• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.211-216
• /
• 2011

According to the result of the first report and the second report of this study, it was expected that soil heating in a protected cultivation in winter season would affect the initial growth and development of fruit. Based on the result of previous study, we compared height, leaf number, leaf area, fruit weight, crop growth rate (CGR), features and quantity of cucumber for 3 months after planting between the soil heating group and the non-heating group. The result were summarized as follows: The height, leaf number, leaf area and fruit weight of cucumber in the soil heating group were 12.5%, 14.6%, 21.4% and 22.8% higher, respectively, compared to those of cucumber in the non-heating group. Although both the soil heating group and the non-heating group similarly showed an increasing pattern in CGR after transplanting, the soil heating group showed the increased CGR by 12.1% compared to that of the non-heating group. The quantity of cucumber in the soil heating group was about 26% higher than that of the non-heating group. It is assumed that the activation of initial growth and development of fruit in the heating group resulted in the increase of quantity.

• 한국물환경학회지
• /
• 제22권4호
• /
• pp.605-613
• /
• 2006

Discharge characteristics of non-point source pollutant and load amount of the discharge in the urban area were investigated in the Pungyeongjeong-stream basin and the Yongbong-stream basin in this present study. The land use of the studied basins were divided into paddy field, industrial complex area, combined sewage system, separate sewer system and point sources discharge. The descriptive statistics on the event mean concentrations (EMCs) of non-point pollutants by the the land use showed in the range of 4.43-32.28 mg/L for BOD and 8.27~56.17 mg/L for COD. The highest concentration was shown from the combined sewage system. The EMC of SS at the paddy field in the Pungyeongjeong-stream basin showed the highest range with the values ~ from 35.76 to 358.86 mg/L, which might have been influenced by a levee construction in the adjacent of the area. The relatively high concentration values of 4.43~32.28 mg/L and 1.617.13 mg/L emerged from TN and TP,respectively, at the discharge points of the both stream basins.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.256-262
• /
• 2010

This paper discussed the following. 1. After reaching the final phase of an oil-based society, a resource-saving and -recycling "Methane Energy-based Society" will come about because of limited natural resources. 2. Industrial Infrastructure Technologies which support the Methane Energy-based Society will cause a paradigm shift in the area of industrial, transportation and civilian sectors. 3. The Non-communication application technology of microwaves plays an important role as one of the core element technologies which comprise new industrial infrastructure technologies.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.299-310
• /
• 2007

It will be necessary to make proper management plans to preserve the air quality in good level for the public. In order to make these plans, source information and detail emission inventories of the city and near industrial areas should be given. However, lack of the source measurements data makes us more difficult to complete the source inventory. VOC source Inventory could be utilized for the feasibility study to estimate the contribution of VOC sources presenting to the receptor such as residential area. It may give policy maker an idea how to control the air quality, and improve their social environment in the area. This study shows data that measured VOCs concentrations from the local industrial areas in Jeonju during from May 2005 to January 2006. The samples were collected from the near sources in 7 major factories in the industrial park as well as 5 general sources in near city Jeonju area to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; chemical, food, paper, wood, metal, non-metal (glass), and painting (coating) industries. The 5 general sources are sampled from tunnel, gasoline gas station, dry cleaning shop, printing (copy) shop, and road pavement working place in urban area. To understand the near source effect at receptor, samples from the 2 receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected and analyzed for the comparison to source concentration. The mass contributions of the speciated VOC to total mass of VOCs measured from the different sources and ambient (2 receptors) were presented and discussed.

• 수산해양교육연구
• /
• 제26권3호
• /
• pp.587-596
• /
• 2014

The study aims at suggesting the direction of industrial utilization for harmful jellyfish which appears in large quantities in the Korean coastal areas. If the technology of industrial utilization for the jellyfish is developed, it will be possible to grow the industry to the export industry due to the mass appearance of jellyfish in Korean coastal areas. The industrial utilization of jellyfish should follow the direction of minimizing the damage by the jellyfish blooms and maximizing the resource recycling of the jellyfish. Therefore, Korea needs construction of infrastructure for the industrialization and promotion of R&D in order to activate the industrial utilization. Finally, the study suggested issues and tasks for promoting the industrial utilization of jellyfish as follows. First, Korea should stabilize the high quality raw material supply system. Second, mass processing technology should be developed for the industrial utilization of the jellyfish. Third, research and manual development should follow for the preparation of turning the jellyfish to the food. Fourth, extraction technology of useful non-food substance such as extracting collagen from jellyfish should be developed and accelerate the industrial utilization of non-food area.

• 한국지구과학회지
• /
• 제27권2호
• /
• pp.209-220
• /
• 2006

본 연구에서는 악취민원이 빈발한 경기도 안산시에 위치한 반월공단의 주거지역과 공단지역 등을 중심으로 주요 관리대상으로 설정된 악취성분들에 대한 환경대기 중 농도분포 특성을 2년여 기간동안 6차례에 걸쳐 조사하였다. 이들의 거동을 이해하기 위해, 시간적(오전과 오후) 및 공간적(공단 내외부의 위치) 기준으로 분포특성에 대한 비교를 시도하였다. 그 결과, 오전시간대에 비해 오후시간대에 고농도 분포가 현저하게 높은 것으로 나타났다. 이와 유사하게 공간적인 기준으로 비교한 결과도 공단 내부에서 관측한 결과에서 대부분의 성분들이 고농도를 유지하는 것을 확인할 수 있었다. 본 연구의 결과는 안산시 주변 및 공단지역의 환경대기 중에 존재하는 악취성분들이 시간적 및 공간적 기준으로 다양한 분포특성을 취한다는 것을 보여주었다.

• 한국환경보건학회지
• /
• 제38권5호
• /
• pp.398-406
• /
• 2012

Objectives: In order to investigate the relation between environmental pollution and its effect on human health in large-scale industrial complex regions, monitoring studies have been conducted since 2003. The main purpose of this Gangneung study is to produce background data which can be compared with several large-scale industrial complex regions such as Ulsan, Sihwa, Banwol, Gwangyang, Yeosu, Pohang and Cheongju Daesan industrial complexes. Methods: In this Gangneung study, 1,007 local residents were recruited and the framework of this study was designed to evaluate and monitor health effects associated with low-level but long-term exposure to environmental pollutants. A survey was performed based on personal questionnaires, medical check-ups, and allergy skin prick tests for twelve common allergens. The authors reviewed the prevalence rate of skin allergens in Gangneung compared with in large-scale industrial areas. The results are summarized as follows. Results: The diagnosis prevalence and medical treatment prevalence of asthma were lower than in industrial complex regions, but allergic rhinitis was higher. The allergy skin test prevalence was 26.0% and the most common allergens were dust mites (D. pteronysinus 16.7% and D. farinae 16.3%). Conclusions: The positive findings of the skin prick test were similar with large-scale industrial complex regions in Korea. Further study is required to find the cause of the regional differences in skin prick prevalence.

• 산업경영시스템학회지
• /
• 제24권66호
• /
• pp.37-45
• /
• 2001

Because the structure of the economy is being changed from product-oriented and company-centered economy to service-oriented and customer-centered economy, and the market competition is varying with the competition of non-price factors, the importance for customer service of logistics system is being increased. Thus, the level of customer service should be represented as an element of the logistics decision and the facility location decision. The level of customer service provided by logistics system has an effect on customers\` purchase decisions, hence on the market demand. That is, the market demand is elastic for customer service as it is influenced by product price. Considering the effect of customer service on demand, this study develops the market area which each facility will serve. That area is circular, and distance norm is considered Euclidean and Rectilinear (or Manhattan) distance norm. The market demand for product at a particular area is affected by the level of customer service that facility provides, and the relationship between the market demand and the level of customer service is represented with a mathematical function.

• 대한산업공학회지
• /
• 제27권1호
• /
• pp.69-88
• /
• 2001

In the zigzag milling operation, an important issue is to design a machining strategy which minimizes the cutting time. An important variable for minimization of cutting time is the tool path length. The tool path is divided into cutting path and non-cutting path. Cutting path can be subdivided into tool path segment and step-over, and non-cutting path can be regarded as the tool retraction. We propose a new method to determine the cutting direction which minimizes the length of tool path in a convex or concave polygonal shape including islands. For the minimization of tool path length, we consider two factors such as step-over and tool retraction. Step-over is defined as the tool path length which is parallel to the boundary edges for machining area and the tool retraction is a non-cutting path for machining any remaining regions. In the determination of cutting direction, we propose a mathematical model and an algorithm which minimizes tool retraction length in complex shapes. With the proposed methods, we can generate a tool path for the minimization of cutting time in a convex or concave polygonal shapes including islands.

• 한국경제지리학회지
• /
• 제25권1호
• /
• pp.41-59
• /
• 2022

우리나라 제조업 성장을 견인해 온 산업단지는 지역 단위에서 제조업 집적의 외부효과를 강화하는 수단으로서 기능하는가? 본 연구는 질문의 답을 위해 제조업 집적과 지역경제 생산성 간 관계에서 산업단지 조절효과를 분석함으로써 기존 선행연구에서 다루지 않은 집적효과 논의를 수행하였다. 2010-2019년 기간의 전국 시군구를 대상으로 한 불균형패널자료를 활용하여 패널분석을 실시하였으며, 전국, 수도권 그리고 비수도권을 구분하여 추정한 결과를 제시하였다. 분석 결과 비수도권의 경우 제조업 특화와 다양성 증가에 따른 긍정적 외부효과가 산업단지를 통해 더욱 강화되어 나타나는 환경이 조성된 반면 수도권에서는 산업단지의 조절효과가 제한적인 것으로 나타났다. 이러한 결과는 제조업 집적효과 극대화, 비수도권의 경제 활성화, 제조업 혁신을 위한 정책수단으로서 산업단지 역할을 재조명할 수 있는 측면에서 시사하는 바가 크다.