• 제목/요약/키워드: non-metallic minerals

검색결과 20건 처리시간 0.026초

발전소용 이중보온용 강관의 홈부식(Grooving Corrosion)에 의한 파손 분석 (The Failure Analysis of Double Pipe for Insulation Used Power Plant by Grooving Corrosion)

  • 함종오;박기덕;박성진;선일식
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제15권3호
    • /
    • pp.197-206
    • /
    • 2015
  • Failure analysis of pre-insulated pipe (SPPS 380, 400A) transporting high temperature water ($95{\sim}110^{\circ}C$) for a plant was carried out. The damaged area (${\Phi}5mm$) of pre-insulated pipe was found only on welds. The chemical composition of damaged pipe meets specification of carbon steel pipes for pressure service (KS D 3562). As results of microstructure analysis, crack propagated from outer to inside after pitting corrosion occurred on the outside surface. The non-metallic inclusion existed on the end of crack. And the non-metallic inclusion continuously and linearly formed along with the bond line of welds. Based on SEM-EDS analysis, the nonmetallic inclusions have higher Manganese (Mn) and Oxygen (O) content but sulfur (S) was not detected. As results of water quality analysis, hydrogen ion concentration and minerals like Fe, Mg, Si were in low level. But the content of dissolved oxygen (11.2 ppm) was slightly higher than that of standard. It seems that the cause of damaged pipe is grooving corrosion due to MnO inclusion formed on bond line and corrosion took place nearby welds.

울산 지역 비금속광물 및 암석 분류를 위한 원격탐사 자료처리 (Remote Sensing Data Processing of the Ulsan Area for Classification of Non-metallic Minerals and Rocks)

  • 박종남;박인석
    • 대한원격탐사학회지
    • /
    • 제7권2호
    • /
    • pp.131-147
    • /
    • 1991
  • Feature enhancement combined with some pattern recognition techiques were applied to the Remote Sensing Data for geological mapping with particular emphasis on non-me-tallic ore deposits and their related geologies. The area chosen is north of Ulsan, the size of which is about 400km$^2$. The geology of the area consists mainly of volcanics, volcanic sediments and clastic sediments of Miocene age, underlain by the Kyungsang sediments of Cretaceous age. The mineralization occurs in tuffs or along the bedding plane of tuffaceous sediments, the main products of which are Kaolinite and Bentonite. The outcrops or mine dumps in the study area were most effectively extracted on the histrogram normalized image of TM Band 1 and 2, due to their high reflectivity. These may be confused with some artificial features, like slate roof complex of the poultry farm or cement ground, which should be classified by field checking. Detailed examination of enhancment image combined with pattern recognition techniques made enable to classify different rocks and thereby extract volcanic products which are mainly related to non-metallic ore deposits in the study area.

전남(全南) 옥매산광상(玉埋山鑛床)의 열수변질작용(熱水變質作用) 및 광석광물(鑛石鑛物)에 대한 광물학적(鑛物學的) 연구 (Hydrothermal Alteration and Mineralogy of Alunite and Kaolinite in the Ogmae Deposit, Southwest Jeonnam)

  • 김영희;문희수;김종환;유장한;김인준
    • 자원환경지질
    • /
    • 제23권3호
    • /
    • pp.287-308
    • /
    • 1990
  • The Ogmae alunite-kaolinite deposit occurs in acidic tuff, the Hwangsan Tuff, of upper Crataceous age in the Haenam volcanic field, SW Jeonnam. This deposit characterized by advanced argillic alteration formed $71.8{\pm}2.8{\sim}73.9{\pm}2.8$ Ma ago in very shallow depth environment with acid-sulfate solution. Wallrock alteration can be classified into four zones from the center to the margin of the deposit: alunite, kaolinite, illite, and silicified zone. The mineral assemblage in the alunite zone, ore zone, is alunite-quartz-pyritekaolinite. Consideration of stability relation of these minerals suggests that the maximum alteration temperature is estimated at about $250^{\circ}C$ with solution pH of 3 or below assuming that pressure does not exceed 0.3 Kb. Alunite occurs as two different types; replacement and vein-type deposit. The former one consists of fine grained alunite and the later one coarse grained and relatively pure alunite that formed by open space filling. Isomorphous substitution of Na for K in these two types of alunites range 0 to 40 %, indicating that Na/K ratio in the solution is spontaneously changed during the alteration process. Alunite which has higher Na substitution probably formed in an earlier stage while the solution sustain high Na/K ratio. K-Ar age of alunites indicate that the replacement alunite formed earlier($73.9{\pm}2.8Ma$) than the vein-type alunite($71.8{\pm}2.8Ma$). The ${\delta}^{34}S$ value of pyrite and alunite indicate that those minerals formed at isotopically nonequillibrium state. The ${\delta}^{16}O$ and ${\delta}D$ values, of kaolintics 5.0 to 9.0‰ and -54 to -99‰, respectively, indicate that those are formed by hydrothermal solution having magmatic origin which have been diluted by low ${\delta}D$ meteoric water.

  • PDF

게르마늄 복합물이 비만유도 흰쥐의 체지방 및 체중과 생화학적 변화에 미치는 영향 (The Effect of Germanium Complex on the Body Fat Weight, Body Weight and Serum Biochemical Value in Rats Fed High Fat Diets)

  • 정연권;송시환;홍동호
    • 약학회지
    • /
    • 제50권3호
    • /
    • pp.160-165
    • /
    • 2006
  • Germanium is found in a range of minerals and ores and is present in foods including beans, tomato juice, oysters, tuna and garlic. Germanium is a non-metallic element, which can exist in valence states of 2 and 4. Clinical trials and use in private practices for more than a decade have demonstrated organic germanium's efficacy in treating serious disease including cancer, arthritis and senile osteoporosis. But it was rarely reported that inorganic germanium has biological properties. STB-BM contains mineral complex, rare earth elements and a little amount of Inorganic germanium. The experiment was carried out the anti-obesity effect. To investigate anti-obesity effect of STB-BM, we measured the effect of body weight, fat weight (subcutaneous fat, epididymal fat, visceral fat, kidney fat and total fat) and serum biochemical level in rats fed high fat diets. STB-BM 35 mg/kg suppressed the increasing ratio of body weight, epididymal fat weight, visceral fat weight, total fat weight, triglyceride and LDL-cholesterol (p<0.05).

낙동광산의 광미 내 비소 거동에 대한 광물학적 연구 (A Mineralogical Study on the Arsenic Behavior in the Tailings of Nakdong Mine)

  • 이우춘;조현구;김영호;김순오
    • 한국광물학회지
    • /
    • 제22권4호
    • /
    • pp.359-370
    • /
    • 2009
  • 지표에 노출된 폐광미의 산화작용으로 인해 용출된 비소와 중금속들이 광산주변 환경에 심각한 오염을 야기할 수 있다. 본 연구는 황화광물의 산화작용과 이차 광물의 생성 및 변질과 같은 다양한 작용들이 비소의 거동에 미치는 영향을 광물학적 방법을 이용하여 고찰하였다. 연구대상 광미는 강원도 정선군에 위치한 낙동광산에서 채취하였다. 전처리한 광미로부터 자성광물과 비자성 광물을 선별한 후, 현미경 관찰을 통해 광물의 색 및 금속광택에 따라 분류하였고, X-선 회절 분석기, 에너지 분산분광기, 그리고 전자탐침미세현미경 등과 같은 다양한 기기분석들을 이용하여 광물학적 특성을 조사하였다. 문헌조사에서는 다양한 광석광물이 산출되는 것으로 알려졌지만, 산화 등과 같은 풍화작용으로 인하여 본 연구에서는 일부 광석광물들과 더불어 새롭게 형성된 이차 내지 삼차 광물들을 확인할 수 있었다. 특히 다량으로 존재했다고 알려진 자류철석은 동정되지 않았지만 특징적으로 콜로포옴 형태의 철 (산)수산화광물을 확인하였는데, 이는 자류철석의 큰 반응성으로 인하여 풍화가 급격하게 진행되어 자류철석이 모두 변질된 것을 입증한다. 뿐만 아니라 일차 광석광물인 유비철석의 균열부에 충진한 이차 광물인 스코로다이트를 확인할 수 있었는데 이러한 변질 과정을 통해 용출된 비소가 고정화되는 것으로 판단된다. 또한 이차 광물로 생성된 자로사이트가 다시 변질되어 삼차 광물인 철 (산)수산화광물이 형성되는 것도 관찰할 수 있었는데 이는 다양한 광석광물의 산화작용으로 인해 조성된 초기의 낮은 pH 환경으로부터 pH가 증가하는 환경으로의 전이를 지시한다. 이러한 환경의 변화는 이차 광물들과 주변 모암과의 작용 등에 기인하며 그 결과 이차 광물의 안정도가 떨어지게 되고 새로운 삼차 광물들이 형성된다. 이러한 과정에서 고정화된 비소가 재용출 되어 주변 환경에 확산되어질 수 있다.

공급승수를 이용한 골재산업의 유발효과 추정 연구 (A Study on Induced Effect Estimation of Aggregate and Stone Sector with Ritz-Spaulding Multipliers)

  • 정동호;김지환
    • 자원환경지질
    • /
    • 제57권2호
    • /
    • pp.129-141
    • /
    • 2024
  • 본 연구는 지역산업연관표를 이용하여 생산-생산 승수를 도출하고 비금속광물 부문과 콘크리트 제품 부문을 통해 골재의 유발효과를 추정하였다. 유발효과를 파악할 수 있도록 지역산업연관표를 활용하여 분석을 진행하였다. 골재의 유발효과를 도출함에 있어 지역산업연관표를 이용하는 것은 부문분류 문제로 인해 어려움이 있는데, 본 연구는 골재를 포함한 비금속광물 부문을 골재로 간주한 분석과 골재생산의 대부분을 수요하는 콘크리트 제품 부문을 분석함으로써 부문분류 제약으로 인한 난점을 완화하고자 하였다. 산업연관효과를 추정하는 과정에서 골재의 생산감소 상황을 전제해 진행하였으며, 콘크리트 제품 부문을 분석하는 과정에서는 골재 생산감소로 인한 콘크리트 제품 생산감소의 효과, 즉 골재 1단위 생산감소는 콘크리트 제품 부문 0.8511단위의 생산감소를 전제로 분석하였다. 지역산업연관표가 구분하고 있는 17개 광역시도에 대해 자기지역 내 및 지역간 유발효과를 산출하였다. 골재 생산감소로 인해 자기지역에서 발생하는 생산감소 효과는 지역별 평균 1.28의 유발효과를 보였으며, 타지역의 골재 생산감소로 인한 생산감소 효과는 지역별 평균 0.10의 유발효과를 보였다. 취업효과도 산출하였는데, 지역별 골재 및 콘크리트 제품 부문의 규모에 따른 차이를 나타낼 수 있도록 10% 생산감소 상황을 전제하여 취업효과를 산출하였다.

폐수에서 이온불균형문제가 생태독성에 미치는 영향 평가 (Evaluation of Toxicity Influenced by Ion Imbalance in Wastewater)

  • 신기식;김종민;이수형;이정서;이택준
    • 한국물환경학회지
    • /
    • 제34권1호
    • /
    • pp.77-83
    • /
    • 2018
  • This paper aims to evaluate the results of toxicity testing with Daphnia magna and Vibrio fischeri on wastewater samples which might be influenced by ion imbalance. The effluents from factories were found to be more toxic with high salinity levels than those from public wastewater treatment plant (WTP) and sewage treatment plant (SWP). Clion composition was highest in the effluent, in terms of percentage, which was followed by $Na^+$, $SO_4^{2-}$ and $Ca^{2+}$. $K^+$ and $Mg^{2+}$ ion was relatively low. The sensitivity of D. magna test results was higher than V. fischeri. Among samples which were proved by V. fischeri testing to be nontoxic, the composition ratio of each ion whether toxic samples or nontoxic samples which were decided by D. magna toxicity testing, were compared. $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$ ion composition ratio showed high level in nontoxic samples whereas $SO_4^{2-}$ and $Cl^-$ ion composition ratio was high in toxic samples. Accordingly, $SO_4^{2-}$ and $Cl^-$ ion seemed to be considered the ions causing toxicity in effluent. Toxicity from some categories of industries (Mining of non-metallic minerals, Manufacture of basic organic petrochemicals, Manufacture of other basic organic chemicals, Manufacture of other chemical products etc.) seemed to be influenced by salinity. The Ion concentration in influent and effluent were similar. Concentration of $Na^+$, $Cl^-$, $K^+$, $Ca^{2+}$ ions were high in influent, however $Mg^{2+}$ and $SO_4^{2-}$ ions were high in effluent.

광대역유도분극 이상 자료의 해석을 위한 새로운 등가회로 모델 (New Equivalent Circuit Model for Interpreting Spectral Induced Polarization Anomalous Data)

  • 신승욱;박삼규;신동복
    • 지구물리와물리탐사
    • /
    • 제17권4호
    • /
    • pp.242-246
    • /
    • 2014
  • 지층의 전기화학적인 물성을 이용한 광대역유도분극(SIP) 탐사는 황화광물을 포함한 금속광물탐사에 유용한 기술이다. 탐사자료로부터 IP 물성을 계산하기 위해서는 등가회로 분석을 수행한다. 분석에 사용되는 암석의 SIP 반응을 고려한 등가회로 모델은 해의 비유일성이라는 문제를 가지기 때문에 정확한 분석을 위해 적절한 모델을 설정하는 것이 매우 중요하다. 따라서 이 연구는 SIP 이상반응을 나타내는 광석의 분석에 적합한 새로운 모델을 제안하고자 하였다. 이 모델은 기존의 Dias model과 Cole-Cole model의 비교를 통하여 적합성을 검증하였다. 그 결과, Dias model과 Cole-Cole model을 이용한 분석 결과의 NRMSE 오차는 각각 10.05%와 17.03%를 보였다. 하지만 제안한 새로운 모델의 NRMSE 오차는 0.87%로 상당히 낮았기 때문에 다른 모델보다 SIP 이상 자료의 등가회로 분석에 유용하고 판단하였다.

Risk of Carbon Leakage and Border Carbon Adjustments under the Korean Emissions Trading Scheme

  • Oh, Kyungsoo
    • Journal of Korea Trade
    • /
    • 제26권2호
    • /
    • pp.45-64
    • /
    • 2022
  • Purpose - This paper examines South Korea's potential status as a carbon leakage country, and the level of risk posed by the Korean emissions trading scheme (ETS) for Korean industries. The economic effects of border carbon adjustments (BCAs) to protect energy-intensive Korean industries in the process of achieving the carbon reduction target by 2030 through the Korean ETS are also analyzed. Design/methodology - First, using the Korean Input-Output (IO) table, this paper calculates the balance of emissions embodied in trade (BEET) and the pollution terms of trade (PTT) to determine Korean industries' carbon leakage status. Analyses of the risk level posed by carbon reduction policy implementation in international trade are conducted for some sectors by applying the EU criteria. Second, using a computable general equilibrium (CGE) model, three BCA scenarios, exemption regulations (EXE), reimbursement (REB), and tariff reduction (TAR) to protect the energy-intensive industries under the Korean ETS are addressed. Compared to the baseline scenario of achieving carbon reduction targets by 2030, the effects of BCAs on welfare, carbon leakage, outputs, and trading are analyzed. Findings - As Korea's industrial structure has been transitioning from a carbon importing to a carbon leaking country. The results indicate that some industrial sectors could face the risk of losing international competitiveness due to the Korean ETS. South Korea's industries are basically exposed to risk of carbon leakage because most industries have a trade intensity higher than 30%. This could be interpreted as disproving vulnerability to carbon leakage. Although the petroleum and coal sector is not in carbon leakage, according to BEET and PTT, the Korean ETS exposes this sector to a high risk of carbon leakage. Non-metallic minerals and iron and steel sectors are also exposed to a high risk of carbon leakage due to the increased burden of carbon reduction costs embodied in the Korean ETS, despite relatively low levels of trade intensity. BCAs are demonstrated to have an influential role in protecting energy-intensive industries while achieving the carbon reduction target by 2030. The EXE scenario has the greatest impact on mitigation of welfare losses and carbon leakage, and the TAF scenario causes a disturbance in the international trade market because of the pricing adjustment system. In reality, the EXE scenario, which implies completely exempting energy-intensive industries, could be difficult to implement due to various practical constraints, such as equity and reduction targets and other industries; therefore, the REB scenario presents the most realistic approach and appears to have an effect that could compensate for the burden of economic activities and emissions regulations in these industries. Originality/value - This paper confirms the vulnerability of the Korean industrial the risk of carbon leakage, demonstrating that some industrial sectors could be exposed to losing international competitiveness by implementing carbon reduction policies such as the Korean ETS. The contribution of this paper is the identification of proposed approaches to protect Korean industries in the process of achieving the 2030 reduction target by analyzing the effects of BCA scenarios using a CGE model.

지역전략산업에 따른 특성화고 졸업자 신규수요 예측: 대전과 전남 지역 비교를 중심으로 (New demand forecast for vocational high school graduates in regional strategic industries: Focusing on comparison between Daejeon and Jeonnam)

  • 김진모;최수정;전영욱;오진주;류지은;김선근
    • 직업교육연구
    • /
    • 제36권1호
    • /
    • pp.47-75
    • /
    • 2017
  • 이 연구의 목적은 지역전략산업에 따른 특성화고 졸업자의 신규수요를 예측함으로써 지역별 중등단계 직업교육의 정책수립과 특성화고의 변화에 필요한 기초 자료를 제공하는데 있다. 이를 위해 대전과 전남을 중심으로 지역전략산업을 선정하고, 특성화고 졸업자의 신규수요를 산업별 및 직업별로 예측하였다. 연구결과는 다음과 같다. 첫째, 입지상 분석 및 변이할당 분석 결과, 대전과 전남의 전략산업은 서로 다른 양상을 보이는 것으로 확인되었다. 대전은 전남과 달리 '음식료품 및 담배 제조업', '목재, 종이, 인쇄 및 복제업', '공공행정, 국방 및 사회보장 행정'과 '전기 전자 및 정밀기기 제조업'이 전략산업에 포함되었다. 전남은 대전에서는 도출되지 않은 '기계 운송장비 및 기타 제품 제조업', '비금속광물 및 금속제품 제조업', '전기, 가스, 증기 및 수도사업', '석탄 및 석유, 화학제품 제조업', '광업', '농림어업' 등이 지역전략산업으로 도출되었다. 둘째, 대전과 전남의 특성화고 졸업자에 대한 산업별 직업별 신규수요 역시 서로 다른 양상을 보였다. 대전은 제조업을 중심으로 신규수요가 많은 반면, 전남은 서비스업을 중심으로 신규수요가 많을 것으로 예측되었다. 직업별로는 대전이 전문가 및 관련 종사자의 신규수요 비중이 많은 것과 달리, 전남은 사무 종사자와 서비스 종사자의 신규수요 비중이 많았다. 셋째, 각 직업별 신규수요 중 지역전략산업에서 발생하는 신규 수요의 비중은 대전과 전남에서 모두 높았다. 넷째, 대전과 전남의 특성화고 졸업자에 대한 신규수요를 산업의 입지계수와 변화효과 측면에서 분석한 결과, 대전과 전남 모두 총 변화효과가 정적인(+) 산업들에서 많은 신규수요를 보였다. 입지계수 측면에서는 대전과 전남이 서로 다른 결과를 보였다.