing ankyrin-repeats induced by lipopolysaccharide (MAIL) protein is a novel member of the $Ikappa{\beta}$ family. In the present study, we examined the effect of norepinephrine (NE) on MAIL mRNA expression in primary cultured mouse hepatocytes and non-parenchymal liver cells. MAIL mRNA expression in hepatocytes and non-parenchymal liver cells was not directly influenced by NE. However, MAIL mRNA expression in hepatocytes was significantly induced by incubation with a culture medium of non-parenchymal liver cells, treated with NE. Pretreatment with an interleukin (IL)-1 receptor antagonist significantly attenuated the stimulatory effect of the medium. Moreover, exogenous $IL-1{\beta}$ induced MAIL mRNA expression in hepatocytes, while IL-6 and tumor necrosis factor $\alpha$ did not. The concentration of $IL-1{\beta}$ in the medium of non-parenchymal liver cells was significantly increased after NE-treatment. These results suggest that NE can induce MAIL mRNA expression in hepatocytes through $IL-1{\beta}$, released from non-parenchymal liver cells.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.04a
• /
• pp.111-112
• /
• 1998

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2000

Recently many scientists have tried to synthesize biodegradable polymers due to durable and non-biodegradable products of conventional synthetic plastics when these were wasted in nature. So to reuse the wastepapers for biodegradable polymer resources, ONP (old newsprint), OCC (old corrugated containerbpard) were carried out by the pretreatment of chlorinite, hypochlorite and oxygen-alkali treatment conditions. For manufacturing of biodegradable polymer with wastepaper, this study performed to investigate change of chemical components and optimal pretreatment condition. The summarized results in this study were as follows: Lignin content in ONP and OCC was was higher than in MOW and ash content was the highest in MOW. More amount of ash components were reduced by wet defiberation than by dry defiberation. Wet defiberation fiber are better than dry defiberated fiber in chemical pretreatment condition for wastepapers, and the best result was obtained in the condition of sodium chlorite at $70^{\circ}C$, because it has high delignification ratio, ${\alpha}$-cellulose contents and degree of polymerization in this treatment condition. Oxygen-alkali treatment condition is the worst method because of low yield, low degree of polymerization in this pretreatments.

• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.174-188
• /
• 2024

This review summarized research trends regarding sample collection methods, pretreatment method, and types of analysis devices for microplastics (MPs) in soil and groundwater matrices. Soil sampling considers the selection of sampling location, depth, and volume. The typically sampling depth is within 15 cm (topsoil), and about 1 kg of mixed each sample. Among spot sampling and continuous flow sampling, groundwater sampling mainly used a continuous flow sampling, with collection rates 2 to 6 L/min in the range of 300~1,000 L, and followed by immediate on-situ filtration. Pretreatment method, applied to soil and groundwater, consist of organic digestion and density separation. In the organic digestion method, H₂O₂ is recommended among H₂O₂, acidic, alkaline, and enzymatic method. NaCl is primarily used as a reagent in density separation. However, depending on the density of MPs, other regents can be selectively used like ZnCl₂, ZnBr₂, and etc. Representative analysis device includes Fourier Transform Infrared (FTIR) and Raman spectroscopy for non-destructive analysis and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) for destructive analysis. µ-FTIR and Raman can count MPs of larger than 10 and 1 ㎛, and analyze MPs materials. However, it is need to sufficiently remove interference, like organic matter, in spectroscopic analysis using essential pretreatment method. Py-GC/MS is being continuously researched because it doesn't require complex pretreatment method and allows quantitative analysis of specific materials.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4705-4709
• /
• 2014

Objective: To determine the accuracy of magnetic resonance imaging (MRI) in detection of metastasis in pelvic and para-aortic lymph nodes from different gynecological malignancies. Materials and Methods: This retrospective cross sectional analytic study was conducted at the Department of Diagnostic Radiology, Aga Khan University Hospital Karachi Pakistan from January 2011 to December 2012. A sample of 48 women, age range between 20-79 years, fulfilling inclusion criteria were included. All patients had histopathologically proven gynecological malignancies in the cervix, endometrium or ovary and presented for a pretreatment MRI to our radiology department. Results: MRI was 100% sensitive and had a 100% positive predictive value to detect lymph node metastasis in lymph nodes with spiculated margins and 100% sensitive with a 75% positive predictive value to detect lymph node metastasis in a lymph node with lobulated margins. The sensitivity and positive predictive value of MRI to detect heterogeneous nodal enhancement were 100% and 75% respectively. Conclusions: Our study results reinforce that MRI should be used as a modality of choice in the pretreatment assessment of lymph nodes in proven gynaecological malignancies in order to determine the line of patientmanagement, distinguishing surgical from non-surgical cases.

• KSBB Journal
• /
• v.22 no.1
• /
• pp.43-47
• /
• 2007

The effect of surfactant on the hydrolysis of used newspaper was investigated. The most suitable surfactant for the pretreatment stage was found to be NP-series surfactants among 9 kinds of non ionic surfactants. Process parameters such as surfactant concentration, mixing speed, pretreatment temperature and time were tested to optimize for maximum digestibility and 0.5%, 100rpm, 30$^{\circ}C$, and 1 h were found to be optimum, respectively. In order to maximize digestibility, substrate was pretreated with NP-20 and then the pretreated substrate was hydrolyzed by adding TW-80. The effect of surfactant on the hydrolysis of previously surfactant-pretreated newspaper was marginal. Therefore, the digestibility with the addition order of enzyme and surfactant was investigated by using surfactant only in hydrolysis stage. The results show that digestibility was more lowered as the surfactant addition after adding enzyme to substrate was more delayed.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.395-400
• /
• 2001

The objectives of this study are to establish efficient pretreatment concentration and rehydration process for the production of the high quality of freeze-dried Mook, a traditional gel food in Korea, as an instant food. Effect of immersion in sucrose solution as pretreatment before freeze-drying on the rehydration efficiency and quality characteristics was studied. The rehydration efficiency of non-treated Mook was the highest. The rehydration efficiency increased as the concentration of sucrose increased. The texture of rehydrated Mook treated in sucrose solution was decreased with increase in rehydration temperature. The Mook treated at 60% sucrose solution was somewhat similar to the market selling Mook in the quality and the treatment prevented color and texture degradation.

• Membrane and Water Treatment
• /
• v.8 no.3
• /
• pp.279-292
• /
• 2017

This study was aimed at ultrafiltration (UF) as a pretreatment before reverse osmosis (RO) within the scheme of hybrid reverse osmosis-multistage flush (RO-MSF) desalination. Seawater at elevated temperature (after MSF heat-exchangers) was used as a feed in this process. The pretreatment system was represented as a set of functionally-linked technological segments such as: UF filtration, backwashing, chemical- enhanced backwashing, cleaning, waste disposal, etc. The process represents the sequences of operating cycles. The cycle, in turn, consists of the following unit operations: filtration, backwashing and chemical-enhanced backwashing (CEB). Quantitative assessment was based on the following indicators: normalized permeability, transmembrane pressure, specific energy and water consumption, specific waste generation. UF pre-treatment is accompanied by the following waste streams: $W1=1.19{\times}10$ power of $-2m^3$ (disposed NaOCl with 0.0044% wt.)/$m^3$ (filtrate); $W2=5.95{\times}10$ power of $-3m^3$ (disposed $H_2SO_4$ with 0.052% wt.)/$m^3$(filtrate); $W3=7.26{\times}10$ power of $-2m^3$ (disposed sea water)/$m^3$ (filtrate). Specific energy consumption is $1.11{\times}10$ power of $-1kWh/m^3$ (filtrate). The indicators evaluated over the cycles with conventional (non-chemical) backwashing were compared with the cycles accompanied by CEB. A positive impact of CEB on performance indicators was demonstrated namely: normalized UF resistance remains unchanged within the regime accompanied by CEB, whereas the lack of CEB results in 30% of its growth. Those quantitative indicators can be incorporated into the target function for solving different optimization problems. They can be used in the software for optimisation of operating regimes or in the synthesis of optimal flow- diagram. The cycle characteristics, process parameters and water quality data are attached.