• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1133-1137
• /
• 2014

초음파 비선형 파라미터 ${\beta}$는 재료의 미세한 변질을 평가하는데 효과적인 인자로 알려져있다. 그런데 지금까지 대부분의 연구는 접촉식 방법을 이용하여 측정하는 연구가 수행되어왔다. 그러나, 접촉식 방법은 탐촉자와 시편사이의 접촉상태가 측정결과에 큰 영향을 미치기 때문에 측정의 재현성을 보장하기 위해 탐촉자의 접촉상태를 일정하게 유지시키기 위한 부수적인 장치가 필요하다. 이러한 불편함을 해소할 목적으로 본 연구에서는 비접촉식 기법을 도입하였다. 다만 초음파의 송신은 접촉식으로 하고 수신만 비접촉식을 적용함으로써 동일한 조건에서 접촉식으로 수신한 경우와 비접촉식으로 수신한 경우를 비교하고자 하였다. 시편은 시효 처리된 알루미늄 합금을 사용하였고, 두 방식의 측정결과 비선형 파라미터 ${\beta}$의 변화는 유사하게 나타났다. 이로부터 초음파 비선형 특성의 변화를 비접촉식 수신방법으로 용이하게 평가할 수 있음을 확인하였다.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.652-657
• /
• 2013

In this study, we developed a counting method for non-contact ID cards using an optical fiber displacement sensor instead of the traditionally used friction counting method. The proposed method has the advantage of high speed and automated measurement. For counting non-contact ID cards, an H-type optical fiber sensor, jig part, and counting program are developed separately to build the system and adjust it. Through the experimental test results, it was confirmed that counting is possible with one type of international ID card and one type of financial security card based on ISO7810. Furthermore, by applying the proposed method to 100 ID cards 100 times repeatedly, it was confirmed that it has high accuracy and an error ratio of 0%. We experimentally demonstrated that the proposed counting method for non-contact ID cards using an optical fiber displacement sensor can perform measurements with high accuracy and high speed.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.106-111
• /
• 1999

This study discusses a non-contact optical technique electronic, electronic speckle pattern interferometry(ESPI) that is well suited for in-plane and out-of-plane deformation measurement Used as specimen which has the boundary condition of two clamped parallel edges composite material AS4/PEEK[30/-30/90]s was analyzed by ESPI to determined the characteristics of tensile and vibration. These are quantitativly compared with the result of FEM analysis. Finally the results of this study are briefly summarized as follows : (1) In the in-plane strain analysis by comparison of theoretical results with experimental results qualitatively we confirmed that measurement errors are within 3 % in case of accuracy (2) From comparison of experimental vibration modes with numerical vibration mode shapes by the FEM analysis quantitatively we confirmed that vibration mode measurement by the ESPI has high accuacy.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.149-154
• /
• 2001

This study discusses a non-contact optical technique, electronic speckle pattern interferometry(ESPI), that is well suited for a deformation measurement of structure. Phase shifting method and unwrapping method have used to make deformation quantitative widely. In this paper, a previous numerical formula for phase shifting method is reconstructed in addition to least square fitting method to improve sensitivity and phase unwrapping based on vertical-horizontal scanning method is applied to analyze in-plane and out-of-plane deformation quantitatively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.377-382
• /
• 1995

Conventional measurement methods using ultrasonic wave or x-ray, eddy current for non-destructive testing(NDT) in nuclear power plants and other industrial plants have been performed as the method of contact with objects to be inspected. With this reason these methods have been taken relatively much time and the inspected area is limited by the location of probe or film. But holographic interferometry which is a non-contact optical measurement method using a coherent light source has an advantage that the quantitative measurement can be performed at a time. In this paper a new method using holographic interferometry and image processing for detecting internal flaws of pressure vessels is presented.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2646-2653
• /
• 1993

A rotational torque calibration system is developed to measure rotational torque of power generating systems and to calibrate non-contact rotational torque measurement systems. The maximum capacity of the developed system is 4.5 N-m. It is composed of a DC motor, a DC generator, a control system, a master torque cell, a slip ling/brush set, supporters, a bed etc. The control system is characterized by the closed-loop control with differential intergrator. Rotational torque measurement test and unit response test are conducted to estimate the accuracy of the developed system. It is found that system maintain high consistency and accuracy with the maximum error of 0.25%, Therefore the developed system can be used to measure the rotational torque of power generating systems and to calibrate non-contact rotational torque measurement systems.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.37-43
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.53-54
• /
• 2009

• 품질경영학회지
• /
• 제37권2호
• /
• pp.1-11
• /
• 2009

Recently, many companies have been very interested in CRM(Customer Relationship Management). Most companies have been also considering the contact center as a key CRM channel, because it is a contact point between customers and companies. It turns out that the contact center handles over 70% of all customer-company interactions and the success or failure of a company can be determined by the customer satisfaction with contact center experiences. Despite of the strategic importance of the contact center, there has been few empirical study on the efficiency of contact center operations in the literature. One of the main purposes of this study is to evaluate the efficiency of contact centers so as to not only identify the current status of contact center operations, but also suggest ways to improve operational efficiency. For this purpose, we apply a non-parametric efficiency measurement method, DEA (Data Envelopment Analysis), to 57 domestic contact centers in order to compare their relative efficiency. It is expected that the measurement methods suggested in this study can be applied to various issues such as service KS certification, outsourcing service management, and the productivity analysis of service personnel.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.249-253
• /
• 2008

The indirect-contact ECG (IDC-ECG) was introduced by a prior study for daily non-intrusive measurements. To improve the signal quality and to extend the application area of IDC-ECG, close study of the frequency characteristics of the IDC-ECG is necessary. In this study, the frequency response of the active electrode for several sample clothes was measured under conditions of actual IDC-ECG measurement with human body. Higher gain in low frequency range than expected by prior study was observed. In addition to it, wide variation in gain according to the cloth type in the low frequency range was observed. Variation in gain caused by moisture variation in the clothes was also observed. This study shows that the parallel R-C connection is proper for electrode model and the resistive factor is influenced by moisture in the clothes. This study is the first that provides the frequency response of the electrode in the actual indirect-contact ECG measurement and it is expected that the results will be helpful to improve the indirect-contact ECG method.